Recyclers see new group as key to issues in China

By Steve Toloken
Staff Reporter / Asia Bureau Chief

Published: November 13, 2012 6:00 am ET

Related to this story

Topics Public Policy, Sustainability, Recycling

BEIJING (Nov. 13, 1:25 p.m. ET) — Beyond dealing with an economic downturn and much tougher government regulations aimed at cutting pollution from their factories, China’s plastics recyclers are also trying to sort out a family squabble about who can best represent the industry.

A new industry trade group has cropped up, the China Scrap Plastics Association, to compete with an older, more established group that is part of the plastics industry’s biggest umbrella trade group, the Beijing-based China Plastics Processing Industry Association.

At a recent conference in Beijing, the newcomers at the CSPA made their case. In public comments at the event, Chinese-American plastic recycling executive Paul Yan waded directly into the arguments, saying the separation of the industry is not good. Then he endorsed the new group.

“I think this association can provide better service,” said Yan, president of Rancho Dominguez, Calif.-based PolyWin Corp., which has three factories in China. “As an association member, I just hope that one of you can strengthen the communication with the government.”

In an interview after his public comments, Yan told Plastics News that “I think this one can be better. I don’t say the other one is bad.”

He said it’s a topic actively discussed among Chinese recyclers now, and it’s confusing to many in the industry.

Adding to the confusion, the Beijing-based CSPA has chosen the same name for its conference, ChinaRePlas, as the CPPIA group, called the Plastics Recycling Committee of the CPPIA. PRC-CPPIA has organized ChinaReplas conferences annually since 2006. CSPA started this year.

The PRC-CPPIA says CSPA uses the ChinaReplas name to intentionally mislead the industry and build on work CPPIA did building the conference.

CSPA says it uses the name because a consulting company run by CSPA manager Jason Wang was involved in organizing all the previous Replas events under contract to CPPIA.

Wang was a top staffer at the PRC-CPPIA until he left in late 2011 in a dispute with association leaders and formed CSPA along with some companies.

CSPA held its Replas Nov. 6-7 in Beijing, while the PRC-CPPIA group held its Replas Nov 5-6 in Ningbo.

A board member of the CSPA, Alex Xie, an executive with Hong Kong-based plastic recycler Lung Shing International Group Ltd., said the new group formed out of unhappiness with the CPPIA group. He said competition among trade associations is normal.

The plastics recycling industry is a very sensitive industry, and has to be very close to the government, he said. The CPPIA group did not do a good enough job sharing information about government policies, he said.

CSPA companies “were not so happy with the old association,” he told Plastics News in an interview at the Beijing conference. He said the main purpose of an association is to work with government on policies.

“If we cannot get that, the association is not helpful,” Xie said.

Beyond the leadership circles of the groups, however, the topic, if confusing, did not seem to matter much with companies.

Several smaller or middle-sized Chinese recycling companies at the event said they either had not heard of the fight between the two groups, or if they had, were not concerned, preferring to focus their attention at the conference on making new business contacts.

CSPA officials said their event had 400 participants while the Ningbo event said it had about 300.

“Of course we’re a little confused,” said Matthias Erdmannsdoerfer, president of Nashville, Tenn.-based National Recovery Technologies Inc., referring to the two events.

The company chose Beijing to exhibit its optical sorting equipment because of feedback from customers and potential customers, and felt the event provided them with “very good” customer contacts. China is the company’s largest export market, he said.

One company that exhibited at both Ningbo and Beijing, however, said it felt the Ningbo event was better.

The company declined to be quoted by name because it did not want to upset either conference organizer, but a salesperson said: “I think the Ningbo fair was more interesting than this fair because Ningbo was bigger and you got more contacts.”

CSPA held its Replas Nov. 6-7 in Beijing, while the PRC-CPPIA group held its Replas Nov 5-6 in Ningbo. Plastics News attended both events. For coverage of the Ningbo event, see www.plasticsnews.com/china/english.


Comments

Recyclers see new group as key to issues in China

By Steve Toloken
Staff Reporter / Asia Bureau Chief

Published: November 13, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Some medical devices could get faster approval with new FDA rules

April 22, 2014 7:41 pm ET

The U.S. Food and Drug Administration is proposing an expedited approval for medical devices for devices aimed at the diagnosis or treatment of...    More

Image

Two Ohio groups team up to accelerate development of future medical devices

April 22, 2014 9:55 am ET

The Austen BioInnovation Institute in Akron and Cleveland-based design specialists Nottingham Spirk announced a strategic partnership that the two...    More

Image

Coffee roaster looks to improve footprint of single cup systems

April 22, 2014 1:30 pm ET

One of the largest coffee and tea manufacturers in North America has introduced a single-serve beverage capsule intended to curb the waste created by ...    More

Two Eastman buildings among 10 biggest energy savers in national contest

April 22, 2014 11:35 am ET

Two offices at the headquarters of Eastman Chemical Co. in Kingsport, Tenn., ranked in the Top 10 for energy efficiency in the latest Energy Star...    More

Europe's bag use still expected to climb despite possible bag restrictions

April 22, 2014 9:29 am ET

Ceresana, a Germany-based research company, has released a report forecasting that by 2020 the sales volume of bags and sacks in Europe will reach 9.1...    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report provides analysis and discussions of economic and political conditions, market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as strategies being implemented by thermoformed packaging companies. In addition, there are reviews of 25 leading thermoformers in the packaging segment, assessing their growth initiatives and performance metrics over 10 years.

Learn more

Automotive Market Review and Outlook 2014 The Americas

This 75-page report features in-depth analysis of the automotive industry for the Americas. It includes discussions of market trends, legislative/regulatory activity impacting production and threats as well as design strategies being implemented by the major automakers. Detailed charts and data tables outline North American automotive production over the last five years.

Learn more

Plastics Building & Construction Market Review and Outlook 2014 with MS Excel chart data

This report provides in-depth analysis of the plastic building and construction market for North America, including discussions of trends, opportunities, threats and the latest developments in construction trends that impact plastics processors.

Learn more

Upcoming Plastics News Events

May 6, 2014 - May 8, 2014Plastics in Medical Devices 2014

May 12, 2014 - May 12, 2014Plastics News Brazil Pharma Summit

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

February 3, 2015 - February 7, 2015Plastics News Executive Forum 2015

More Events