Phillips-Medisize expands Czech Republic medical device plant

Mike Verespej

Published: November 14, 2012 6:00 am ET

Related to this story

Topics Medical, Injection Molding, Pipe/Profile/Tubing

HUDSON, WIS. (Nov. 14, 12 p.m. ET) — Phillips-Medisize Corp. has increased the size of its Czech Republic manufacturing plant by more than one-third, adding both new clean room space and additional capability to assemble single-use medical devices, drug delivery devices and respiratory products.

“The majority of the expansion was to accommodate more assembly space” and was driven by new business the company captured “in the finished device category of the general medical/surgical market,” President and CEO Matt Jennings told Plastics News.

The expansion adds 10,000 square feet of space, including 2,000 square feet of clean room space. That boosts the size of the plant in the town of Trhove Sviny — which is just north of the Austrian border — to 38,500 square feet.

A small portion of the expansion will be for multivac packaging lines, Jennings said.

“The expansion is a significant increase in our capability to manufacture and assemble finished products ... as well as in our process engineering capabilities,” Jennings said. The expansion was completed earlier this quarter.

By the end of February, employment at the plant will be 60 percent higher than it was last spring, Jennings said. Current employment is 138. “We are hiring.”

The company’s Czech Republic plant has Class 7 and 8 clean rooms, plastic and liquid injection molding capabilities, and the ability to assemble finished medical devices. It also does catheter extrusion.

“Our Czech facility is an important part of our strategy of providing state-of-the-art medical facilities, equipped with the latest technologies, to our customers in regions around the world,” Jennings said.

Phillips-Medisize has annual sales of nearly $500 million, with 75 percent of that coming from drug delivery, medical device and diagnostic products.

The company is headquartered in Hudson, Wis., and employs more than 2,100 in 19 locations throughout the United States, Europe and China. It also has design centers in Wisconsin, California, and the Netherlands.

Matt Jennings, president & CEO of Phillips-Medisize Corp., will speak at Plastics in Medical Devices 2013, scheduled for May 13-15 in the Boston suburb of Waltham, Mass.


Comments

Phillips-Medisize expands Czech Republic medical device plant

Mike Verespej

Published: November 14, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Ohio molder sold to private equity firm

August 19, 2014 5:23 pm ET

Private equity firm TVV Capital of Nashville has acquired injection molder Design Molded Plastics Inc. for an undisclosed price.    More

Image

Germany's Bolta building $50 million plating plant in Alabama

August 19, 2014 2:21 pm ET

A German company is setting up a plastics chrome plating plant in Tuscaloosa, Ala.    More

Image

Report: Graham looking to sell Infiltrator

August 19, 2014 11:32 am ET

Private equity group Graham Partners Inc. reportedly is ready to sell septic tank maker Infiltrator Systems Inc. after holding the Old Saybrook, Conn....    More

Image

Mexichem buys HDPE pipe extruder Dura-Line Corp.

August 18, 2014 2:05 pm ET

MEXICO CITY — PVC pipe and specialty chemicals maker Mexichem SAB de CV said Monday it has agreed to buy Dura-Line Corp., a prominent...    More

Image

Electrolux a suitor for GE Appliances

August 15, 2014 12:58 pm ET

Swedish appliance conglomerate AB Electrolux has confirmed it is one of the suitors for a possible acquisition of GE Appliances.    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report analyzes economic and market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as growth strategies being implemented by thermoformed packaging companies.

Learn more

Pipe, Profile & Tubing Extrusion in North America 2014

U.S. demand for extruded plastics is expected to grow by 3 percent in 2014, with PVC remaining the largest segment.

Plastic pipe will post the strongest gains through 2018, continuing to take market share from competing materials in a range of markets.

Our latest market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Learn more

2014 Injection Molding Industry Report

GROWTH, OPPORTUNITY IN SIGHT FOR INJECTION MOLDERS IN 2014

In the wake of the economic turbulence earlier in this decade, molders today find themselves in much better shape. Molders are gaining a competitive advantage by investing in people, equipment and seeking inroads into new markets on a global scale.

Growth in the injection molding industry is going to be driven by low financing costs and a continued move to reshore some business.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events