Phillips-Medisize expands Czech Republic medical device plant

Mike Verespej

Published: November 14, 2012 6:00 am ET

Related to this story

Topics Medical, Injection Molding, Pipe/Profile/Tubing

HUDSON, WIS. (Nov. 14, 12 p.m. ET) — Phillips-Medisize Corp. has increased the size of its Czech Republic manufacturing plant by more than one-third, adding both new clean room space and additional capability to assemble single-use medical devices, drug delivery devices and respiratory products.

“The majority of the expansion was to accommodate more assembly space” and was driven by new business the company captured “in the finished device category of the general medical/surgical market,” President and CEO Matt Jennings told Plastics News.

The expansion adds 10,000 square feet of space, including 2,000 square feet of clean room space. That boosts the size of the plant in the town of Trhove Sviny — which is just north of the Austrian border — to 38,500 square feet.

A small portion of the expansion will be for multivac packaging lines, Jennings said.

“The expansion is a significant increase in our capability to manufacture and assemble finished products ... as well as in our process engineering capabilities,” Jennings said. The expansion was completed earlier this quarter.

By the end of February, employment at the plant will be 60 percent higher than it was last spring, Jennings said. Current employment is 138. “We are hiring.”

The company’s Czech Republic plant has Class 7 and 8 clean rooms, plastic and liquid injection molding capabilities, and the ability to assemble finished medical devices. It also does catheter extrusion.

“Our Czech facility is an important part of our strategy of providing state-of-the-art medical facilities, equipped with the latest technologies, to our customers in regions around the world,” Jennings said.

Phillips-Medisize has annual sales of nearly $500 million, with 75 percent of that coming from drug delivery, medical device and diagnostic products.

The company is headquartered in Hudson, Wis., and employs more than 2,100 in 19 locations throughout the United States, Europe and China. It also has design centers in Wisconsin, California, and the Netherlands.

Matt Jennings, president & CEO of Phillips-Medisize Corp., will speak at Plastics in Medical Devices 2013, scheduled for May 13-15 in the Boston suburb of Waltham, Mass.


Comments

Phillips-Medisize expands Czech Republic medical device plant

Mike Verespej

Published: November 14, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Netstal, Electra Form team up for PET preform partnership

November 20, 2014 3:15 pm ET

The Netstal division of Krauss-Maffei Corp. is teaming up with Electra Form Industries in a partnership to offer PET preform machines and molds as a...    More

Image

Thomson Plastics opens N.C. plant

November 20, 2014 3:12 pm ET

Custom injection molder Thomson Plastics Inc. has opened a new manufacturing facility in Lexington, N.C.    More

Image

Molder Carclo expands in China, chasing medical growth

November 19, 2014 3:44 pm ET

U.K.-based injection molder Carclo plc is “significantly” expanding its Chinese medical manufacturing capacity with a new factory, as the ...    More

Deimling/Jeliho expanding molding, mold making operations

November 19, 2014 3:18 pm ET

Deimling/Jeliho Plastics Inc., a custom thermoplastics injection molder and contract manufacturer located in Amelia, Ohio, is expanding its molding...    More

Image

Cy Plastics invests in machinery, space

November 19, 2014 2:17 pm ET

Seeking a more efficient configuration, custom molder Cy Plastics Inc. invested over $500,000 in the past year, adding more machinery including a 350-...    More

Market Reports

Plastics in Brazil - State of the Industry Report

This in-depth report examines the Brazilian plastics industry from a historical and geographical context. Our analysts provide insight on economic trends and forecasts, growing manufacturing sectors that utilize plastics, private investment opportunities, market environment challenges, and innovations in R&D.

Data tables and charts on producer prices, trade, plastics production and end market indicators is also included.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molders Market Report & Ranking 2014

This special package contains our 132-page 2014 Market Report on the Injection Molding segment and our exclusive 2014 RANKINGS database of 500+ Injection Molders for a discounted package price.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

October 27, 2015 - October 29, 2015Plastics Financial Summit - New York - 2015

More Events