Phillips-Medisize expands Czech Republic medical device plant

Mike Verespej

Published: November 14, 2012 6:00 am ET

Related to this story

Topics Medical, Injection Molding, Pipe/Profile/Tubing

HUDSON, WIS. (Nov. 14, 12 p.m. ET) — Phillips-Medisize Corp. has increased the size of its Czech Republic manufacturing plant by more than one-third, adding both new clean room space and additional capability to assemble single-use medical devices, drug delivery devices and respiratory products.

“The majority of the expansion was to accommodate more assembly space” and was driven by new business the company captured “in the finished device category of the general medical/surgical market,” President and CEO Matt Jennings told Plastics News.

The expansion adds 10,000 square feet of space, including 2,000 square feet of clean room space. That boosts the size of the plant in the town of Trhove Sviny — which is just north of the Austrian border — to 38,500 square feet.

A small portion of the expansion will be for multivac packaging lines, Jennings said.

“The expansion is a significant increase in our capability to manufacture and assemble finished products ... as well as in our process engineering capabilities,” Jennings said. The expansion was completed earlier this quarter.

By the end of February, employment at the plant will be 60 percent higher than it was last spring, Jennings said. Current employment is 138. “We are hiring.”

The company’s Czech Republic plant has Class 7 and 8 clean rooms, plastic and liquid injection molding capabilities, and the ability to assemble finished medical devices. It also does catheter extrusion.

“Our Czech facility is an important part of our strategy of providing state-of-the-art medical facilities, equipped with the latest technologies, to our customers in regions around the world,” Jennings said.

Phillips-Medisize has annual sales of nearly $500 million, with 75 percent of that coming from drug delivery, medical device and diagnostic products.

The company is headquartered in Hudson, Wis., and employs more than 2,100 in 19 locations throughout the United States, Europe and China. It also has design centers in Wisconsin, California, and the Netherlands.

Matt Jennings, president & CEO of Phillips-Medisize Corp., will speak at Plastics in Medical Devices 2013, scheduled for May 13-15 in the Boston suburb of Waltham, Mass.


Comments

Phillips-Medisize expands Czech Republic medical device plant

Mike Verespej

Published: November 14, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Globalization brings sizable growth, primarily in Asia

November 25, 2014 1:40 pm ET

In 1990, the year after Plastics News published our first issue, there were 33,000 injection molding machines sold worldwide. Fast forward to 2013,...    More

Image

Uni Cap to build cap molding plant in Jordan

November 25, 2014 12:57 pm ET

The Persian Gulf's largest molder of caps and closures is investing $10 million in a new factory near Amman, Jordan, as part of an effort to boost...    More

Image

Deal adds U.K. plant to DelStar

November 25, 2014 12:47 pm ET

Schweitzer-Mauduit International Inc. (SWM) is acquiring certain assets from the advanced wound management division of London-based Smith & Nephew...    More

Image

Canada's Papp Plastics is eyeing big opportunities with JV in Mexico

November 24, 2014 4:11 pm ET

Canadian injection molder and turnkey solution provider Papp Plastics & Distributing Ltd. will open an $11 million to $12 million joint venture...    More

Image

AMA Plastics adds presses, changes management structure

November 24, 2014 3:57 pm ET

AMA Plastics Inc. has strengthened its management structure, received recognition for entrepreneurship, achieved quality improvements and added three ...    More

Market Reports

Plastics in Brazil - State of the Industry Report

This in-depth report examines the Brazilian plastics industry from a historical and geographical context. Our analysts provide insight on economic trends and forecasts, growing manufacturing sectors that utilize plastics, private investment opportunities, market environment challenges, and innovations in R&D.

Data tables and charts on producer prices, trade, plastics production and end market indicators is also included.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molders Market Report & Ranking 2014

This special package contains our 132-page 2014 Market Report on the Injection Molding segment and our exclusive 2014 RANKINGS database of 500+ Injection Molders for a discounted package price.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

October 27, 2015 - October 29, 2015Plastics Financial Summit - New York - 2015

More Events