Phillips-Medisize expands Czech Republic medical device plant

Mike Verespej

Published: November 14, 2012 6:00 am ET

Related to this story

Topics Medical, Injection Molding, Pipe/Profile/Tubing

HUDSON, WIS. (Nov. 14, 12 p.m. ET) — Phillips-Medisize Corp. has increased the size of its Czech Republic manufacturing plant by more than one-third, adding both new clean room space and additional capability to assemble single-use medical devices, drug delivery devices and respiratory products.

“The majority of the expansion was to accommodate more assembly space” and was driven by new business the company captured “in the finished device category of the general medical/surgical market,” President and CEO Matt Jennings told Plastics News.

The expansion adds 10,000 square feet of space, including 2,000 square feet of clean room space. That boosts the size of the plant in the town of Trhove Sviny — which is just north of the Austrian border — to 38,500 square feet.

A small portion of the expansion will be for multivac packaging lines, Jennings said.

“The expansion is a significant increase in our capability to manufacture and assemble finished products ... as well as in our process engineering capabilities,” Jennings said. The expansion was completed earlier this quarter.

By the end of February, employment at the plant will be 60 percent higher than it was last spring, Jennings said. Current employment is 138. “We are hiring.”

The company’s Czech Republic plant has Class 7 and 8 clean rooms, plastic and liquid injection molding capabilities, and the ability to assemble finished medical devices. It also does catheter extrusion.

“Our Czech facility is an important part of our strategy of providing state-of-the-art medical facilities, equipped with the latest technologies, to our customers in regions around the world,” Jennings said.

Phillips-Medisize has annual sales of nearly $500 million, with 75 percent of that coming from drug delivery, medical device and diagnostic products.

The company is headquartered in Hudson, Wis., and employs more than 2,100 in 19 locations throughout the United States, Europe and China. It also has design centers in Wisconsin, California, and the Netherlands.

Matt Jennings, president & CEO of Phillips-Medisize Corp., will speak at Plastics in Medical Devices 2013, scheduled for May 13-15 in the Boston suburb of Waltham, Mass.


Comments

Phillips-Medisize expands Czech Republic medical device plant

Mike Verespej

Published: November 14, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

RPC Group buying Iceland's Promens

November 27, 2014 8:46 am ET

In a major acquisition that combines two rigid packaging companies with international footprints, RPC Group plc has signed a 399 million euro ($497...    More

Image

Large part molder EnviroTech in 'growth mode,' adds space, equipment

November 26, 2014 9:54 am ET

Salt Lake City-based EnviroTech Molded Products Inc. is adding new equipment and expanding its factory as it gains business in some of its...    More

Image

Globalization brings sizable growth, primarily in Asia

November 25, 2014 1:40 pm ET

In 1990, the year after Plastics News published our first issue, there were 33,000 injection molding machines sold worldwide. Fast forward to 2013,...    More

Image

Uni Cap to build cap molding plant in Jordan

November 25, 2014 12:57 pm ET

The Persian Gulf's largest molder of caps and closures is investing $10 million in a new factory near Amman, Jordan, as part of an effort to boost...    More

Image

Deal adds U.K. plant to DelStar

November 25, 2014 12:47 pm ET

Schweitzer-Mauduit International Inc. (SWM) is acquiring certain assets from the advanced wound management division of London-based Smith & Nephew plc...    More

Market Reports

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 billion plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our analysts provide insight on business trends, foreign investment, top end markets and plastics processing activity. The report also provides important data on exports, production, employment and value of plastics products manufactured.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

October 27, 2015 - October 29, 2015Plastics Financial Summit - New York - 2015

More Events