Phillips-Medisize expands Czech Republic medical device plant

Mike Verespej

Published: November 14, 2012 6:00 am ET

Related to this story

Topics Medical, Injection Molding, Pipe/Profile/Tubing

HUDSON, WIS. (Nov. 14, 12 p.m. ET) — Phillips-Medisize Corp. has increased the size of its Czech Republic manufacturing plant by more than one-third, adding both new clean room space and additional capability to assemble single-use medical devices, drug delivery devices and respiratory products.

“The majority of the expansion was to accommodate more assembly space” and was driven by new business the company captured “in the finished device category of the general medical/surgical market,” President and CEO Matt Jennings told Plastics News.

The expansion adds 10,000 square feet of space, including 2,000 square feet of clean room space. That boosts the size of the plant in the town of Trhove Sviny — which is just north of the Austrian border — to 38,500 square feet.

A small portion of the expansion will be for multivac packaging lines, Jennings said.

“The expansion is a significant increase in our capability to manufacture and assemble finished products ... as well as in our process engineering capabilities,” Jennings said. The expansion was completed earlier this quarter.

By the end of February, employment at the plant will be 60 percent higher than it was last spring, Jennings said. Current employment is 138. “We are hiring.”

The company’s Czech Republic plant has Class 7 and 8 clean rooms, plastic and liquid injection molding capabilities, and the ability to assemble finished medical devices. It also does catheter extrusion.

“Our Czech facility is an important part of our strategy of providing state-of-the-art medical facilities, equipped with the latest technologies, to our customers in regions around the world,” Jennings said.

Phillips-Medisize has annual sales of nearly $500 million, with 75 percent of that coming from drug delivery, medical device and diagnostic products.

The company is headquartered in Hudson, Wis., and employs more than 2,100 in 19 locations throughout the United States, Europe and China. It also has design centers in Wisconsin, California, and the Netherlands.

Matt Jennings, president & CEO of Phillips-Medisize Corp., will speak at Plastics in Medical Devices 2013, scheduled for May 13-15 in the Boston suburb of Waltham, Mass.


Comments

Phillips-Medisize expands Czech Republic medical device plant

Mike Verespej

Published: November 14, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Newell Rubbermaid expanding production, employment in Kansas

March 3, 2015 3:31 pm ET

Newell Rubbermaid Inc. is expanding and extending plastics molding technologies at its Winfield, Kan., manufacturing plant and distribution center.    More

Image

Snow blamed for roof collapse at Pennsylvania pipe maker

March 3, 2015 4:51 pm ET

Heavy snow is likely to blame for bringing down part of the roof of a Charter Plastics Inc. facility in Titusville, Pa., about 3 p.m. March 3.    More

Image

Best Places To Work: No. 5, Plastic Components Inc.

March 3, 2015 2:50 pm ET

Plastic Components Inc. had a busy 2014: It built a house, earned a patent, spun off a business, added presses and expanded its staff.    More

Image

Best Places To Work: No. 2, B&B Molders LLC

March 3, 2015 1:56 pm ET

Britt Murphey is trying to retire. But he's just having too much fun.    More

Image

Best Places To Work: No. 4, Ayanna Plastics & Engineering Inc.

March 3, 2015 2:39 pm ET

Ayanna Plastics & Engineering Inc., a Clearwater, Fla., injection molder and toolmaker, ranks No. 4 on the Plastics News Best Places to Work list. The...    More

Market Reports

Flexible Packaging Trends in North America

North America represents about 30 percent of the global consumption of flexible packaging. Annual growth in this region is forecast at 4 percent during the next 5 years.

For more insight on growth opportunities, drivers of growth and the outlook for 2015, download this report.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 billion plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our analysts provide insight on business trends, foreign investment, top end markets and plastics processing activity. The report also provides important data on exports, production, employment and value of plastics products manufactured.

Learn more

Upcoming Plastics News Events

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events