Bway sees practicality in sustainability

Published: November 15, 2012 6:00 am ET

Related to this story

Topics Sustainability, Packaging, Injection Molding

CHICAGO (Nov. 15, 10:45 a.m. ET) — Container manufacturer BWay Corp. is hoping its emphasis on sustainability will lead to an increase in profits, but instead of rolling out new products or policies, the company is promoting what’s its been offering all along.

“Sustainability is just something that we do,” said Lisa Merritt, marketing coordinator at the Atlanta-based company.

BWay makes more than 270 different products from metal, plastic and hybrid materials. All of them can be recycled and many of the plastic containers can be made with up to 30 percent post-consumer resin, she said by phone.

The company has also worked to make containers light weight without comprising their capabilities, she added.

BWay’s most innovative and sustainable container is its open-head Eco-Pail, Merritt said.

The 5-gallon pail, designed for industrial uses, is made from high density polyethylene. The container is designed to be recycled without removing any components — its cover uses in-seal molded technology, eliminating the need for a rubber gasket, and has a handle made from recycled resin instead of metal.

The pail can contain up to 50 percent post-consumer recycled resin and producing it takes less energy and results in fewer carbon emissions.

Merritt said that BWay also employs sustainable practices at its plants, adding that the company outlines its corporate responsibility plans on its website.

According to the site, BWay’s plants run all-electric equipment, have processes in place to recycle water and industrial solvents and, over time, have significantly lowered emissions of volatile organic compounds and hazardous air pollutants.

It just makes business sense to reduce energy use, reduce your reliability on natural resources and reduce emissions, Merritt said.

And companies need to offer innovative products that use less resources – “it’s just something you have to do these days,” she said.

BWay displayed its containers, including the Eco-Pail, and promoted its corporate responsibility message at Pack Expo 2012, held Oct. 28-31 in Chicago.

We had good feedback from customers; “they were impressed by the things we do behind the scenes,” Merritt said.

BWay, based in Atlanta, has 11 plastics plants, 22 overall, and total sales of $1.2 billion. According to Plastics News’ annual rankings, it is North America’s 13th largest injection molder and is No. 26 in the ranking of North American blow molders.


Comments

Bway sees practicality in sustainability

Published: November 15, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Large part molder EnviroTech in 'growth mode,' adds space, equipment

November 26, 2014 9:54 am ET

Salt Lake City-based EnviroTech Molded Products Inc. is adding new equipment and expanding its factory as it gains business in some of its...    More

Image

SPI hopes to build on EPS recycling

November 26, 2014 6:00 am ET

Successfully recycling expanded polystyrene can be a challenge, there's no doubt about that. EPS, however, has value, is in demand and deserves to be ...    More

Image

Pan-European plastics recycling show scheduled for 2015

November 26, 2014 6:00 am ET

Europe is to get its first pan-European exhibition and conference aimed at the region's plastics recycling industry next year.    More

Image

Irish packaging group Smurfit Kappa opens film plant in Spain

November 26, 2014 6:00 am ET

Global packaging group Smurfit Kappa Group plc has responded to growing demand for its bag-in-box liquid container/dispensers by opening a new plant...    More

Image

Globalization brings sizable growth, primarily in Asia

November 25, 2014 1:40 pm ET

In 1990, the year after Plastics News published our first issue, there were 33,000 injection molding machines sold worldwide. Fast forward to 2013, an...    More

Market Reports

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 billion plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our analysts provide insight on business trends, foreign investment, top end markets and plastics processing activity. The report also provides important data on exports, production, employment and value of plastics products manufactured.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

October 27, 2015 - October 29, 2015Plastics Financial Summit - New York - 2015

More Events