Victrex project looks at cutting monomer waste

Published: November 15, 2012 6:00 am ET

Related to this story

Topics Sustainability, Materials, Suppliers

THORNTON, ENGLAND (Nov. 15, 10:15 a.m. ET) – Victrex plc, the Thornton-based producer of polyether ether ketone, and the University of Manchester have started a project to produce a monomer raw material with the aim of reducing waste and energy use in the production process.

Victrex said: “Always looking to improve, Victrex has instigated this project in response to an increasing requirement for monomer raw material and a desire to be more sustainable. The idea is to create less waste in the production of the raw material, providing a higher purity which is more environmentally friendly and energy and resource efficient. This issue presents a significant challenge for Victrex and the industry as a whole.”

The Technology Strategy Board is funding a feasibility study in the project through its program called “Sustainable Manufacturing for the Process Industry.”

Initially Victrex planned to manage the project internally, but given the challenges involved, it worked with the Knowledge Centre for Materials Chemistry (KCMC) to identify academic capabilities in the United Kingdom that would support the project.

KCMC, which acts as a bridge between academia and industry, helped Victrex identify the University of Manchester as its partner for the project and also helped coordinate a work program across departments.

The feasibility study will last for nine months. Victrex is investing in capital equipment that will be used in the university department. If the study is successful, a second stage would involve and industrial pilot plant to produce material in kilogram quantities.

Victrex said it could not reveal details of what the project will focus on due to confidentiality reasons.


Comments

Victrex project looks at cutting monomer waste

Published: November 15, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

PE suppliers go after oxo-biodegradable technology in Mexico

July 31, 2014 1:12 pm ET

Mexican industry defends itself, calling claims 'misleading'    More

Bioplastic created using rice starch

July 31, 2014 10:40 am ET

The new transparent, biodegradable material has a high degree of mechanical strength and good thermal resistance.    More

Image

DC banning PS foam containers

July 30, 2014 2:34 pm ET

Washington D.C. Mayor Vincent Gray signed into law on July 29 a bill that will ban polystyrene foam food and drink containers from the District.    More

Image

UMass Lowell hosts collaborative research meeting for future projects

July 30, 2014 11:54 am ET

The University of Massachusetts at Lowell recently hosted a seminar, which was billed as a collaborative research meeting between Dow Chemical Co.,...    More

Image

North American robot sales set record

July 30, 2014 4:46 pm ET

The North American robotics sector is off to its fastest start ever, shattering last year's first-half record, with a first-half 2014 of 14,135 robots...    More

Market Reports

Pipe, Profile & Tubing Extrusion in North America 2014

U.S. demand for extruded plastics is expected to grow by 3 percent in 2014, with PVC remaining the largest segment.

Plastic pipe will post the strongest gains through 2018, continuing to take market share from competing materials in a range of markets.

Our latest market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Learn more

2014 Injection Molding Industry Report

GROWTH, OPPORTUNITY IN SIGHT FOR INJECTION MOLDERS IN 2014

In the wake of the economic turbulence earlier in this decade, molders today find themselves in much better shape. Molders are gaining a competitive advantage by investing in people, equipment and seeking inroads into new markets on a global scale.

Growth in the injection molding industry is going to be driven by low financing costs and a continued move to reshore some business.

Learn more

Shale Gas Market - Analysis of North American Region

This report highlights the impact of shale-based natural gas on the North American plastics market and features an in-depth analysis of production trends in the United States during 2013 and a forecast for 2014 and beyond.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events