Study links breast cancer risk to plastics employment

Mike Verespej

Published: November 19, 2012 6:00 am ET

Related to this story

Topics Materials, Public Policy, Suppliers, Sustainability, Automotive

WASHINGTON (Nov. 19, 5:10 p.m. ET) — Women who have worked for companies that make plastic injection molded parts for the automotive industry have a significantly higher risk of developing breast cancer than women who have not been exposed to that type of working environment, says a team of 12 researchers, whose work was funded by a number of Canadian groups, including Health Canada.

The report, published Nov. 19 in the Journal of Environmental Health, examined the occupational backgrounds of 1,006 women with breast cancer in the Ontario counties of Essex and Kent and compared them to a control group of 1,146 women in the region who did not have breast cancer.

The report said that the breast cancer study group of 1,006 women included 26 women who worked in the plastics automotive sector. Based upon that group of 26 women, the report said women in the plastics automotive sector were almost five times more likely than women in the control group to develop breast cancer prior to menopause.

“One year in plastics [auto] employment is estimated to increase the odds of breast cancer by 9 percent,” said the report, with the cases of “excess breast cancer” largely “limited to small automotive parts suppliers, which would include some plastics operations.”

The report does not contain information directly linking the exposure of those 26 women to any particular chemical or identify any specific chemicals to which those women had been exposed on their jobs. It simply notes that the women in those environments are exposed to a wide number of chemicals that have been suspected of causing cancer.

The American Chemistry Council, based in Washington, took exception to that analysis.

“It is concerning [to us] that the authors could be over-interpreting their results and unnecessarily alarming workers,” ACC said in a statement issued on Nov. 19, after it had the opportunity to review the full study. “This study included no data showing if there was actual chemical exposure, from what chemicals, at what levels, and over what period of time [exposure might have occurred] in any particular workplace.”

“Although this is a worthy and important area of research,” ACC said, “it is inappropriate to use such research as the basis for speculation about causes of patterns of cancer rates among occupations without any information of substance about whether there are actual exposures, to what actual substances, and how big [those exposures] might be.”

John Heinze, a scientist who works for a non-profit research association in Washington, concurred.

“This is ... basically a survey of the jobs held by over 1,000 Canadian women who had breast cancer compared to an equal number of women who didn’t have breast cancer,” Heinze told Plastics News.

“Since the case and controls were supposedly matched on other health and demographic variables, any difference in breast cancer incidence was assumed [by the researchers] to be due to occupational exposure to carcinogens and endocrine disruptors,” he said.

“However, occupational exposures were not measured, nor were questions asked specifically regarding occupational exposures,” said Heinze. “So the results ... only demonstrate statistical associations, not cause and effect. Without measurement of exposure levels, the statistical comparison of job histories between the two groups is not meaningful [and] the paper offers very little but speculation.”

The 12-person research team does not cite specific evidence or link the higher cancer rate among the automotive workers to any specific chemical exposure.

Instead, the report simply noted that a number of plastics used in plastic manufacturing have ‘identified’ as endocrine-disrupting chemicals and that there are a number of ways workers making plastic-injection molding parts can be exposed to ‘harmful’ chemicals.

“Many plastics have been found to release estrogenic chemicals [and] such additives as phthalates, and polybrominated diphenyl ethers have been identified as endocrine-disrupting chemicals,” said the report.

“Additionally, some of the monomers present in the manufacturing of polymers have been identified as mutagenic and/or carcinogenic [and] several monomers, additives, and related solvents, such as vinyl chloride, styrene, and acrylonitrile have been identified as mammary carcinogens in animal studies,” said the report. “Cumulative exposure to mixtures of various estrogenic chemicals may compound the effect.”

Similarly, the report did not delineate any specific ways the women in the study had been exposed to such chemicals. It simply pointed out how such workers could potentially be exposed to those chemicals.

“Emissions of vapors or mists from these hot [injection molding] processes can include plasticizers, ultraviolet-protectors, pigments, dyes, flame retardants, un-reacted resin components and decomposition products,” said the report. “Further exposure [to potentially harmful chemicals] can come from skin contact in handling and performing finishing tasks.”

Again, ACC disagreed and noted that there was no determination made by the researchers of any specific exposures.

“The study only demonstrates statistical associations. And, the study only examines occupations, not exposures to any agents or substances,” ACC said.

“Since there is no actual determination of exposures to such substances [and] no documentation of the presence in the workplace” of those substances, “there is no basis to conclude that exposures to such substances are any different for cases rather than controls,” ACC said.

The chemical industry association further pointed out that the American Cancer Society does not list chemical exposures among the well-established risk factors for breast cancer.

ACS instead lists a combination of lifestyle and genetic factors that include gender, aging, genetic risk factors, family history of breast cancer, personal history of breast cancer, race and ethnicity, dense breast tissue, menstrual periods, previous chest radiation, diethylstilbestrol exposure, having children, birth control, hormone therapy after menopause, breastfeeding, alcohol, being overweight or obese and physical activity.

ACC also pointed out that the National Cancer Institute has said that “research does not show a clear link between breast cancer risk and exposure to chemicals in the environment.”

The breast cancer study of the Canadian women was supported by the Department of Sociology, Anthropology and Criminology of the University of Windsor and the National Network on Environments and Women’s Health, which received funding from Health Canada through the Women’s Health Contribution Program.

Additional research partners included the Windsor Regional Cancer Centre of Windsor of Windsor Regional Hospital, and the Occupational Health Clinics for Ontario Workers with additional funding provided by the Ontario region of the Canadian Breast Cancer Foundation, the Breast Cancer Society of Canada, the Windsor Essex County Cancer Centre Foundation and the Green Shield Foundation.


Comments

Study links breast cancer risk to plastics employment

Mike Verespej

Published: November 19, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Major packaging merger includes plastics operations

January 26, 2015 12:24 pm ET

A merger of packaging companies MeadWestvaco Corp. and Rock-Tenn Inc. will create a new company with nearly $16 billion in annual sales.    More

Image

Auto industry on the hunt for new lightweight materials

January 26, 2015 4:03 pm ET

The auto industry is focusing on lightweighting, and this is igniting a race to find new materials that can meet ever-changing performance needs of...    More

Image

Material Insights: PP production issues, preparing for NPE

January 26, 2015 1:38 pm ET

Production problems in Texas add more complication for polypropylene, Entek has new equipment ready to show compounders at NPE and we take a look...    More

Image

Continental builds low-emission interior trim factory in China

January 26, 2015 12:33 pm ET

Benecke-Kaliko AG is making the largest investment in its history to build an environmentally friendly auto interior trim plant in China, prompted by ...    More

Image

J6 Polymers to buy Stepan unit

January 26, 2015 12:22 pm ET

NORTHFIELD, ILL. — Stepan Co. plans to sell its specialty polyurethanes systems business to J6 Polymers LLC in a cash deal.    More

Market Reports

Plastics in Automotive: Innovation & Emerging Trends

This special report newly released by PN and sponsored by The Conair Group examines current trends in the use of plastics in automotive, materials innovations and the changing landscape. It includes a review of legislative/regulatory activity impacting vehicle development and lightweighting, market opportunities & challenges for mold and toolmakers, innovative design strategies being implemented by major OEMs and suppliers, as well as a review of key indicators in Canada, Mexico, Brazil and China.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molding Market Analysis & Processor Rankings

Plastics News BUNDLED package contains our in-depth Market Analysis of the Injection Molding segment. You will gain keen insight on current trends and our economic outlook.

As a BONUS this includes PN's updated 2014 database of North American Injection Molders RANKED by sales volume. Sort, merge, mail & prospect by end market, materials processed, region, # of plants and more.

Learn more

Upcoming Plastics News Events

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events