Study links breast cancer risk to plastics employment

Mike Verespej

Published: November 19, 2012 6:00 am ET

Related to this story

Topics Automotive, Sustainability, Public Policy, Materials, Suppliers

WASHINGTON (Nov. 19, 5:10 p.m. ET) — Women who have worked for companies that make plastic injection molded parts for the automotive industry have a significantly higher risk of developing breast cancer than women who have not been exposed to that type of working environment, says a team of 12 researchers, whose work was funded by a number of Canadian groups, including Health Canada.

The report, published Nov. 19 in the Journal of Environmental Health, examined the occupational backgrounds of 1,006 women with breast cancer in the Ontario counties of Essex and Kent and compared them to a control group of 1,146 women in the region who did not have breast cancer.

The report said that the breast cancer study group of 1,006 women included 26 women who worked in the plastics automotive sector. Based upon that group of 26 women, the report said women in the plastics automotive sector were almost five times more likely than women in the control group to develop breast cancer prior to menopause.

“One year in plastics [auto] employment is estimated to increase the odds of breast cancer by 9 percent,” said the report, with the cases of “excess breast cancer” largely “limited to small automotive parts suppliers, which would include some plastics operations.”

The report does not contain information directly linking the exposure of those 26 women to any particular chemical or identify any specific chemicals to which those women had been exposed on their jobs. It simply notes that the women in those environments are exposed to a wide number of chemicals that have been suspected of causing cancer.

The American Chemistry Council, based in Washington, took exception to that analysis.

“It is concerning [to us] that the authors could be over-interpreting their results and unnecessarily alarming workers,” ACC said in a statement issued on Nov. 19, after it had the opportunity to review the full study. “This study included no data showing if there was actual chemical exposure, from what chemicals, at what levels, and over what period of time [exposure might have occurred] in any particular workplace.”

“Although this is a worthy and important area of research,” ACC said, “it is inappropriate to use such research as the basis for speculation about causes of patterns of cancer rates among occupations without any information of substance about whether there are actual exposures, to what actual substances, and how big [those exposures] might be.”

John Heinze, a scientist who works for a non-profit research association in Washington, concurred.

“This is ... basically a survey of the jobs held by over 1,000 Canadian women who had breast cancer compared to an equal number of women who didn’t have breast cancer,” Heinze told Plastics News.

“Since the case and controls were supposedly matched on other health and demographic variables, any difference in breast cancer incidence was assumed [by the researchers] to be due to occupational exposure to carcinogens and endocrine disruptors,” he said.

“However, occupational exposures were not measured, nor were questions asked specifically regarding occupational exposures,” said Heinze. “So the results ... only demonstrate statistical associations, not cause and effect. Without measurement of exposure levels, the statistical comparison of job histories between the two groups is not meaningful [and] the paper offers very little but speculation.”

The 12-person research team does not cite specific evidence or link the higher cancer rate among the automotive workers to any specific chemical exposure.

Instead, the report simply noted that a number of plastics used in plastic manufacturing have ‘identified’ as endocrine-disrupting chemicals and that there are a number of ways workers making plastic-injection molding parts can be exposed to ‘harmful’ chemicals.

“Many plastics have been found to release estrogenic chemicals [and] such additives as phthalates, and polybrominated diphenyl ethers have been identified as endocrine-disrupting chemicals,” said the report.

“Additionally, some of the monomers present in the manufacturing of polymers have been identified as mutagenic and/or carcinogenic [and] several monomers, additives, and related solvents, such as vinyl chloride, styrene, and acrylonitrile have been identified as mammary carcinogens in animal studies,” said the report. “Cumulative exposure to mixtures of various estrogenic chemicals may compound the effect.”

Similarly, the report did not delineate any specific ways the women in the study had been exposed to such chemicals. It simply pointed out how such workers could potentially be exposed to those chemicals.

“Emissions of vapors or mists from these hot [injection molding] processes can include plasticizers, ultraviolet-protectors, pigments, dyes, flame retardants, un-reacted resin components and decomposition products,” said the report. “Further exposure [to potentially harmful chemicals] can come from skin contact in handling and performing finishing tasks.”

Again, ACC disagreed and noted that there was no determination made by the researchers of any specific exposures.

“The study only demonstrates statistical associations. And, the study only examines occupations, not exposures to any agents or substances,” ACC said.

“Since there is no actual determination of exposures to such substances [and] no documentation of the presence in the workplace” of those substances, “there is no basis to conclude that exposures to such substances are any different for cases rather than controls,” ACC said.

The chemical industry association further pointed out that the American Cancer Society does not list chemical exposures among the well-established risk factors for breast cancer.

ACS instead lists a combination of lifestyle and genetic factors that include gender, aging, genetic risk factors, family history of breast cancer, personal history of breast cancer, race and ethnicity, dense breast tissue, menstrual periods, previous chest radiation, diethylstilbestrol exposure, having children, birth control, hormone therapy after menopause, breastfeeding, alcohol, being overweight or obese and physical activity.

ACC also pointed out that the National Cancer Institute has said that “research does not show a clear link between breast cancer risk and exposure to chemicals in the environment.”

The breast cancer study of the Canadian women was supported by the Department of Sociology, Anthropology and Criminology of the University of Windsor and the National Network on Environments and Women’s Health, which received funding from Health Canada through the Women’s Health Contribution Program.

Additional research partners included the Windsor Regional Cancer Centre of Windsor of Windsor Regional Hospital, and the Occupational Health Clinics for Ontario Workers with additional funding provided by the Ontario region of the Canadian Breast Cancer Foundation, the Breast Cancer Society of Canada, the Windsor Essex County Cancer Centre Foundation and the Green Shield Foundation.


Comments

Study links breast cancer risk to plastics employment

Mike Verespej

Published: November 19, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Chicago City Council committee approves plastic bag ban

April 24, 2014 7:11 pm ET

Chicago is poised to become the next major U.S. city to enact a ban on single-use plastic bags after a City Council committee vote on April 24.    More

Image

Plastics News Now: Simpsons go Lego, Pharrell Williams gets into recycled plastic

April 24, 2014 8:45 am ET

Lego has teamed up with "The Simpsons" for a special episode, we see the trends at the International Home + Housewares Show and musician Pharrell...    More

Image

PolyOne says new Shanghai center will ease collaboration across segments

April 24, 2014 2:34 pm ET

PolyOne Specialty Engineered Materials is opening an innovation Center in Shanghai's Jinqiao development zone that will serve as its new Asia Pacific ...    More

Injection molder Precision Plastics adding space, presses in Indiana

April 24, 2014 2:54 pm ET

Custom injection molder Precision Plastics Inc. is expanding its Columbia City, Ind., operation.    More

Interactive map aids polypropylene recycling efforts

April 24, 2014 1:34 pm ET

Folks interested in recycling polypropylene products now have a new tool at their disposal.    More

Market Reports

Market Data Book - Rankings & Lists

A one-stop download of Plastic News' exclusive annual lists and processor rankings containing essential data including sales, employees, end markets, materials and more.
EXCLUSIVE EXCEL FEATURE: full mailing address details for available plant locations.

Learn more

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report provides analysis and discussions of economic and political conditions, market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as strategies being implemented by thermoformed packaging companies. In addition, there are reviews of 25 leading thermoformers in the packaging segment, assessing their growth initiatives and performance metrics over 10 years.

Learn more

Mold Making and Tooling Review and Outlook 2014 North America

This report provides in-depth analysis of the mold and toolmaking market for North America, including discussions of trends, opportunities, threats, the latest developments in production and labor and equipment trends impacting moldmakers.

Learn more

Upcoming Plastics News Events

May 6, 2014 - May 8, 2014Plastics in Medical Devices 2014

May 12, 2014 - May 12, 2014Plastics News Brazil Pharma Summit

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

February 3, 2015 - February 7, 2015Plastics News Executive Forum 2015

More Events