Center gets funds for carbon dioxide-based polymers

Anthony Clark

Published: November 19, 2012 6:00 am ET
Updated: January 3, 2013 6:31 am ET

Related to this story

Topics Sustainability, Materials, Suppliers

AACHEN, GERMANY (Nov. 19, 12:55 p.m. ET) – A second round of funding for the CAT Catalytic Centre in Aachen will enable the facility to further its work into the to use carbon dioxide as an alternative building block for plastics. It will also help the facility develop ways to use the spare electricity from wind turbines to produce hydrogen using electrolysis.

The projects, run in conjunction with Bayer MaterialScience, have attracted funding of 20 million euros and have proved a “magnet for top researchers”, according to Professor Walter Leitner, chair of technical chemistry and petrochemistry at RWTH and scientific director of the CAT Catalytic Centre.

Christoph Gürtler, who heads the Bayer MaterialScience catalysis program and also serves as director of the Aachen facility, added: “Without the CAT Catalytic Centre we most certainly would not have progressed so quickly in developing these projects.”

One of the objectives is to use CO2 as a source of carbon for manufacturing polyols, reducing consumption of petroleum-based propylene oxide, the conventional raw material. The CO2-based polyols will initially serve as a building block for flexible polyurethane foam. However, the range of applications will soon be expanded to include coatings and thermoplastic polyurethanes, Gürtler explained.

The CO2RRECT project (CO2-Reaction using Regenerative Energies and Catalytic Technologies) is also making good progress. One goal of this research is to use the excess electricity from wind turbines to produce hydrogen by way of electrolysis. The hydrogen will then be combined with waste CO2 from power plants to obtain chemical intermediates, such as carbon monoxide and formic acid, which can be used in turn to manufacture not only polyurethanes but also the high-performance polycarbonates.

“To react the CO2, Bayer has developed a catalyst that is a significant improvement over the state of the art,” said Gürtler. Furthermore, a chemical reactor for CO2-reforming, also developed by Bayer, promises significant cost advantages over conventional plants. This reformer is currently under construction as a demonstration facility at the INVITE research centre, run jointly in Leverkusen by Bayer Technology Services and Dortmund Technical University.

The new reformer is scheduled to go into operation there in spring 2013.

“Our partners have also developed a water electrolyser that can be started up and shut down in seconds,” explained Gürtler. As a result, the current fluctuations that are unavoidable when using regeneratively produced electricity can be reliably managed, he added.

A demonstration system will be built in the near future.


Comments

Center gets funds for carbon dioxide-based polymers

Anthony Clark

Published: November 19, 2012 6:00 am ET
Updated: January 3, 2013 6:31 am ET

Post Your Comments


Back to story


More stories

Image

'Thermoforming has nearly limitless possibilities'

April 18, 2014 12:54 pm ET

Julie McAlindon of PolyOne Corp. speaks about the future of thermoforming and the integration of Spartech Corp.    More

Image

Ascend targets nylon for auto applications, opening propylene monomer unit in Texas

April 18, 2014 10:57 am ET

Materials firm Ascend Performance Materials Inc. is in full operation at its new nylon 6/6 compounding line in Florida and will break ground by the...    More

Dutch company launching $100 million PP, PE recycling plant

April 18, 2014 10:42 am ET

Quality Circular Polymers is building a new plastics recycling operation in Geleen, the Netherlands' Chemelot industrial chemical site, with a...    More

Lumena suspends trading, delays report amid claims of 'misrepresenting' financials

April 18, 2014 10:19 am ET

China Lumena New Materials Corp., which says it has the world's largest manufacturing capacity for polyphenylene sulfide resin, has suspended its...    More

PolyQuest spins off FiberQuest unit

April 18, 2014 10:14 am ET

PolyQuest Inc. has spun off its FiberQuest unit — which distributes polyester staple fibers and cotton — as a separate company.    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report provides analysis and discussions of economic and political conditions, market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as strategies being implemented by thermoformed packaging companies. In addition, there are reviews of 25 leading thermoformers in the packaging segment, assessing their growth initiatives and performance metrics over 10 years.

Learn more

Automotive Market Review and Outlook 2014 The Americas

This 75-page report features in-depth analysis of the automotive industry for the Americas. It includes discussions of market trends, legislative/regulatory activity impacting production and threats as well as design strategies being implemented by the major automakers. Detailed charts and data tables outline North American automotive production over the last five years.

Learn more

Plastics Building & Construction Market Review and Outlook 2014 with MS Excel chart data

This report provides in-depth analysis of the plastic building and construction market for North America, including discussions of trends, opportunities, threats and the latest developments in construction trends that impact plastics processors.

Learn more

Upcoming Plastics News Events

May 6, 2014 - May 8, 2014Plastics in Medical Devices 2014

May 12, 2014 - May 12, 2014Plastics News Brazil Pharma Summit

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

February 3, 2015 - February 7, 2015Plastics News Executive Forum 2015

More Events