Center gets funds for carbon dioxide-based polymers

Anthony Clark

Published: November 19, 2012 6:00 am ET
Updated: January 3, 2013 6:31 am ET

Related to this story

Topics Materials, Suppliers, Sustainability

AACHEN, GERMANY (Nov. 19, 12:55 p.m. ET) – A second round of funding for the CAT Catalytic Centre in Aachen will enable the facility to further its work into the to use carbon dioxide as an alternative building block for plastics. It will also help the facility develop ways to use the spare electricity from wind turbines to produce hydrogen using electrolysis.

The projects, run in conjunction with Bayer MaterialScience, have attracted funding of 20 million euros and have proved a “magnet for top researchers”, according to Professor Walter Leitner, chair of technical chemistry and petrochemistry at RWTH and scientific director of the CAT Catalytic Centre.

Christoph Gürtler, who heads the Bayer MaterialScience catalysis program and also serves as director of the Aachen facility, added: “Without the CAT Catalytic Centre we most certainly would not have progressed so quickly in developing these projects.”

One of the objectives is to use CO2 as a source of carbon for manufacturing polyols, reducing consumption of petroleum-based propylene oxide, the conventional raw material. The CO2-based polyols will initially serve as a building block for flexible polyurethane foam. However, the range of applications will soon be expanded to include coatings and thermoplastic polyurethanes, Gürtler explained.

The CO2RRECT project (CO2-Reaction using Regenerative Energies and Catalytic Technologies) is also making good progress. One goal of this research is to use the excess electricity from wind turbines to produce hydrogen by way of electrolysis. The hydrogen will then be combined with waste CO2 from power plants to obtain chemical intermediates, such as carbon monoxide and formic acid, which can be used in turn to manufacture not only polyurethanes but also the high-performance polycarbonates.

“To react the CO2, Bayer has developed a catalyst that is a significant improvement over the state of the art,” said Gürtler. Furthermore, a chemical reactor for CO2-reforming, also developed by Bayer, promises significant cost advantages over conventional plants. This reformer is currently under construction as a demonstration facility at the INVITE research centre, run jointly in Leverkusen by Bayer Technology Services and Dortmund Technical University.

The new reformer is scheduled to go into operation there in spring 2013.

“Our partners have also developed a water electrolyser that can be started up and shut down in seconds,” explained Gürtler. As a result, the current fluctuations that are unavoidable when using regeneratively produced electricity can be reliably managed, he added.

A demonstration system will be built in the near future.


Comments

Center gets funds for carbon dioxide-based polymers

Anthony Clark

Published: November 19, 2012 6:00 am ET
Updated: January 3, 2013 6:31 am ET

Post Your Comments


Back to story


More stories

Image

Arkema adds Bostik to high performance materials business unit

March 6, 2015 9:24 am ET

Arkema SA has finalized the acquisition of Bostik SA from Total SA, bringing what it says is the world's No. 3 adhesives provider into its portfolio.    More

Image

'Listen to the Science' ads a start, but consumers still need education

March 5, 2015 11:36 am ET

Since joining Plastics News — and therefore learning more than the average consumer about the business and science of plastics — there...    More

Image

Huntsman closing four pigment plants

March 5, 2015 3:36 pm ET

Huntsman Corp. is closing four plants — three in the U.S. and one in Germany — that make pigments for plastics and other markets.    More

Image

LiquiForm looks to fundamentally change blow molding process for bottles

March 5, 2015 12:13 pm ET

Those in the know are lifting the veil, just a bit, on fledgling technology being developed that would fundamentally change the way plastic bottles...    More

Image

Plastics News Now: Plastic raises the roof

March 5, 2015 8:44 am ET

Toyota's hydrogen fuel cell vehicle gets an assist from carbon fiber, slate roof shingles get the plastic treatment and West Coast port delays had mac...    More

Market Reports

Flexible Packaging Trends in North America

North America represents about 30 percent of the global consumption of flexible packaging. Annual growth in this region is forecast at 4 percent during the next 5 years.

For more insight on growth opportunities, drivers of growth and the outlook for 2015, download this report.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 billion plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our analysts provide insight on business trends, foreign investment, top end markets and plastics processing activity. The report also provides important data on exports, production, employment and value of plastics products manufactured.

Learn more

Upcoming Plastics News Events

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events