Dolphin process on display in truck

David Vink

Published: November 21, 2012 6:00 am ET

Italy’s Sole SpA uses the Dolphin process for the cockpit of the Mercedes-Benz Acros truck. (Daimler AG photo)

Related to this story

Topics Automotive, Materials, Suppliers

ODERZO, ITALY (Nov. 14) — In June 2011, Daimler AG’s Mercedes-Benz business launched the latest version of its Actros truck, which it said was “developed from scratch,” with a new interior design including a soft-touch cockpit.

The cockpit is injection molded using the Dolphin process, which combines foamed-in-place technology with two-component hard/soft molding. It is produced in a plant in W"rth, Germany, located on Daimler premises but operated by Italian automotive molding company Sole SpA.

Sole makes cockpit parts using Engel Coinmelt decompression technology. Dolphin was developed by Engel with Swiss mold maker Georg Kaufmann and materials suppliers BASF AG and P Group (now So.F.Ter) in 2007, based on the use of BASF’s Ultradur polybutylene terephthalate for the primary rigid component and thermoplastic elastomer from P Group.

But Sole business-development director Giuseppe Maiarellei told European Plastics News at the company’s headquarters in Oderzo, where the cockpit was displayed in its showroom, that the material solution has now changed from the original concept.

So.F.Ter supplies Pibiflex 3567 S (a TPE block copolymer from crystalline PBT and amorphous polyether glycol), and the rigid component material, a mineral-filled PC/ABS blend called Reblend.

The Dolphin process was first evaluated in 2007 by automotive supplier IAC for part of a Scania truck dashboard, and the process was shown by Engel and its Dolphin partners at K2007 in cooperation with Johnson Controls Inc. But the Actros cockpit is believed to be the first Dolphin application in serial production.

So.F.Ter said the Actros dashboard is made up of four panels extending across its entire width, including a lower part with foldaway drawers.

As with the original concept, the soft TPE secondary component is foamed using Trexel’s MuCell microcellular foaming process.

Dolphin consortium partners are talking of the potential to also physically foam the rigid component to save more weight than already achieved with the TPE surface. There should also be the possibility of using Pibiflex TPE for airbag cladding, where it maintains breakthrough performance over a wide range of temperatures, according to So.F.Ter.

Mathias Dettinger of Daimler’s interior and system evaluation department in Stuttgart said trucks and cars have been shifting toward very similar interior designs. High-quality appearance and feel of cockpits are now equally important in both sectors and are appreciated by truck drivers, who use their cabins around-the-clock as working, living and sleeping spaces.

The preceding design of the Actros 2 truck in 2002 considerably narrowed the design gap with cars; the 2011 design even more so, and this helped the new Actros win the Truck of the Year 2012 award. Mercedes-Benz offers the truck with a cockpit in two widths and three equipment lines.

Dettinger compared the cockpit made with the Dolphin process with those made with conventional back-foamed foil and cladding with foamed foils. He noted that foil thermoforming and cladding processes can cause differences in surface appearance and require wider part tolerances, leading to uneven gap dimensions.

Dettinger concluded that the other processes “are not forward-looking technologies.”

He said Dolphin, on the other hand, can achieve closer tolerances and should cost less over the product life cycle, despite “very complex and expensive tooling.”

Even if parts are designed with many reinforcement ribs in the rigid primary component, any consequent sink marks on the top surface are hidden by the foamed TPE. Integrated clips and snap fittings can be produced without sliders and designed in the same full thickness as the rest of the part, instead of being joined by a narrow section as would be needed with conventional injection molded polypropylene parts.

That aspect was well-illustrated during an Engel Symposium open house in Austria in June, where the Dolphin process was demonstrated live.

 When the new Actros application was announced in December 2011, other series applications for Dolphin were said to be under discussion. At the Engel Symposium in June, a demonstration example was displayed of a Hyundai Mobis car dashboard made with the Dolphin process, showing its applicability in cars as well as trucks.


Comments

Dolphin process on display in truck

David Vink

Published: November 21, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Sabic: Rapid demand growth led to Ultem shortage

December 18, 2014 12:06 pm ET

Sabic Innovative Plastics has been increasing production capacity for its Ultem polyetherimide but it still got caught short by increasing demand for ...    More

Auto supplier M-Tek relocating headquarters

December 18, 2014 3:37 pm ET

M-Tek Inc., a subsidiary of Japanese automotive supplier Kasai Kogyo Co. Ltd., will build a new North American corporate headquarters in Murfreesboro,...    More

Image

Auto, medical, packaging all lead to solid sales for compounding extruders

December 18, 2014 6:00 am ET

Compounding extruder sales tend to be cyclical, but machinery makers report another solid year — thanks to automotive, medical, food packaging...    More

Image

Indian auto parts maker set to buy assets in Germany, Mexico

December 18, 2014 10:35 am ET

Indian auto parts maker Samvardhana Motherson Gropup is buying the assets of insolvent German plastics car parts producer Scherer & Trier (S&T).    More

McCann expanding in Ohio

December 17, 2014 11:59 am ET

Compounding firm McCann Plastics will spend $1.2 million on an expansion project that will create 15 new jobs at its plant in Green, Ohio.    More

Market Reports

Flexible Packaging Trends in North America

Our latest RESEARCH report examines trends in FLEXIBLE PACKAGING impacting the North American market including a review of economic conditions, key drivers of growth, materials pricing, M&A activity, sustainability challenges and the outlook for 2015.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 billion plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our analysts provide insight on business trends, foreign investment, top end markets and plastics processing activity. The report also provides important data on exports, production, employment and value of plastics products manufactured.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

October 27, 2015 - October 29, 2015Plastics Financial Summit - New York - 2015

More Events