Mexichem withdraws from Pemex vinyl chloride joint venture

By Stephen Downer
Correspondent

Published: November 26, 2012 6:00 am ET

Related to this story

Topics Materials, Mergers & Acquisitions, Suppliers

MEXICO CITY (Nov. 26, 11:40 a.m. ET) — Mexico’s plastics industry association, Anipac, has reacted with dismay to the news that Mexichem has withdrawn from a proposed $556 million vinyl chloride monomer-producing joint venture with state oil company Petróleos Mexicanos (Pemex).

“Without a doubt this is very unfortunate news for the country,” José Anselmo del Cueto Gracia, Anipac’s president told Plastics News by email Nov. 26. He put the total investment at $1 billion and added that the money “that could have been invested in Mexico will go elsewhere.”

Del Cueto lamented the loss of many jobs that would have been created had the project gone ahead, adding: “We hope the new administration (of President Enrique Peña Nieto) will give this project the priority it deserves.”

Mexichem SAB de CV, Latin America’s largest manufacturer of PVC pipe, vinyl resins and compounds, withdrew from the venture November 22 after expressing its exasperation at Pemex’s failure to finalize the deal.

In a filing with the Mexican Stock Exchange, Mexichem, of Tlalnepantla, Mexico, blamed the “constant delays by Pemex” in backing the undertaking, approved by Mexico’s federal antitrust authority (Comisión Federal de Competencia) in October 2011.

It would instead “give priority” to what it described as “its vertical integration plan outside Mexico,” it said. In other words it would invest the money set aside for the project with Pemex in a country other than Mexico.

“Mexichem,” it added, “will continue with its strategy of solid and profitable growth, despite not being able to count on this public-private sector partnership which would modernize our country’s (Mexico’s) petrochemical industry and allow for true growth in a sector which plays such an essential role in Mexico’s economy.”

A Pemex spokesman had no comment on Nov. 23.

But Del Cueto said it was “strategically important” for Mexichem, as Mexico’s main producer of PVC resins, to reduce its costs and increase its production capacity to enable it to offer raw materials to processors at accessible prices.

“From the point of view of the processor, this announcement complicates even more the panorama for obtaining raw materials at competitive prices, which could have meant that the industry no longer lost market share to imported finished products.”

He said that imports of end products made from PVC had had a detrimental effect on sectors such as construction in recent years because competitively priced raw materials were in short supply.

Juan José Suárez Coppel, Pemex’s managing director, told reporters as recently as late September that the proposed joint venture with Mexichem was “very important.” He hoped Pemex’s board of directors would approve it soon.

In July 2011, Mexican consultant Eduardo de la Tijera Coeto said that, if the deal went ahead, “Mexichem will become a very solid company while Pemex’s VCM business, which has been very weak, will become stronger and more profitable thanks to the influence of Mexichem. My impression is that it is a win-win situation for both Mexichem and Pemex.”

“The significance of this,” he added, “is that the vinyl chain in Mexico will be fully integrated. It will very much resemble the way the U.S. vinyl industry is organized.”

Another consultant, Rina Quijada, CEO of market intelligence company IntelliChem Inc, of Houston, Texas, said in a separate interview last year that Pemex used only 50 percent of the installed production capacity of 400,000 tons per year at its VCM plant in Pajaritos, Veracruz state.

But De la Tijera, managing director of Grupo Texne, of Mexico City, pointed out that it was not because of low demand “but because of production limitations. The significance of the (proposed) new deal is that additional capital will be invested to make Pajaritos work.

“That means investment in modernizing some of the facilities, such as some of the furnaces, and improving inter-connection between different units. I’m sure some new engineering design will be needed.”

Mexichem’s withdrawal from the project came nine days before the end of the six-year administration of President Felipe Calderón.

Mexichem executives may have thought there was no guarantee the new government, headed by Peña Nieto, of the opposition PRI party, would approve the project. And, even if the new administration favored a deal, final approval was likely to have taken time.


Comments

Mexichem withdraws from Pemex vinyl chloride joint venture

By Stephen Downer
Correspondent

Published: November 26, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

DuPont investing $100 million for more ethylene copolymer capacity

September 16, 2014 1:51 pm ET

Increased packaging demand is leading materials giant DuPont Co. to spend more than $100 million to increase capacity for ethylene copolymers at its...    More

Image

Flexibility for complexity key for Brampton

September 16, 2014 11:26 am ET

Blown film machinery maker Brampton Engineering Inc. is well positioned to meet growing demand for complex film structures, highly customized...    More

Image

Latvian plastics recycler Nordic Plast boosts capacity

September 16, 2014 10:15 am ET

Latvian plastics waste recycler Nordic Plast Ltd. has invested more than 2.5 million euros ($3.2 million) to expand capacity and modernize production ...    More

Image

US plastics machinery market still gaining strength in second quarter

September 15, 2014 5:01 pm ET

U.S. plastics machinery shipments in the second quarter continued to outperform activity in 2013, according to data from Society of the Plastics...    More

Image

ZF finalizes deal to buy TRW, creating another global auto supply giant

September 15, 2014 1:09 pm ET

TRW Automotive Holdings, in a supply chain megadeal that has been in the works since mid-July, said Sept. 15 it has agreed to be acquired by German su...    More

Market Reports

Shale Gas Market - Analysis of North American Region

This report highlights the impact of shale-based natural gas on the North American plastics market and features an in-depth analysis of production trends in the United States during 2013 and a forecast for 2014 and beyond.

Learn more

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report analyzes economic and market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as growth strategies being implemented by thermoformed packaging companies.

Learn more

Pipe, Profile & Tubing Extrusion in North America 2014

U.S. demand for extruded plastics is expected to grow by 3 percent in 2014, with PVC remaining the largest segment.

Plastic pipe will post the strongest gains through 2018, continuing to take market share from competing materials in a range of markets.

Our latest market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events