Mexichem withdraws from Pemex vinyl chloride joint venture

By Stephen Downer
Correspondent

Published: November 26, 2012 6:00 am ET

Related to this story

Topics Materials, Mergers & Acquisitions, Suppliers

MEXICO CITY (Nov. 26, 11:40 a.m. ET) — Mexico’s plastics industry association, Anipac, has reacted with dismay to the news that Mexichem has withdrawn from a proposed $556 million vinyl chloride monomer-producing joint venture with state oil company Petróleos Mexicanos (Pemex).

“Without a doubt this is very unfortunate news for the country,” José Anselmo del Cueto Gracia, Anipac’s president told Plastics News by email Nov. 26. He put the total investment at $1 billion and added that the money “that could have been invested in Mexico will go elsewhere.”

Del Cueto lamented the loss of many jobs that would have been created had the project gone ahead, adding: “We hope the new administration (of President Enrique Peña Nieto) will give this project the priority it deserves.”

Mexichem SAB de CV, Latin America’s largest manufacturer of PVC pipe, vinyl resins and compounds, withdrew from the venture November 22 after expressing its exasperation at Pemex’s failure to finalize the deal.

In a filing with the Mexican Stock Exchange, Mexichem, of Tlalnepantla, Mexico, blamed the “constant delays by Pemex” in backing the undertaking, approved by Mexico’s federal antitrust authority (Comisión Federal de Competencia) in October 2011.

It would instead “give priority” to what it described as “its vertical integration plan outside Mexico,” it said. In other words it would invest the money set aside for the project with Pemex in a country other than Mexico.

“Mexichem,” it added, “will continue with its strategy of solid and profitable growth, despite not being able to count on this public-private sector partnership which would modernize our country’s (Mexico’s) petrochemical industry and allow for true growth in a sector which plays such an essential role in Mexico’s economy.”

A Pemex spokesman had no comment on Nov. 23.

But Del Cueto said it was “strategically important” for Mexichem, as Mexico’s main producer of PVC resins, to reduce its costs and increase its production capacity to enable it to offer raw materials to processors at accessible prices.

“From the point of view of the processor, this announcement complicates even more the panorama for obtaining raw materials at competitive prices, which could have meant that the industry no longer lost market share to imported finished products.”

He said that imports of end products made from PVC had had a detrimental effect on sectors such as construction in recent years because competitively priced raw materials were in short supply.

Juan José Suárez Coppel, Pemex’s managing director, told reporters as recently as late September that the proposed joint venture with Mexichem was “very important.” He hoped Pemex’s board of directors would approve it soon.

In July 2011, Mexican consultant Eduardo de la Tijera Coeto said that, if the deal went ahead, “Mexichem will become a very solid company while Pemex’s VCM business, which has been very weak, will become stronger and more profitable thanks to the influence of Mexichem. My impression is that it is a win-win situation for both Mexichem and Pemex.”

“The significance of this,” he added, “is that the vinyl chain in Mexico will be fully integrated. It will very much resemble the way the U.S. vinyl industry is organized.”

Another consultant, Rina Quijada, CEO of market intelligence company IntelliChem Inc, of Houston, Texas, said in a separate interview last year that Pemex used only 50 percent of the installed production capacity of 400,000 tons per year at its VCM plant in Pajaritos, Veracruz state.

But De la Tijera, managing director of Grupo Texne, of Mexico City, pointed out that it was not because of low demand “but because of production limitations. The significance of the (proposed) new deal is that additional capital will be invested to make Pajaritos work.

“That means investment in modernizing some of the facilities, such as some of the furnaces, and improving inter-connection between different units. I’m sure some new engineering design will be needed.”

Mexichem’s withdrawal from the project came nine days before the end of the six-year administration of President Felipe Calderón.

Mexichem executives may have thought there was no guarantee the new government, headed by Peña Nieto, of the opposition PRI party, would approve the project. And, even if the new administration favored a deal, final approval was likely to have taken time.


Comments

Mexichem withdraws from Pemex vinyl chloride joint venture

By Stephen Downer
Correspondent

Published: November 26, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Audacious vandal stuns Taipei Plas

September 29, 2014 4:59 pm ET

Melodrama erupted at the traditionally tranquil Taipei Plas trade show on Sept. 28 when a mysterious intruder flung red paint at the Baumüller...    More

Image

Asahi Kasei breaks ground on Alabama compounding plant

September 29, 2014 5:39 pm ET

Asahi Kasei Plastics North America will be able to solve two problems at once with a new compounding plant in Athens, Ala.    More

Image

Shini pushes into western China

September 29, 2014 4:28 pm ET

Despite intellectual-property brigands, Taiwan's Shini Plastics Technologies Inc. is zestfully pursuing the enormous Chinese market for plastics...    More

Image

DuPont shifting Teflon production in China

September 29, 2014 2:35 pm ET

DuPont Co. will spend more than $15 million to improve its fluoropolymer product offerings in China.    More

Image

Sale of PVC maker Oltchim still in limbo

September 29, 2014 10:25 am ET

Fresh attempts to privatize insolvent Romanian PVC producer Oltchim SA have met with new obstacles as the European Union questioned the Romanian gover...    More

Market Reports

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 million dollar plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our industry analysis highlights macro industry trends and micro trends faced by companies that do business in Mexico. The report also provides key industry statistics and forecasts to anticipate future industry expansion.

Learn more

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Injection Molders Market Report & Ranking 2014

This special package contains our 132-page 2014 Market Report on the Injection Molding segment and our exclusive 2014 RANKINGS database of 500+ Injection Molders for a discounted package price.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events