Demand growing for home use of 3D printing

By Michael Lauzon
Correspondent

Published: November 26, 2012 6:00 am ET

Related to this story

Topics Machinery, Design

MONTREAL (Nov. 26, 11:35 a.m. ET) — Home use of 3D printing systems will be the fastest growing market for the technologies, according to a speaker at Expoplast12.

“North American demand is about $1.7 billion in products and services,” said Vincent Laithier, sales manager of Axis Prototypes, a 3D printing and prototype producer based in Saint-Leonard, Quebec. “The market will double in size in the next four years, primarily from home printers.”

Laithier was addressing delegates at the Innovation Briefs seminars held at Expoplast, held Nov. 14-15 in Montreal.  Laithier was citing statistics generated by Wohlers Associates Inc. of Fort Collins, Colo.

Home use will include consumers making replacement electronic parts and appliance parts from CAD drawings downloaded from Websites. In the future consumers could elect to make their own toys using 3D printing. A novel use will be creating 3D family portraits from 2D photographs, he predicted.

Laithier said 3D printing began in 1986 when the first stereolithography machines hit the market. More technologies were developed and in 2003 direct metal laser sintering became available. Axis added metal laser sintering to its capabilities recently and at Expoplast it was featuring in its booth stainless steel parts made that way.

Laithier said the biggest current market for 3D printing is consumer products, representing 24 percent of demand. That sector is followed by motor vehicles (19 percent), medical/dental (13 percent), business machines (10 percent), aerospace (8 percent), government/military (7 percent), architecture (4 percent), academia (4 percent) and other, including home use, (6 percent).

Rapid manufacturing is a fast-growing area, opined Laithier. Aircraft manufacturer Boeing Co., for example, uses selective laser sintering for short runs of parts.

Advantages of 3D printing include no tooling costs, no inventory costs, shorter time to market, ability to innovate during development and make major changes to the critical path of part development.

Toy producer Mega Bloks of Montreal uses 3D printing to create prototypes which it can show to retail buyers to help them decide to pre-book orders before the actual toys are molded.

Laithier said one of the major recent market shifts occurred in spring 2012, when Stratasys Inc. of Eden Prairie, Minn., merged with Objet Ltd. of Rehovot, Israel.

Axis has more than 15 years of experience in 3D printing.


Comments

Demand growing for home use of 3D printing

By Michael Lauzon
Correspondent

Published: November 26, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Flexibility for complexity key for Brampton

September 16, 2014 11:26 am ET

Blown film machinery maker Brampton Engineering Inc. is well positioned to meet growing demand for complex film structures, highly customized...    More

Image

US plastics machinery market still gaining strength in second quarter

September 15, 2014 5:01 pm ET

U.S. plastics machinery shipments in the second quarter continued to outperform activity in 2013, according to data from Society of the Plastics...    More

Image

ATS goes global with acquisition of M+W Process Automation

September 10, 2014 2:49 pm ET

ATS Automation Tooling Systems Inc., a maker of factory automation systems in Cambridge, Ontario, has agreed to buy a German company M+W Process...    More

Image

Orenda says new pulverizer improves efficiency through cooling

September 10, 2014 1:41 pm ET

Orenda Automation Technologies Inc. will unveil a new pulverizer with new cooling technology at the Rotoplas conference for rotational molders, Oct....    More

Image

Plastics barely mentioned in iPhone 6 introduction

September 9, 2014 4:26 pm ET

Bigger than its predecessors, the 4.7-inch iPhone 6 and the 5.5-inch iPhone 6 Plus will pack more pixels and power into a thinner design that has a gl...    More

Market Reports

Shale Gas Market - Analysis of North American Region

This report highlights the impact of shale-based natural gas on the North American plastics market and features an in-depth analysis of production trends in the United States during 2013 and a forecast for 2014 and beyond.

Learn more

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report analyzes economic and market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as growth strategies being implemented by thermoformed packaging companies.

Learn more

Pipe, Profile & Tubing Extrusion in North America 2014

U.S. demand for extruded plastics is expected to grow by 3 percent in 2014, with PVC remaining the largest segment.

Plastic pipe will post the strongest gains through 2018, continuing to take market share from competing materials in a range of markets.

Our latest market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events