Plastic plays role in improved Chrysler interiors

Larry P. Vellequette

Published: November 26, 2012 6:00 am ET

Related to this story

Topics Materials, Automotive, Design

DETROIT (Nov. 26, 10:50 a.m. ET) — In any roomful of Detroit auto executives, the man most responsible for the dramatic interior improvements of Chrysler Group’s vehicles stands out dramatically.

Klaus Busse is tall and lanky with giant hands and an outsized smile. His standard attire is a light-gray windbreaker worn over a faded T-shirt and jeans. The 43-year-old’s spiky hair and soul patch — the small square of brown whiskers between his lower lip and pointed chin — are as distinctive to his outsized persona as is his still-strong German accent.

But the attribute that makes Chrysler’s head of interior design really stand out is that he chose to stay in Detroit for a trip through bankruptcy hell so he could help with the automaker’s resurrection.

A designer and top manager for former Chrysler owner Daimler AG, Busse volunteered to come to Chrysler in 2005 with his wife, Anja, and young sons, Paul and Oskar, for a two-year stint under an executive exchange program.

When his countrymen washed their hands of Daimler’s Chrysler experiment in 2007 and sold it to Cerberus Capital Management, Busse chose to stay in Detroit.

“It wasn’t Chrysler that gave up on Mercedes,” says Busse, who started his career in Stuttgart with a pair of Daimler internships. “It was Mercedes that gave up on Chrysler.”

Busse became a proud ex-pat, happier with the outsized contribution he makes here than with the promise of career security in Germany.

“If I had gone back to Mercedes, I could have probably contributed to Mercedes picking up another 2 percent improvement in their interiors, or something like that,” Busse says. “But I felt like I just had put in three years of my life here at Chrysler, and worked on all this new product and I wanted to see it come to market. I wanted to be part of this underdog turnaround.”

Busse says his interior design team’s close-up view of Chrysler’s near-death in 2009 and subsequent revival now inspires them to push every design envelope, taking no component for granted.

“It creates a work environment where you just hunker down,” Busse explained this month after showing off the luxurious leather interior of the 2013 SRT Viper. “It creates this special team spirit because everyone wants you to fail, and you’re clearly marked as the underdog — maybe worse than the underdog — and you think: ‘You know what? We’re going to show you.’”

Chrysler has ticked off 31 consecutive months of year-over-year sales gains with a lineup that looks little changed from early 2009, at least on paper. For Chrysler and its dealers, the biggest differences between its lineups in 2009 and today come down to two upgrades: improved quality and vastly improved interiors.

The company’s initial warranty claims have dropped by 60 percent since 2007. And analyst Jesse Toprak says upgraded Chrysler Group interiors are driving higher sales.

“If you look at Chrysler’s interiors prior to their latest models, they lagged virtually every automaker, including the other domestics,” Toprak says. But improved designs and upgraded materials “have not only brought more domestic conquests but also some import buyers that used to never give Chrysler a chance.”

Chrysler’s improved quality has many parents: a better trained work force, better supplier relations and a sound financial footing. But the company’s single-minded focus to improve the cabins of its vehicles came primarily from design chief Ralph Gilles and Busse, his chief interior lieutenant, when the two men were working on what would become the highly regarded re-engineer of the 2009 Dodge Ram.

“Ralph wanted to change interiors, and he wanted to change it on the pickup truck,” Busse says. Chrysler had just been stung by a Wall Street Journal review of the 2008 Chrysler Sebring that called the car “a veritable chalice of wretchedness ... all cast in plastic worthy of a Chinese water pistol.”

Top executives, including former Chrysler CEO Tom LaSorda, endorsed Gilles’ radical plan to have a design team that specialized solely on interiors. Most automakers have multiple design teams, many of which view exteriors as the ultimate creative expression and interiors as leftover work.

Gilles turned to the lanky German — whom he called “one of the best designers in the world” — to lead the effort, even as the old Chrysler grew sicker every day in 2008 and early 2009. Busse kept the interiors job even as Cerberus took Chrysler into bankruptcy in April 2009 and new owner Fiat SpA. came onto the scene two months later.

Interior art

Busse and his hand-picked team started with the Ram 1500 and moved on to the Jeep Grand Cherokee and Dodge Durango, focusing first on what drivers touch the most.

“We had to beef up the steering wheel to make it bigger and wrap it in fine leather. It’s the one piece that you hold all the time, so that’s where we spend our money,” Busse says, his long fingers wrapping around an imaginary circle in front of his chest. “The instrument cluster’s very important to us, too, because that’s where we show that we’re an American brand. And the materials have really been upgraded — the really fine leathers, the open-grained wood.”

The plastic is still there, Busse says. The difference is that now Chrysler’s designers pour effort into every component, even a small black mat in the Viper’s center stack.

“Plastic is plastic, and it’s the same price if I put in a design or I just make it flat. And you’ll see with the cars that are about to come out, you’ll see the attention to detail even in the plastic,” Busse says.

The Viper’s mat contains a molded image of the Laguna Seca racetrack, a Mecca for Viper owners, which cost Chrysler the same as if the mat was plain.

“One thing is just a flat black piece of plastic; one is a work of art,” Busse says. “That’s the interiors team that I’m happy to be the face of, the team that comes up with ideas and says, ‘You know, we can do better.’”

A complete version of this story is available at


Plastic plays role in improved Chrysler interiors

Larry P. Vellequette

Published: November 26, 2012 6:00 am ET

Post Your Comments

Back to story

More stories


DuPont investing $100 million for more ethylene copolymer capacity

September 16, 2014 1:51 pm ET

Increased packaging demand is leading materials giant DuPont Co. to spend more than $100 million to increase capacity for ethylene copolymers at its...    More


Canadian, Mexican injection molders form auto supply joint venture

September 16, 2014 2:26 pm ET

A new automotive parts manufacturer will open in Querétaro, Mexico, through a joint venture between Canadian automotive supplier Papp Plastics and...    More


Latvian plastics recycler Nordic Plast boosts capacity

September 16, 2014 10:15 am ET

Latvian plastics waste recycler Nordic Plast Ltd. has invested more than 2.5 million euros ($3.2 million) to expand capacity and modernize production ...    More


Increased capacity in the US helps Zeon Chemical supply seals globally

September 16, 2014 9:46 am ET

The automotive industry continues to be one of the driving forces of Zeon Chemicals LP., which specializes in heat-resistant and oil-resistant...    More


ZF finalizes deal to buy TRW, creating another global auto supply giant

September 15, 2014 1:09 pm ET

TRW Automotive Holdings, in a supply chain megadeal that has been in the works since mid-July, said Sept. 15 it has agreed to be acquired by German su...    More

Market Reports

Shale Gas Market - Analysis of North American Region

This report highlights the impact of shale-based natural gas on the North American plastics market and features an in-depth analysis of production trends in the United States during 2013 and a forecast for 2014 and beyond.

Learn more

Thermoformed Packaging 2014 Market Review & Outlook – North America

This in-depth report analyzes economic and market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as growth strategies being implemented by thermoformed packaging companies.

Learn more

Pipe, Profile & Tubing Extrusion in North America 2014

U.S. demand for extruded plastics is expected to grow by 3 percent in 2014, with PVC remaining the largest segment.

Plastic pipe will post the strongest gains through 2018, continuing to take market share from competing materials in a range of markets.

Our latest market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events