Plastic plays role in improved Chrysler interiors

Larry P. Vellequette

Published: November 26, 2012 6:00 am ET

Related to this story

Topics Automotive, Materials, Design

DETROIT (Nov. 26, 10:50 a.m. ET) — In any roomful of Detroit auto executives, the man most responsible for the dramatic interior improvements of Chrysler Group’s vehicles stands out dramatically.

Klaus Busse is tall and lanky with giant hands and an outsized smile. His standard attire is a light-gray windbreaker worn over a faded T-shirt and jeans. The 43-year-old’s spiky hair and soul patch — the small square of brown whiskers between his lower lip and pointed chin — are as distinctive to his outsized persona as is his still-strong German accent.

But the attribute that makes Chrysler’s head of interior design really stand out is that he chose to stay in Detroit for a trip through bankruptcy hell so he could help with the automaker’s resurrection.

A designer and top manager for former Chrysler owner Daimler AG, Busse volunteered to come to Chrysler in 2005 with his wife, Anja, and young sons, Paul and Oskar, for a two-year stint under an executive exchange program.

When his countrymen washed their hands of Daimler’s Chrysler experiment in 2007 and sold it to Cerberus Capital Management, Busse chose to stay in Detroit.

“It wasn’t Chrysler that gave up on Mercedes,” says Busse, who started his career in Stuttgart with a pair of Daimler internships. “It was Mercedes that gave up on Chrysler.”

Busse became a proud ex-pat, happier with the outsized contribution he makes here than with the promise of career security in Germany.

“If I had gone back to Mercedes, I could have probably contributed to Mercedes picking up another 2 percent improvement in their interiors, or something like that,” Busse says. “But I felt like I just had put in three years of my life here at Chrysler, and worked on all this new product and I wanted to see it come to market. I wanted to be part of this underdog turnaround.”

Busse says his interior design team’s close-up view of Chrysler’s near-death in 2009 and subsequent revival now inspires them to push every design envelope, taking no component for granted.

“It creates a work environment where you just hunker down,” Busse explained this month after showing off the luxurious leather interior of the 2013 SRT Viper. “It creates this special team spirit because everyone wants you to fail, and you’re clearly marked as the underdog — maybe worse than the underdog — and you think: ‘You know what? We’re going to show you.’”

Chrysler has ticked off 31 consecutive months of year-over-year sales gains with a lineup that looks little changed from early 2009, at least on paper. For Chrysler and its dealers, the biggest differences between its lineups in 2009 and today come down to two upgrades: improved quality and vastly improved interiors.

The company’s initial warranty claims have dropped by 60 percent since 2007. And Truecar.com analyst Jesse Toprak says upgraded Chrysler Group interiors are driving higher sales.

“If you look at Chrysler’s interiors prior to their latest models, they lagged virtually every automaker, including the other domestics,” Toprak says. But improved designs and upgraded materials “have not only brought more domestic conquests but also some import buyers that used to never give Chrysler a chance.”

Chrysler’s improved quality has many parents: a better trained work force, better supplier relations and a sound financial footing. But the company’s single-minded focus to improve the cabins of its vehicles came primarily from design chief Ralph Gilles and Busse, his chief interior lieutenant, when the two men were working on what would become the highly regarded re-engineer of the 2009 Dodge Ram.

“Ralph wanted to change interiors, and he wanted to change it on the pickup truck,” Busse says. Chrysler had just been stung by a Wall Street Journal review of the 2008 Chrysler Sebring that called the car “a veritable chalice of wretchedness ... all cast in plastic worthy of a Chinese water pistol.”

Top executives, including former Chrysler CEO Tom LaSorda, endorsed Gilles’ radical plan to have a design team that specialized solely on interiors. Most automakers have multiple design teams, many of which view exteriors as the ultimate creative expression and interiors as leftover work.

Gilles turned to the lanky German — whom he called “one of the best designers in the world” — to lead the effort, even as the old Chrysler grew sicker every day in 2008 and early 2009. Busse kept the interiors job even as Cerberus took Chrysler into bankruptcy in April 2009 and new owner Fiat SpA. came onto the scene two months later.

Interior art

Busse and his hand-picked team started with the Ram 1500 and moved on to the Jeep Grand Cherokee and Dodge Durango, focusing first on what drivers touch the most.

“We had to beef up the steering wheel to make it bigger and wrap it in fine leather. It’s the one piece that you hold all the time, so that’s where we spend our money,” Busse says, his long fingers wrapping around an imaginary circle in front of his chest. “The instrument cluster’s very important to us, too, because that’s where we show that we’re an American brand. And the materials have really been upgraded — the really fine leathers, the open-grained wood.”

The plastic is still there, Busse says. The difference is that now Chrysler’s designers pour effort into every component, even a small black mat in the Viper’s center stack.

“Plastic is plastic, and it’s the same price if I put in a design or I just make it flat. And you’ll see with the cars that are about to come out, you’ll see the attention to detail even in the plastic,” Busse says.

The Viper’s mat contains a molded image of the Laguna Seca racetrack, a Mecca for Viper owners, which cost Chrysler the same as if the mat was plain.

“One thing is just a flat black piece of plastic; one is a work of art,” Busse says. “That’s the interiors team that I’m happy to be the face of, the team that comes up with ideas and says, ‘You know, we can do better.’”

A complete version of this story is available at www.autonews.com.


Comments

Plastic plays role in improved Chrysler interiors

Larry P. Vellequette

Published: November 26, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

PolyOne says new Shanghai center will ease collaboration across segments

April 24, 2014 2:34 pm ET

PolyOne Specialty Engineered Materials is opening an innovation Center in Shanghai's Jinqiao development zone that will serve as its new Asia Pacific ...    More

Injection molder Precision Plastics adding space, presses in Indiana

April 24, 2014 2:54 pm ET

Custom injection molder Precision Plastics Inc. is expanding its Columbia City, Ind., operation.    More

Biopolymer firms report success with PHA pilot production

April 24, 2014 1:30 pm ET

Biopolymer developer Meridian Inc. and Tate & Lyle plc have reported successful pilot production of Meridian's process to make polyhydroxyalkanoate,...    More

Songwon acquires division of India's SeQuent

April 24, 2014 12:22 pm ET

Songwon Industrial Group of South Korea has signed a deal with SeQuent Scientific Limited, India to acquire SeQuent's specialty chemicals business.    More

Image

Performance Plastics unit helps lead to increase in sales for Dow Chemical

April 24, 2014 9:57 am ET

Dow reported turnover of $14.5 billion April 23, including an adjusted 6 percent increase in sales at its performance plastics operation, which it att...    More

Market Reports

Market Data Book - Rankings & Lists

A one-stop download of Plastic News' exclusive annual lists and processor rankings containing essential data including sales, employees, end markets, materials and more.
EXCLUSIVE EXCEL FEATURE: full mailing address details for available plant locations.

Learn more

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report provides analysis and discussions of economic and political conditions, market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as strategies being implemented by thermoformed packaging companies. In addition, there are reviews of 25 leading thermoformers in the packaging segment, assessing their growth initiatives and performance metrics over 10 years.

Learn more

Mold Making and Tooling Review and Outlook 2014 North America

This report provides in-depth analysis of the mold and toolmaking market for North America, including discussions of trends, opportunities, threats, the latest developments in production and labor and equipment trends impacting moldmakers.

Learn more

Upcoming Plastics News Events

May 6, 2014 - May 8, 2014Plastics in Medical Devices 2014

May 12, 2014 - May 12, 2014Plastics News Brazil Pharma Summit

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

February 3, 2015 - February 7, 2015Plastics News Executive Forum 2015

More Events