Obama to press his tax plan at Pa. molder Rodon Group

Mike Verespej

Published: November 27, 2012 6:00 am ET

Related to this story

Topics Public Policy, Consumer Products, Injection Molding

WASHINGTON (Updated Nov. 28, 11:45 a.m. ET) — President Barack Obama will visit custom injection molder Rodon Group LLC in Hatfield, Pa., on Nov. 30 as part of his week-long effort to garner support for his proposal to extend tax cuts for middle-income people and end them for families who make more than $250,000 a year.

Rodon Group, one of the finalists for the Plastics News processor of the year in January, is a subsidiary of K’Nex Brands LP, which makes K’Nex building toys. The two privately held companies are both owned by Joel Glickman, the inventor of the K’Nex building toy system.

“The president will travel to Montgomery County, Pa. to continue make the public case for action by visiting a business that depends on middle class consumers during the holiday season and could be impacted if taxes go up on 98 percent of Americans at the end of the year,” said a White House representative.

“We are ... excited to welcome the President and show him how we make the K’Nex bricks, rods and connectors you love,” said the company on its Facebook page.

“K’Nex brands and the Rodon Group are honored that President Obama is touring our facility later this week,” added Rodon and K’Nex CEO and President Michael Araten, in a statement issued by the company. “Since 1956, we have been committed to advanced American manufacturing, innovation and entrepreneurship. As a result, K’Nex is exported to over 40 countries around the world.”

Irving Glickman, who founded Rodon in 1956, celebrated his 100th birthday in April. The company is a leading advocate for U.S. manufacturing, with its motto of “We Beat China Pricing.”

Glickman was a pioneer of synthetic rubber who saw the potential of thermoplastics. He started Rodon with four Stokes injection molding machines in his garage. The company expanded into a small factory, then built its current factory in Hatfield in 1987.

In 1991, his son, Joel Glickman, developed the rods and connectors that became K’Nex toys. After major toy makers rejected the idea, Rodon began molding the parts and started K’Nex Brands LP as a sister company.

Joel’s son-in-law, Michael Araten, is now president and CEO of Rodon and K’Nex.

Obama's meeting with Rodon will mark the second time in a week that a plastics company executive has had the President's attention. On Nov. 27, Andra Rush, the head of two auto interior joint ventures, was among the small business owners invited to the White House to discuss the economy.

Rush owns Wayne, Mich.-based Rush Trucking and heads up Dakkota Integrated Systems, a joint venture with Magna International Inc.'s Intier group, and recently launched Detroit Manufacturing Systems, a joint venture with Faurecia SA that will take on some of the business previously located at the former Automotive Components Holdings LLC in Saline, Mich.

Earlier this week, the White House released a report that outlined the impact that middle class tax increases would have on both consumers and the retail industry. The White House also released an analysis by the National Economic Council which said that millions of small-business owners would suffer if the middle class taxes went up next year.

Republicans want to preserve all the Bush tax cuts set to expire Jan. 1, reduce government spending to cut into the nation’s debt of more than $16 trillion-plus debt, and close tax loopholes to increase government revenues.

Since 1992, Rodon has manufactured over 30 billion parts for the K’Nex building toy system. K’Nex is distributed to over 30 countries, and over 95 percent of the component parts are made at Rodon, which is an injection molder with a focus on small parts used in more than 100 different industries, including food, beverage, consumer packaged goods, construction and toys.


Comments

Obama to press his tax plan at Pa. molder Rodon Group

Mike Verespej

Published: November 27, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Louisiana molder expands into former Yoo-hoo bottling plant

October 31, 2014 1:51 pm ET

Noble Plastics Inc. plans to expand its manufacturing capabilities with the purchase of a former Yoo-hoo bottling plant in Opelousas, La., eight...    More

Image

Arburg inks training pact with Taiwan's Ming Chi University

October 31, 2014 2:24 pm ET

German injection molding press maker Arburg GmbH + Co. KG announced this week that it has inked a cooperative deal with Taiwan's Ming Chi University...    More

Image

Hong Kong injection molding equipment maker enters US market

October 31, 2014 1:39 pm ET

Hong Kong-based L.K. Technology Holdings Ltd. is entering the North American plastics processing market with a line of its eXcel injection molding...    More

Image

Comco Plastics in bitter lawsuit with former VP

October 31, 2014 2:17 pm ET

Comco Plastics Inc. is suing a former vice president of sales, his wife, the company they started and a former supplier, in part for allegedly...    More

Image

Magna opens new exterior facility, plans for lighting investment

October 30, 2014 1:36 pm ET

Canadian automotive supplier Magna International Inc. on Oct. 28 opened a new injection molding and robotic paint line facility in Delta Township, Mic...    More

Market Reports

Pipe, Profile & Tubing Extrusion Market Trends

This report provides in-depth analysis of current trends, statistics and innovations in product design and production impacting the PP&T industry in North America.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 million dollar plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our analysts provide insight on business trends, foreign investment, top end markets and plastics processing activity. The report also provides important data on exports, production, employment and value of plastics products manufactured.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

October 27, 2015 - October 29, 2015Plastics Financial Summit - New York - 2015

More Events