Rotational molder Elkhart Plastics expanding

By Bill Bregar
Senior Staff Reporter

Published: November 28, 2012 6:00 am ET

Related to this story

Topics Automotive, Rotomolding

SOUTH BEND, IND. (Nov. 28, 3:55 p.m. ET) — Custom rotational molder Elkhart Plastics Inc. is adding a 25,000-square-foot expansion and plans to add 50 new jobs over the next three years at its headquarters in South Bend.

CEO Jack Welter said the company initially plans to hire about 20 people, and buy two rotomolding machines, for the addition. That will bring Elkhart Plastics’ total square footage to more than 100,000 in South Bend. Site preparation has already begun, and the expansion should be completed by end of the first quarter of 2013.

Welter said the company is spending $1.75 million for the building, two machines and to hire the 20 employees. The Indiana Economic Development Corp. reports the total investment at $3.8 million, but Welter said that figure includes additional machines and another 30 workers, which will be added over the next three years.

Welter said part of the expansion is to handle a large contract for emissions systems for diesel-powered heavy equipment, such as tractors, construction equipment, and semi trucks. The focus on reducing emissions has led to an increased for rotomolded components, he said. He declined to give more details.

Meanwhile, company officials have brought back the well-known Elkhart Plastics name for the entire company, scrapping the former moniker of Indiana Rotomolding. In early 2011, Welter and a group of fellow managers bought five custom rotomolding plants from Olympus Partners, a private equity firm. The plants were Elkhart Plastics and Bonar Plastics operations.

Welter is an Elkhart Plastics veteran who became president in 1994.

Elkhart Plastics is the eighth-largest rotomolder in North America, with sales of $61.5 million, according to the latest Plastics News ranking. The company runs 41 rotomolding machines at five plants, three in Indiana—South Bend, Elkhart and Middlebury—and one each in Littleton, Colo., and Ridgefield, Wash.

Elkhart Plastics is getting government help for the expansion in South Bend. The Indiana Economic Development Corp. will give the company up to $250,000 on conditional tax credits and up to $35,000 in training grants, contingent on job creation.

The city of South Bend also is considering additional property tax abatement, IEDC said.

Welter said the training grants are important to help find and train people in rotomolding. He said finding good workers is “the only limiting factor to our aggressive growth plan.”

Rotational molding is physical work, and the machine operators play an important role in producing quality products, Welter said.

“You can train somebody. It really comes down to finding people who want to put in a good day’s work for a good day’s pay,” he said. “We’re certainly willing to train people who are willing to commit to us.”

Elkhart Plastics employs about 500 at the five plants.

Elkhart Plastics was founded in 1988 with one machine molding parts for Indiana’s recreational vehicle industry. Welter said the Hoosier State has good proximity to customers.

“We place a great deal of value in our relationship with the city of South Bend and the state of Indiana and appreciate the effort that went into allowing us to expand,” he said.


Comments

Rotational molder Elkhart Plastics expanding

By Bill Bregar
Senior Staff Reporter

Published: November 28, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Detroit Manufacturing Systems to hire 200 for F-150 production

October 29, 2014 10:40 am ET

Interior trim supplier Detroit Manufacturing Systems LLC plans to hire 200 assembly workers by January to support production growth of Ford Motor Co....    More

Image

Automakers globally using 3-D printing to speed production, prototyping

October 27, 2014 11:41 am ET

As the cost declines and capabilities improve, automakers and suppliers increasingly are relying on 3-D printing to shorten product development...    More

Image

SRG opens second China auto parts factory

October 24, 2014 11:25 am ET

U.S. automotive supplier SRG Global Inc. said Oct. 23 it is opening its second plant in China, an injection molding, plating and painting facility in ...    More

Image

Toyoda Gosei's growth strategy places a big focus on North America

October 23, 2014 1:21 pm ET

Sometimes, knowing your weaknesses is just as important as knowing your strengths. And if 2014 is any indication, automotive supplier Toyoda Gosei Co....    More

Image

Ford's final ACH plant, injection molder of HVAC systems, to close

October 22, 2014 1:58 pm ET

Ford Motor Co. will shed the last line of business in 9-year-old Automotive Component Holdings LLC by December when ACH closes its Plymouth, Mich., cl...    More

Market Reports

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 million dollar plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our analysts provide insight on business trends, foreign investment, top end markets and plastics processing activity. The report also provides important data on exports, production, employment and value of plastics products manufactured.

Learn more

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

October 27, 2015 - October 29, 2015Plastics Financial Summit - New York - 2015

More Events