Industrial recycler adds capacity in North Carolina

Mike Verespej

Published: November 28, 2012 6:00 am ET

Related to this story

Topics Materials, Suppliers, Sustainability, Recycling

ERIE, PA. (Nov. 28, 3:50 p.m. ET) — Pennsylvania-based EPI Recycling Solutions has begun pellet production at its industrial plastics recycling plant in Sanford, N.C.

The pellets are being produced with an S:GRAN 125 recycling machine that can reprocess 1,500 pounds of material per hour, increasing the plant’s capacity to 1 million pounds per month, said Kurt Duska, president of both EPI Recycling Solutions of Erie, Pa., and sister company injection molding contract manufacturer Engineered Plastics LLC, whose molding plant is in Lake City, Pa.

The 30,000 square foot plant in Sanford — the first recycling plant for EPI outside of its headquarters plant in Erie — represents an investment of more $1.1 million. It opened in April with a single granulator and baler.

“To service our existing national customers, increase our customer base, and to offer service to multiple locations, it was necessary to open an additional facility,” Duska told Plastics News. “Recycling facilities are typically limited due to incoming freight cost. Our model is a 300-mile radius for incoming material, and the Sanford facility is 600 miles from our primary facility in Erie.

“Opening a facility in Sanford [gives us] the capability to handle large sections of the country [as the] North Carolina area has many customers that are looking for our capabilities and recycling concepts.

“The NGR shredder/densifier/pelletizer offers us one machine that can process multiple materials in various forms,” he said. “We need to be able to process everything from 150-pound ABS purges to polystyrene and polyethylene foam, and molding scrap to thermoform trays.”

Duska expects the shredder, made by Austrian-based Next Generation Recyclingmaschinen GmbH, to be operating on three shifts in January, just as its Erie plant that already operates around the clock.

“We are excited to add the NGR equipment to our offering of services and see this as a long-term investment in North Carolina,” he said. “We believe that coupling the latest design in recycling equipment with our creative recycling concepts will allow companies to convert waste-plastic cost to revenue and improve their environmental position.

“Our main focus is post-industrial plastics,” said Duska. “The majority of our work is in packaging and process scrap. We handle flexible films on rolls and bulk including [polyethylene], polypropylene, biaxially oriented polypropylene film, as well as bags and stretch film.”

He said the company also reprocesses some multi-layer materials and all rigid plastics including engineered grades and filled material from injection, blow and extrusion applications.

In addition, he said the company works with hospitals and other non-manufacturing businesses on clean packaging and sustainability as Engineered Plastics was one of the eight founding members of the now 18-month-old Healthcare Plastics Recycling Council.

Duska said the company strives to provide creative solutions to customers at both of its recycling plants.

“We have developed a post-industrial single-stream program for customers that we manage,” he said. “Our post-industrial stream is focused on plastics, but it also offers mixed trailer solutions for cardboard, metal, paper and other items.”

That approach, said Duska, provides customers with a solution for low to high volume products. On one truck, there may be blow molded bottles, rolls of film, baled cardboard, scrap injection parts, and 100-pound purges.

“The process starts with a waste audit, but it never really ends,” Duska said. “We look at process scrap, and internal and external logistics. In addition, we design changes in systems and materials to improve recycling and eliminate waste.

“Often, we participate up and down stream to provide a complete recycling solution,” he said “We can offer unique disassembly and sorting programs geared to specific customers needs.” A case in point: it recently helped divert more than 175,000 lbs. of thermoset plastics from landfills.

“This is an opportunity for the state to improve its post industrial recycling and help reduce bottom line spending,” explained Bob Heuts, director of the Lee County Economic Development Corp. “Companies won’t have to pay to dispose of their materials and it will reduce” costs companies incur when they send materials to landfills.


Comments

Industrial recycler adds capacity in North Carolina

Mike Verespej

Published: November 28, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

PE suppliers go after oxo-biodegradable technology in Mexico

July 31, 2014 1:12 pm ET

Mexican industry defends itself, calling claims 'misleading'    More

Bioplastic created using rice starch

July 31, 2014 10:40 am ET

The new transparent, biodegradable material has a high degree of mechanical strength and good thermal resistance.    More

Image

DC banning PS foam containers

July 30, 2014 2:34 pm ET

Washington D.C. Mayor Vincent Gray signed into law on July 29 a bill that will ban polystyrene foam food and drink containers from the District.    More

Image

UMass Lowell hosts collaborative research meeting for future projects

July 30, 2014 11:54 am ET

The University of Massachusetts at Lowell recently hosted a seminar, which was billed as a collaborative research meeting between Dow Chemical Co.,...    More

Image

North American robot sales set record

July 30, 2014 4:46 pm ET

The North American robotics sector is off to its fastest start ever, shattering last year's first-half record, with a first-half 2014 of 14,135 robots...    More

Market Reports

Pipe, Profile & Tubing Extrusion in North America 2014

U.S. demand for extruded plastics is expected to grow by 3 percent in 2014, with PVC remaining the largest segment.

Plastic pipe will post the strongest gains through 2018, continuing to take market share from competing materials in a range of markets.

Our latest market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Learn more

2014 Injection Molding Industry Report

GROWTH, OPPORTUNITY IN SIGHT FOR INJECTION MOLDERS IN 2014

In the wake of the economic turbulence earlier in this decade, molders today find themselves in much better shape. Molders are gaining a competitive advantage by investing in people, equipment and seeking inroads into new markets on a global scale.

Growth in the injection molding industry is going to be driven by low financing costs and a continued move to reshore some business.

Learn more

Shale Gas Market - Analysis of North American Region

This report highlights the impact of shale-based natural gas on the North American plastics market and features an in-depth analysis of production trends in the United States during 2013 and a forecast for 2014 and beyond.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events