Tooling pioneer DeRocher dead at 93

Published: November 28, 2012 6:00 am ET

Related to this story

Topics Injection Molding, Molds/Tooling

CHAGRIN FALLS, OHIO (Nov. 28, 3:40 p.m. ET) — Henry DeRocher, a pioneer in injection tooling who founded his own molding company at age 60, died Nov. 21 at age 93.

Born in Parker, Pa., DeRocher trained in metallurgical engineering at the Carnegie Institute of Technology before moving to Cleveland to develop plastic injection molds. He eventually founded Automation Plastics Corp., an injection molder in Aurora, Ohio, in 1980.

After college, DeRocher did research for the U.S. Navy to develop nylon rotating bands to reduce barrel wear on large battleship guns. For his research, he visited Nylon Molded Products (Nymold) in Ohio, which made prototype parts for the project.

DeRocher joined the firm in 1953, working at plants in Bedford Heights and Garrettsville, Ohio. At Nymold he worked closely with another pioneering plastics molder, Robert Hoffer Sr., who later founded Hoffer Plastics Corp. in South Elgin, Ill.

Nymold developed more than 1,000 molds during DeRocher’s tenure, according to Harry Smith, who later served as DeRocher’s general manager at Automation Plastics. Smith bought the company from DeRocher in 1999, and now serves as president.

“When Henry began Automation Plastics in 1980, at the age of 60, he began molding nylon battery seals for Union Carbide in 32- and 64-cavity molds. Henry developed many high-cavity molds as well as very long life molds,” Smith said.

“One of the 128 cavity aerosol molds for Seaquist ran over 40 million cycles in its lifetime,” Smith said.

DeRocher continued to keep an eye on Automation Plastics after he sold the company, even after he retired in 2004. Today the firm has more than 100 employees and molds nearly 2 billion parts per year.

“Henry’s early vision of the company was to design and build custom tooling and to mold close tolerance flash-free parts for automated assembly,” Smith said. “Having in-house mold maintenance capability has been pivotal to the company’s success.”

Smith said DeRocher was a trained engineer, but he “wore just about every hat there was to wear in a start-up business.”

“It’s been a privilege to work side by side with a pioneer of the injection molding industry. Both his technical genius and business acumen have been nothing short of remarkable,” Smith said. “He always enjoyed the challenge presented by developing the next generation mold design for his customers, but in his later years, perhaps he enjoyed even more, developing the next generation of people to continue the business he created.”

DeRocher is survived by his son Ben and daughter Josephine.

A memorial service will be held at the Federated Church in Chagrin Falls on Saturday, Dec. 1 at 2 p.m.


Comments

Tooling pioneer DeRocher dead at 93

Published: November 28, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Mold maker I. Thibault plans to invest more capital in Mexico

December 16, 2014 1:03 pm ET

Canadian mold maker I. Thibault Inc. plans to invest more capital in its wholly owned Mexican subsidiary, which it started operating in the summer.    More

Image

Milacron opening Mexico technical center, considers another in Brazil

December 16, 2014 12:58 pm ET

Milacron LLC plans to officially open a new technical center in Querétaro, 140 miles northwest of Mexico City, early in 2015, and the company is...    More

Image

Indian mold maker Vasantha sees 'great potential' in Mexico

December 16, 2014 12:52 pm ET

Indian mold maker Vasantha Tool Crafts Pvt. Ltd. has appointed its first sales representative in Mexico, 15-year plastics industry professional Eric...    More

Image

Plastikos, Micro Mold working with local high school

December 15, 2014 6:00 am ET

The companies donated a 60-ton Demag injection press to the school, and Micro Mold’s general manager has worked with the high school's tool...    More

Image

New leader gives molder a spark

December 12, 2014 11:40 am ET

A dynamic 32-year-old woman is energizing a Woodstock, Ill., injection molding business that her grandfather, now 80, founded as a tool shop.    More

Market Reports

Flexible Packaging Trends in North America

Our latest RESEARCH report examines trends in FLEXIBLE PACKAGING impacting the North American market including a review of economic conditions, key drivers of growth, materials pricing, M&A activity, sustainability challenges and the outlook for 2015.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 billion plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our analysts provide insight on business trends, foreign investment, top end markets and plastics processing activity. The report also provides important data on exports, production, employment and value of plastics products manufactured.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

October 27, 2015 - October 29, 2015Plastics Financial Summit - New York - 2015

More Events