Processors report price increases for PP and PET

By Frank Esposito
Senior Staff Reporter

Published: November 29, 2012 6:00 am ET

Related to this story

Topics Materials, Suppliers

AKRON, OHIO (Nov. 29, 1:15 p.m. ET) — North American prices for polypropylene and PET bottle resin have continued to climb in recent months.

Regional PP prices have jumped up an average of 4 cents per pound since Nov. 1, following a similar increase in price for propylene monomer feedstock. The increase marks the third straight month that PP prices in the region have headed up, following a combined increase of 3 cents per pound in September and October.

The November increase also edges PP prices for the year up a net of 2 cents per pound since Jan. 1 – an increase of about 2 percent. In addition to the influence of monomer, some buyers expressed concern that short-term outages at plants operated by Braskem Americas in Marcus Hook, Pa., and by Phillips 66 Corp. in Linden, N.J., could impact PP availability in the region. Both plants temporarily lost electrical power when Hurricane Sandy hit the U.S. East Coast on Oct. 29.

One PP buyer in the U.S. Midwest, however, questioned the reality of a possible PP shortage. “I haven’t seen one,” he said. “If there are any, it’s only because producers want to create the shortage in hopes of driving additional price increases beyond the [propylene monomer] price change.”

Another PP market watcher said that he’s seen some PP makers “have some success in margin expansion.”

Through September, U.S./Canadian PP sales were up just under 3 percent, according to the American Chemistry Council in Washington. Domestic sales growth of almost 4 percent was dampened by a 15 percent decline in export sales.

For PET, tightness in feedstock supplies have sent prices up an average of 9 cents per pound since Sept. 1. A 5-cent September increase was followed by increases of 2 cents in both October and November.

The increases – totaling almost 10 percent higher than August prices - have come as a bit of a surprise to buyers in the region, since the beverage-heavy PET market usually slows a bit during the cooler months at the end of the year. Market watchers estimated that current North American PET operating rates are around 75 percent.

The recent PET price increases mean that regional prices now are up a net of 1 cent per pound since Jan. 1 – an increase of about 1 percent. Demand growth for the year in North America is expected to be up no more than 2 percent, industry contacts said.

Plastics News also this week is showing a 1-cent upward correction on North American prices of suspension PVC. PN previously showed an increase of 2 cents per pound for that material for October, but subsequent interviews have shown that the full 3-cent increase that PVC makers were seeking went through to most buyers.

The 1-cent correction means that regional suspension PVC prices were up an average of 3 cents in both September and October. Prices now are up a net of 3 cents from their Jan. 1 levels, for an increase of about 3 percent.

U.S./Canadian PVC sales were up almost 6 percent through September, according to ACC, with domestic growth of almost 7 percent slightly lessened by export growth of more than 4 percent.


Comments

Processors report price increases for PP and PET

By Frank Esposito
Senior Staff Reporter

Published: November 29, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Audacious vandal stuns Taipei Plas

September 29, 2014 4:59 pm ET

Melodrama erupted at the traditionally tranquil Taipei Plas trade show on Sept. 28 when a mysterious intruder flung red paint at the Baumüller...    More

Image

Asahi Kasei breaks ground on Alabama compounding plant

September 29, 2014 5:39 pm ET

Asahi Kasei Plastics North America will be able to solve two problems at once with a new compounding plant in Athens, Ala.    More

Image

Shini pushes into western China

September 29, 2014 4:28 pm ET

Despite intellectual-property brigands, Taiwan's Shini Plastics Technologies Inc. is zestfully pursuing the enormous Chinese market for plastics...    More

Image

DuPont shifting Teflon production in China

September 29, 2014 2:35 pm ET

DuPont Co. will spend more than $15 million to improve its fluoropolymer product offerings in China.    More

Image

Sale of PVC maker Oltchim still in limbo

September 29, 2014 10:25 am ET

Fresh attempts to privatize insolvent Romanian PVC producer Oltchim SA have met with new obstacles as the European Union questioned the Romanian gover...    More

Market Reports

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 million dollar plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our industry analysis highlights macro industry trends and micro trends faced by companies that do business in Mexico. The report also provides key industry statistics and forecasts to anticipate future industry expansion.

Learn more

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Injection Molders Market Report & Ranking 2014

This special package contains our 132-page 2014 Market Report on the Injection Molding segment and our exclusive 2014 RANKINGS database of 500+ Injection Molders for a discounted package price.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events