Argonne wins 'Manhattan Project' for car batteries

Paul Merrion

Published: November 29, 2012 6:00 am ET

Related to this story

Topics Materials, Sustainability, Automotive, Design

WASHINGTON (Nov. 29, 1 p.m. ET) — Argonne National Laboratory has won federal funding for a highly coveted research center modeled after Bell Labs and the Manhattan Project that will aim to create smaller, cheaper batteries for electric vehicles and other long-range energy needs.

The Energy Department’s decision is expected to be announced later this week, according to two Capitol Hill sources.

Argonne’s Joint Center for Energy Storage Research proposal, which includes a team of four other national labs, four universities and private industry, was supported by 10 senators and 39 representatives, including most of the Illinois congressional delegation, according to a letter of support last April.

The main purpose of the research effort is to dramatically bring down the size, weight and cost of batteries for electric and hybrid cars. More efficient, longer-lasting batteries also are needed to make variable wind and solar power a more important part of the electrical grid.

Argonne, located in Argonne, Ill., about 25 miles southwest of Chicago, developed the lithium battery technology used in the Chevy Volt and is already a leader in battery research. But this new multidisciplinary center was viewed as critical to cementing its role at the forefront of battery development.

“In order to meet our energy goals – putting 1 million electric hybrid vehicles on the road and producing 25 percent of all electricity from solar and wind by 2015 – the U.S. must invest in the type of large-scale innovative research that will produce major breakthroughs in energy storage technology,” Sen. Richard Durbin, D-Ill., said in a statement last July after meeting with Energy Secretary Steven Chu about the proposal.

Winning the battery research center was a top priority for Argonne, and it lead to a full-court press by Sen. Durbin as well as Sen. Mark Kirk, R-Ill., and Rep. Judy Biggert, R-Hinsdale, who lost her bid for re-election this year. Chicago Mayor Rahm Emanuel and Gov. Pat Quinn also pushed hard for the project.

Congress already has approved $20 million to launch the research center, and it’s expected to be funded at $25 million a year for the next four years. The state of Illinois also is expected to help support the project, but the amount could not be confirmed last night.

An Argonne spokesman could not confirm the award and an Energy Department spokesman declined to comment.

The Argonne team includes the University of Chicago, which runs Argonne under a DOE contract, as well as Northwestern University, the University of Illinois at Urbana-Champaign and the University of Michigan.

Other national lab partners include Lawrence Berkeley, Pacific Northwest and Sandia, as well as SLAC National Accelerator Laboratory, according to a congressional letter of support from last April.

Private industry collaborators include Santa Clara, Calif.-based Applied Materials Inc., Midland, Mich.-based Dow Chemical Co. and Glendale, Wis.-based Johnson Controls Inc. A fourth partner, Waltham, Mass.-based A123 Systems Inc., filed for bankruptcy protection last month and has reached a tentative agreement to sell its battery business to Johnson Controls.

“We believe that a large team multidisciplinary hub research environment would really link the fundamental science and engineering research to technology and production needs that are really necessary to have rapid and meaningful advances across the spectrum,” said Linda Horton, director of material sciences and engineering in the Energy Department’s Office of Basic Sciences, according to a transcript of a briefing for competitors on the project last year. “You never know where the advances are going to happen. But what the hub can bring is a focus across the technologies to really enable not just current solutions or science advances but next generation battery technologies.”


Comments

Argonne wins 'Manhattan Project' for car batteries

Paul Merrion

Published: November 29, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

China's biggest fuel tank maker getting a US foothold

April 23, 2014 4:41 pm ET

The majority owner of China's biggest fuel tank maker is expanding its global automotive footprint with the acquisition of the fuel tank unit of...    More

Image

China's Shide Group, BASF unveil 'revolutionary' all-plastic window profile

April 23, 2014 9:10 pm ET

SHANGHAI — The PVC window profile market in Asia is expected to increase four-fold by 2025, and Chinese building products maker Dalian Shide...    More

Worker dies in fall at Formosa Texas plant

April 23, 2014 4:04 pm ET

A subcontractor died April 22 after falling 25 feet during routine cleaning operations at a Formosa Plastics Corp. USA facility in Point Comfort,...    More

Image

Milliken expanding SC plant for additional PP clarifying agent capacity

April 23, 2014 3:42 pm ET

American chemical company Milliken & Co. has announced plans for a major expansion in capacity for its Millad NX8000 clarifying agent for...    More

Clariant says Asia holds the key to growth

April 23, 2014 3:52 pm ET

Clariant AG is based in Switzerland, but its eyes are firmly focused further east.    More

Market Reports

Market Data Book - Rankings & Lists

A one-stop download of Plastic News' exclusive annual lists and processor rankings containing essential data including sales, employees, end markets, materials and more.
EXCLUSIVE EXCEL FEATURE: full mailing address details for available plant locations.

Learn more

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report provides analysis and discussions of economic and political conditions, market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as strategies being implemented by thermoformed packaging companies. In addition, there are reviews of 25 leading thermoformers in the packaging segment, assessing their growth initiatives and performance metrics over 10 years.

Learn more

Mold Making and Tooling Review and Outlook 2014 North America

This report provides in-depth analysis of the mold and toolmaking market for North America, including discussions of trends, opportunities, threats, the latest developments in production and labor and equipment trends impacting moldmakers.

Learn more

Upcoming Plastics News Events

May 6, 2014 - May 8, 2014Plastics in Medical Devices 2014

May 12, 2014 - May 12, 2014Plastics News Brazil Pharma Summit

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

February 3, 2015 - February 7, 2015Plastics News Executive Forum 2015

More Events