DuPont invests in packaging development lab

Published: November 30, 2012 6:00 am ET

Related to this story

Topics Packaging, Materials, Blow Molding, Suppliers

CHICAGO (Nov. 30, 1:45 p.m. ET) — DuPont Co. is adding new equipment to its Packaging & Industrial Polymers’ development laboratory, housed at company headquarters in Wilmington, Del.

A pilot-scale, nine-layer blown film line will be up and running by the first quarter of 2013, said Ann Hriciga, DuPont’s global application development manager, in a presentation at Pack Expo 2012, held Oct. 28-31 in Chicago.

The nine-layer line is designed for flexibility and intended for developmental work, not commercial production. It can make film 1 to 10 mils thick and has nine separate extruders, so users have the ability to put nine different materials into a structure. Not all of the extruders are identical – some are tailored for specific materials – but they can be moved around, giving the user the flexibility to run a line of “a-b-c-d one day and d-b-c-a the next day,” she said.

By using the pilot-scale line, customers can test out different structures quickly and use less material, she said.

“For our customers, it’s always a balancing act of performance, of cost, and, increasingly, sustainability,” Hriciga said.

The development lab aims to help customers prioritize and balance those requirements, whether it’s working with a new polymer, formulating a new compound or designing a new packaging structure.

In addition to the nine-layer line, the lab has a variety of pilot-scale equipment, including a high-pressure autoclave, multi-layer film lines, and downstream equipment that allows customer to try out different packaging structures without interrupting production, she said.

It also houses testing capabilities that are open to customers both when developing new structures and when problems arise. If a company has a DuPont material as part of their structure, DuPont will help them understand what went wrong and ensure it doesn’t happen again, Hriciga said.

DuPont has used modeling tools to address packaging problems for more than 20 years. The company traditionally ran the programs in-house and shared results with customers, but it’s now offering more and more of them online, she said.

For example, DuPont customers can use online applications to evaluate sealants and tie resins, she said.

Along with its development programs, DuPont used Pack Expo to highlight the company’s focus on global challenges, namely food safety and shortages, increasing energy demand, and the need to keep people and the environment safe.

“It’s vital for people around the world to be healthier and safer,” she said. “We think we have some strong reasons to focus on delivering that.”

DuPont has a hand in many areas, including chemistry, material science and biology, so it can quickly put people in different functions together to come up with innovations and solutions, she said.

Tackling a major challenge like feeding the world requires focusing on every aspect of the issue, from seeding planting to packaging, she said.

In DuPont’s case, that includes developing disease-resistant strains of grain, developing food ingredients that make people healthier – like salmon that have been fed Omega 3 oils to give their meat more protein – and working with local value chains to ensure that food can make it market without spoiling, she said.


Comments

DuPont invests in packaging development lab

Published: November 30, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

RPC expansion provides the space needed for continued growth

September 22, 2014 11:46 am ET

MORGANTOWN, PA. — Success, over time, created a challenge for RPC Bramlage-Wiko USA Inc. in this rural Eastern Pennsylvania town....    More

Image

Hong Kong's TK eyes expansion, may buy Nypro Tool operation

September 19, 2014 2:49 pm ET

Hong Kong-based mold maker and plastics processor TK Group (Holdings) Ltd. said it's reached a tentative agreement to buy a tooling factory in...    More

Exo-s buys injection and blow molder in Mexico, expands footprint

September 19, 2014 2:15 pm ET

Custom molder Exo-s Inc. has bought an injection and blow molding operation in San Juan del Rio, Querétaro, Mexico.    More

Image

Foster building medical polymers plant

September 19, 2014 1:39 pm ET

Foster Delivery Science is investing $8 million in a new plant in Putnam, Conn., for production of medical polymer blends, as well as rods, film or...    More

Image

BP to restart damaged PTA unit in limited capacity by November

September 19, 2014 10:27 am ET

British Petroleum plc may restart its fire-damaged purified terephthalic acid (PTA) feedstock unit in South Carolina in late October or early November...    More

Market Reports

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Shale Gas Market - Analysis of North American Region

This report highlights the impact of shale-based natural gas on the North American plastics market and features an in-depth analysis of production trends in the United States during 2013 and a forecast for 2014 and beyond.

Learn more

Thermoformed Packaging 2014 Market Review & Outlook – North America

This in-depth report analyzes economic and market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as growth strategies being implemented by thermoformed packaging companies.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events