DuPont invests in packaging development lab

Published: November 30, 2012 6:00 am ET

Related to this story

Topics Materials, Suppliers, Packaging, Blow Molding

CHICAGO (Nov. 30, 1:45 p.m. ET) — DuPont Co. is adding new equipment to its Packaging & Industrial Polymers’ development laboratory, housed at company headquarters in Wilmington, Del.

A pilot-scale, nine-layer blown film line will be up and running by the first quarter of 2013, said Ann Hriciga, DuPont’s global application development manager, in a presentation at Pack Expo 2012, held Oct. 28-31 in Chicago.

The nine-layer line is designed for flexibility and intended for developmental work, not commercial production. It can make film 1 to 10 mils thick and has nine separate extruders, so users have the ability to put nine different materials into a structure. Not all of the extruders are identical – some are tailored for specific materials – but they can be moved around, giving the user the flexibility to run a line of “a-b-c-d one day and d-b-c-a the next day,” she said.

By using the pilot-scale line, customers can test out different structures quickly and use less material, she said.

“For our customers, it’s always a balancing act of performance, of cost, and, increasingly, sustainability,” Hriciga said.

The development lab aims to help customers prioritize and balance those requirements, whether it’s working with a new polymer, formulating a new compound or designing a new packaging structure.

In addition to the nine-layer line, the lab has a variety of pilot-scale equipment, including a high-pressure autoclave, multi-layer film lines, and downstream equipment that allows customer to try out different packaging structures without interrupting production, she said.

It also houses testing capabilities that are open to customers both when developing new structures and when problems arise. If a company has a DuPont material as part of their structure, DuPont will help them understand what went wrong and ensure it doesn’t happen again, Hriciga said.

DuPont has used modeling tools to address packaging problems for more than 20 years. The company traditionally ran the programs in-house and shared results with customers, but it’s now offering more and more of them online, she said.

For example, DuPont customers can use online applications to evaluate sealants and tie resins, she said.

Along with its development programs, DuPont used Pack Expo to highlight the company’s focus on global challenges, namely food safety and shortages, increasing energy demand, and the need to keep people and the environment safe.

“It’s vital for people around the world to be healthier and safer,” she said. “We think we have some strong reasons to focus on delivering that.”

DuPont has a hand in many areas, including chemistry, material science and biology, so it can quickly put people in different functions together to come up with innovations and solutions, she said.

Tackling a major challenge like feeding the world requires focusing on every aspect of the issue, from seeding planting to packaging, she said.

In DuPont’s case, that includes developing disease-resistant strains of grain, developing food ingredients that make people healthier – like salmon that have been fed Omega 3 oils to give their meat more protein – and working with local value chains to ensure that food can make it market without spoiling, she said.


Comments

DuPont invests in packaging development lab

Published: November 30, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Investment firm specializes in emerging polymer firms in Ohio

August 21, 2014 3:20 pm ET

A plastics market veteran is working with an investment firm and a research foundation to help commercialize polymer technology in the Buckeye State.    More

Image

Bayer, SCAC partner on water reuse project

August 21, 2014 12:48 pm ET

Bayer MaterialScience (BMS) and Shanghai Chlor-Alkali Chemical Co. Ltd. (SCAC) have entered into a preliminary agreement for the reuse of waste water ...    More

Image

Report predicts growth for flexible packaging

August 21, 2014 12:34 pm ET

Flexible packaging in the United States grew last year and is expected to continue to grow this year, according to a new report by the Flexible...    More

Image

Milacron commits $30 million to investment in India

August 20, 2014 5:42 pm ET

MUMBAI (Updated) — Cincinnati-based Milacron LLC plans to invest $30 million over the next three years in India. The investments will double...    More

Image

Enor expanding in S.C., moving toy production to U.S. from China

August 20, 2014 4:01 pm ET

Wal-Mart Stores Inc. has convinced toy producer Enor Corp. to expand U.S. production at the expense of sourcing from China.    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report analyzes economic and market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as growth strategies being implemented by thermoformed packaging companies.

Learn more

Pipe, Profile & Tubing Extrusion in North America 2014

U.S. demand for extruded plastics is expected to grow by 3 percent in 2014, with PVC remaining the largest segment.

Plastic pipe will post the strongest gains through 2018, continuing to take market share from competing materials in a range of markets.

Our latest market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Learn more

2014 Injection Molding Industry Report

GROWTH, OPPORTUNITY IN SIGHT FOR INJECTION MOLDERS IN 2014

In the wake of the economic turbulence earlier in this decade, molders today find themselves in much better shape. Molders are gaining a competitive advantage by investing in people, equipment and seeking inroads into new markets on a global scale.

Growth in the injection molding industry is going to be driven by low financing costs and a continued move to reshore some business.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events