Nylon 12 shortage ending, Evonik ready to resume CDT production

By Frank Esposito
Senior Staff Reporter

Published: December 4, 2012 6:00 am ET

Related to this story

Topics Automotive, Materials, Suppliers

ESSEN, GERMANY (Dec. 4, 3 p.m. ET) — Evonik Industries AG has completed repairs to its nylon 12 feedstock plant in Marl, Germany — less than eight months after a fatal explosion and fire there affected global supplies of nylon 12 resin.

The district government in Munster, Germany, has issued an operating permit for the site, officials with Essen-based Evonik announced on Dec. 4. Repair work at the site was completed by the end of November.

Production of nylon 12 feedstock cyclododecatriene (CDT) should resume by the end of December. Shipments of nylon 12 resin made from CDT produced in Marl are expected to go out in January.

A fire and explosion at the plant on March 31 resulted in the deaths of two workers. The explosion was caused by an overdosage of a catalyst used to make CDT, according to an independent investigation commissioned by Evonik. An investigation by the Essen attorney general’s office remains ongoing.

Evonik also implemented additional safety measures at the plant that had been recommended by an independent institute hired by the firm after the accident.

The accident led to severe tightness of CDT, causing companies throughout the automotive supply chain to scramble to find replacement materials. Nylon 12 is used extensively in automotive fuel lines and braking systems.

Evonik has annual sales of almost $19 billion. The firm employs more than 33,000 worldwide.


Comments

Nylon 12 shortage ending, Evonik ready to resume CDT production

By Frank Esposito
Senior Staff Reporter

Published: December 4, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Bain buying TI Automotive

January 27, 2015 8:49 am ET

After months of speculation, Auburn Hills, Mich.-based TI Automotive Ltd. entered into an agreement Tuesday to be acquired by private equity firm...    More

Image

Auto industry on the hunt for new lightweight materials

January 26, 2015 4:03 pm ET

The auto industry is focusing on lightweighting, and this is igniting a race to find new materials that can meet ever-changing performance needs of...    More

Image

Material Insights: PP production issues, preparing for NPE

January 26, 2015 1:38 pm ET

Production problems in Texas add more complication for polypropylene, Entek has new equipment ready to show compounders at NPE and we take a look...    More

Image

Continental builds low-emission interior trim factory in China

January 26, 2015 12:33 pm ET

Benecke-Kaliko AG is making the largest investment in its history to build an environmentally friendly auto interior trim plant in China, prompted by ...    More

Image

J6 Polymers to buy Stepan unit

January 26, 2015 12:22 pm ET

NORTHFIELD, ILL. — Stepan Co. plans to sell its specialty polyurethanes systems business to J6 Polymers LLC in a cash deal.    More

Market Reports

Plastics in Automotive: Innovation & Emerging Trends

This special report newly released by PN and sponsored by The Conair Group examines current trends in the use of plastics in automotive, materials innovations and the changing landscape. It includes a review of legislative/regulatory activity impacting vehicle development and lightweighting, market opportunities & challenges for mold and toolmakers, innovative design strategies being implemented by major OEMs and suppliers, as well as a review of key indicators in Canada, Mexico, Brazil and China.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molding Market Analysis & Processor Rankings

Plastics News BUNDLED package contains our in-depth Market Analysis of the Injection Molding segment. You will gain keen insight on current trends and our economic outlook.

As a BONUS this includes PN's updated 2014 database of North American Injection Molders RANKED by sales volume. Sort, merge, mail & prospect by end market, materials processed, region, # of plants and more.

Learn more

Upcoming Plastics News Events

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events