Nylon 12 shortage ending, Evonik ready to resume CDT production

By Frank Esposito
Senior Staff Reporter

Published: December 4, 2012 6:00 am ET

Related to this story

Topics Automotive, Materials, Suppliers

ESSEN, GERMANY (Dec. 4, 3 p.m. ET) — Evonik Industries AG has completed repairs to its nylon 12 feedstock plant in Marl, Germany — less than eight months after a fatal explosion and fire there affected global supplies of nylon 12 resin.

The district government in Munster, Germany, has issued an operating permit for the site, officials with Essen-based Evonik announced on Dec. 4. Repair work at the site was completed by the end of November.

Production of nylon 12 feedstock cyclododecatriene (CDT) should resume by the end of December. Shipments of nylon 12 resin made from CDT produced in Marl are expected to go out in January.

A fire and explosion at the plant on March 31 resulted in the deaths of two workers. The explosion was caused by an overdosage of a catalyst used to make CDT, according to an independent investigation commissioned by Evonik. An investigation by the Essen attorney general’s office remains ongoing.

Evonik also implemented additional safety measures at the plant that had been recommended by an independent institute hired by the firm after the accident.

The accident led to severe tightness of CDT, causing companies throughout the automotive supply chain to scramble to find replacement materials. Nylon 12 is used extensively in automotive fuel lines and braking systems.

Evonik has annual sales of almost $19 billion. The firm employs more than 33,000 worldwide.


Comments

Nylon 12 shortage ending, Evonik ready to resume CDT production

By Frank Esposito
Senior Staff Reporter

Published: December 4, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Canadian mold maker Thibault adding to new operation in Mexico

August 27, 2014 3:19 pm ET

Canadian mold maker I Thibault Inc has purchased an established Mexican company, Tecnimoldes SA de CV, for a seven-figure-dollar-sum and renamed it...    More

Image

Design, materials, engineering finding a faster way forward

August 27, 2014 1:50 pm ET

Engineering and design specialists at Altair Thinklabs and Eastman Chemical Co. have developed prototypes that would not just help Paralympics...    More

Image

Design Stories: Young designers showing the way in adaptive design

August 27, 2014 12:12 pm ET

Amanda Bolton, then 19, decided to change her major at the University of Cincinnati from fine arts to industrial design, creating products for people ...    More

Image

Sony entering recycled PC market

August 27, 2014 11:08 am ET

Consumer electronics giant Sony Corp. is getting into a sideline of selling recycled resins.    More

Image

PolyOne expands special effects offerings for PET

August 27, 2014 11:03 am ET

PolyOne Corp. has added a new line of shimmer and frost-effect colorants to its InVisio line of color services and solutions.    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report analyzes economic and market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as growth strategies being implemented by thermoformed packaging companies.

Learn more

Pipe, Profile & Tubing Extrusion in North America 2014

U.S. demand for extruded plastics is expected to grow by 3 percent in 2014, with PVC remaining the largest segment.

Plastic pipe will post the strongest gains through 2018, continuing to take market share from competing materials in a range of markets.

Our latest market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Learn more

2014 Injection Molding Industry Report

GROWTH, OPPORTUNITY IN SIGHT FOR INJECTION MOLDERS IN 2014

In the wake of the economic turbulence earlier in this decade, molders today find themselves in much better shape. Molders are gaining a competitive advantage by investing in people, equipment and seeking inroads into new markets on a global scale.

Growth in the injection molding industry is going to be driven by low financing costs and a continued move to reshore some business.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events