China car makers, suppliers form lightweight alliance

By Steve Toloken
News Editor / International

Published: December 5, 2012 6:00 am ET
Updated: January 3, 2013 6:23 am ET

Related to this story

Topics Automotive, Sustainability, Materials, Suppliers

CANGZHOU, CHINA (Dec. 5, 3:05 p.m. ET) — A group of global resin suppliers and Chinese automobile companies have formed a technology alliance to increase the amount of plastic used in the country’s cars, close the sizable gap with global auto companies and boost fuel efficiency of domestic vehicles.

Check out a PN video on the alliance.

The International Auto Lightweight Technology Alliance, announced Nov. 28 at a conference in Hebei province, includes global plastics raw material makers Rhodia SA, DSM NV and Arkema SA, along with large domestic Chinese car makers Chang’an Automobile Group Co. Ltd., Geely Holding Group Co. Ltd. and Beiqi Foton Motor Co. Ltd.

The alliance’s detailed agenda is still being worked out, but with Chinese economy cars using only about 50 kilograms of plastic parts on average, compared with 130 to 180 kilograms per vehicle in the United States, Western Europe and Japan, the participants see a lot of opportunities.

Chinese car makers use a higher percentage of metal components in their cars, alliance members said, and those heavier parts in turn make the cars less fuel efficient and potentially more polluting.

Members of the group acknowledge they have some challenges ahead of them, however, including recruiting more Tier 1 automotive components makers, who are not present in large numbers among the more than 20 founding companies and organizations.

The alliance is being organized by the Shanghai-based Sino-European Union Chemical Manufacturers Association, and its Auto Plastic and Innovative Materials Committee, which will provide administrative support.

The alliance wants to bring together six key groups in China’s auto industry — the car makers, the auto parts and components manufacturers, materials suppliers, government agencies, associations and universities, said Cao Du, chairman of the alliance and vice president of the Chang’an Auto Global R&D Center, a unit of major Chinese auto maker Chang’an Automobile Group Co. Ltd.

In particular, he said auto makers and materials suppliers in China don’t know much about each other’s capabilities and needs.

Cao is also vice chairman of the APIMC, and he spoke in an interview at the 6th International Auto Plastics and Innovative Materials Development Forum, held Nov. 28-29 in Cangzhou. APIMC organized the conference.

APIMC Chairman Jean-Claude Steinmetz, vice president of automotive for French resin supplier Rhodia SA, said the alliance can initially identify a handful of key demonstration projects to focus on that would involve Chinese car makers, Tier 1 firms and raw materials suppliers.

“Out of the discussion the last two days, we really have to pinpoint down the key deliverables for the next six months on definite projects,” he said in an interview at the forum. “The process should be started and well engaged in six months.”


Comments

China car makers, suppliers form lightweight alliance

By Steve Toloken
News Editor / International

Published: December 5, 2012 6:00 am ET
Updated: January 3, 2013 6:23 am ET

Post Your Comments


Back to story


More stories

Image

2014 sees modest sales increase, but profit decrease, for Dow Chemical

January 29, 2015 4:20 pm ET

UPDATED — Dow Chemical Co. delivered modest sales growth in 2014, but the firm's profit took a tumble.    More

Image

Report: Brands are falling short on packaging sustainability

January 29, 2015 5:19 pm ET

Packaging in general, and plastic packaging in particular, has a long way to go in terms of recycling, according to a pair of environmental groups.    More

Image

Resin prices continuing to tumble

January 29, 2015 2:24 pm ET

The ongoing slide in crude oil prices is taking commodity resin prices down as well.    More

Image

Lund adds to aftermarket auto products portfolio with buy of Bushwacker

January 29, 2015 2:49 pm ET

Lund International Inc. has expanded its portfolio of plastic aftermarket vehicle accessories by acquiring Bushwacker Inc.    More

Image

Materials firms look for stock rebound

January 29, 2015 1:52 pm ET

DuPont Co., A. Schulman Inc. and Rogers Corp. thrived amid the stock market chaos of 2014, but the other 12 publicly held materials firms tracked by P...    More

Market Reports

Plastics in Automotive: Innovation & Emerging Trends

This special report newly released by PN and sponsored by The Conair Group examines current trends in the use of plastics in automotive, materials innovations and the changing landscape. It includes a review of legislative/regulatory activity impacting vehicle development and lightweighting, market opportunities & challenges for mold and toolmakers, innovative design strategies being implemented by major OEMs and suppliers, as well as a review of key indicators in Canada, Mexico, Brazil and China.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molding Market Analysis & Processor Rankings

Plastics News BUNDLED package contains our in-depth Market Analysis of the Injection Molding segment. You will gain keen insight on current trends and our economic outlook.

As a BONUS this includes PN's updated 2014 database of North American Injection Molders RANKED by sales volume. Sort, merge, mail & prospect by end market, materials processed, region, # of plants and more.

Learn more

Upcoming Plastics News Events

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events