China car makers, suppliers form lightweight alliance

By Steve Toloken
Staff Reporter / Asia Bureau Chief

Published: December 5, 2012 6:00 am ET
Updated: January 3, 2013 6:23 am ET

Related to this story

Topics Materials, Suppliers, Sustainability, Automotive

CANGZHOU, CHINA (Dec. 5, 3:05 p.m. ET) — A group of global resin suppliers and Chinese automobile companies have formed a technology alliance to increase the amount of plastic used in the country’s cars, close the sizable gap with global auto companies and boost fuel efficiency of domestic vehicles.

Check out a PN video on the alliance.

The International Auto Lightweight Technology Alliance, announced Nov. 28 at a conference in Hebei province, includes global plastics raw material makers Rhodia SA, DSM NV and Arkema SA, along with large domestic Chinese car makers Chang’an Automobile Group Co. Ltd., Geely Holding Group Co. Ltd. and Beiqi Foton Motor Co. Ltd.

The alliance’s detailed agenda is still being worked out, but with Chinese economy cars using only about 50 kilograms of plastic parts on average, compared with 130 to 180 kilograms per vehicle in the United States, Western Europe and Japan, the participants see a lot of opportunities.

Chinese car makers use a higher percentage of metal components in their cars, alliance members said, and those heavier parts in turn make the cars less fuel efficient and potentially more polluting.

Members of the group acknowledge they have some challenges ahead of them, however, including recruiting more Tier 1 automotive components makers, who are not present in large numbers among the more than 20 founding companies and organizations.

The alliance is being organized by the Shanghai-based Sino-European Union Chemical Manufacturers Association, and its Auto Plastic and Innovative Materials Committee, which will provide administrative support.

The alliance wants to bring together six key groups in China’s auto industry — the car makers, the auto parts and components manufacturers, materials suppliers, government agencies, associations and universities, said Cao Du, chairman of the alliance and vice president of the Chang’an Auto Global R&D Center, a unit of major Chinese auto maker Chang’an Automobile Group Co. Ltd.

In particular, he said auto makers and materials suppliers in China don’t know much about each other’s capabilities and needs.

Cao is also vice chairman of the APIMC, and he spoke in an interview at the 6th International Auto Plastics and Innovative Materials Development Forum, held Nov. 28-29 in Cangzhou. APIMC organized the conference.

APIMC Chairman Jean-Claude Steinmetz, vice president of automotive for French resin supplier Rhodia SA, said the alliance can initially identify a handful of key demonstration projects to focus on that would involve Chinese car makers, Tier 1 firms and raw materials suppliers.

“Out of the discussion the last two days, we really have to pinpoint down the key deliverables for the next six months on definite projects,” he said in an interview at the forum. “The process should be started and well engaged in six months.”


Comments

China car makers, suppliers form lightweight alliance

By Steve Toloken
Staff Reporter / Asia Bureau Chief

Published: December 5, 2012 6:00 am ET
Updated: January 3, 2013 6:23 am ET

Post Your Comments


Back to story


More stories

Image

Celanese buys conductive polymer supplier

October 21, 2014 4:31 pm ET

Materials firm Celanese Corp. has acquired most of the assets of conductive polymers maker Cool Polymers Inc. for an undisclosed price.    More

Image

Asia continues driving sales for Engel

October 21, 2014 2:42 pm ET

The number seven seems to be special for European plastics machinery makers at the moment — injection press giant Engel Holding GmbH said Oct....    More

Image

BASF targets coffee and automotive connoisseurs with new resin grades

October 21, 2014 2:07 pm ET

BASF SE is using polybutylene terephthalate (PBT), which is normally used to manufacture high-end electronics, in a food consumer packaging product.    More

Image

Plastic particles showing up in Germany's Lake Constance

October 21, 2014 1:16 pm ET

While Fakuma 2014 exhibitors and visitors occupied themselves with topics like molding of micro-sized plastic parts during the show, the presence of...    More

Image

Bioplastics, design join forces for SOMA

October 21, 2014 11:33 am ET

A polylactic acid made by Germany's Fraunhofer UMSICHT is a key part of the Soma home water filtration system, which its developers call the “fi...    More

Market Reports

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 million dollar plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our analysts provide insight on business trends, foreign investment, top end markets and plastics processing activity. The report also provides important data on exports, production, employment and value of plastics products manufactured.

Learn more

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events