China car makers, suppliers form lightweight alliance

By Steve Toloken
Staff Reporter / Asia Bureau Chief

Published: December 5, 2012 6:00 am ET
Updated: January 3, 2013 6:23 am ET

Related to this story

Topics Materials, Suppliers, Sustainability, Automotive

CANGZHOU, CHINA (Dec. 5, 3:05 p.m. ET) — A group of global resin suppliers and Chinese automobile companies have formed a technology alliance to increase the amount of plastic used in the country’s cars, close the sizable gap with global auto companies and boost fuel efficiency of domestic vehicles.

Check out a PN video on the alliance.

The International Auto Lightweight Technology Alliance, announced Nov. 28 at a conference in Hebei province, includes global plastics raw material makers Rhodia SA, DSM NV and Arkema SA, along with large domestic Chinese car makers Chang’an Automobile Group Co. Ltd., Geely Holding Group Co. Ltd. and Beiqi Foton Motor Co. Ltd.

The alliance’s detailed agenda is still being worked out, but with Chinese economy cars using only about 50 kilograms of plastic parts on average, compared with 130 to 180 kilograms per vehicle in the United States, Western Europe and Japan, the participants see a lot of opportunities.

Chinese car makers use a higher percentage of metal components in their cars, alliance members said, and those heavier parts in turn make the cars less fuel efficient and potentially more polluting.

Members of the group acknowledge they have some challenges ahead of them, however, including recruiting more Tier 1 automotive components makers, who are not present in large numbers among the more than 20 founding companies and organizations.

The alliance is being organized by the Shanghai-based Sino-European Union Chemical Manufacturers Association, and its Auto Plastic and Innovative Materials Committee, which will provide administrative support.

The alliance wants to bring together six key groups in China’s auto industry — the car makers, the auto parts and components manufacturers, materials suppliers, government agencies, associations and universities, said Cao Du, chairman of the alliance and vice president of the Chang’an Auto Global R&D Center, a unit of major Chinese auto maker Chang’an Automobile Group Co. Ltd.

In particular, he said auto makers and materials suppliers in China don’t know much about each other’s capabilities and needs.

Cao is also vice chairman of the APIMC, and he spoke in an interview at the 6th International Auto Plastics and Innovative Materials Development Forum, held Nov. 28-29 in Cangzhou. APIMC organized the conference.

APIMC Chairman Jean-Claude Steinmetz, vice president of automotive for French resin supplier Rhodia SA, said the alliance can initially identify a handful of key demonstration projects to focus on that would involve Chinese car makers, Tier 1 firms and raw materials suppliers.

“Out of the discussion the last two days, we really have to pinpoint down the key deliverables for the next six months on definite projects,” he said in an interview at the forum. “The process should be started and well engaged in six months.”


Comments

China car makers, suppliers form lightweight alliance

By Steve Toloken
Staff Reporter / Asia Bureau Chief

Published: December 5, 2012 6:00 am ET
Updated: January 3, 2013 6:23 am ET

Post Your Comments


Back to story


More stories

Image

North American robot sales set record

July 30, 2014 4:46 pm ET

The North American robotics sector is off to its fastest start ever, shattering last year's first-half record, with a first-half 2014 of 14,135...    More

Image

DC banning PS foam containers

July 30, 2014 2:34 pm ET

Washington D.C. Mayor Vincent Gra signed into law on July 29 a bill that will ban polystyrene foam food and drink containers from the District.    More

Image

Sainsbury, Schoeller Allibert to recycle food handling crates

July 30, 2014 1:37 pm ET

British retail group Sainsbury's has contracted Dutch recycler Schoeller Allibert BV to reprocess all of its old food crates back into food-grade...    More

Image

Styrolution will open new production late 2014

July 30, 2014 12:54 pm ET

Germany-based styrenic materials group, Styrolution, has announced it is expanding its facility in Ludwigshafen, Germany.    More

Image

UMass Lowell hosts collaborative research meeting for future projects

July 30, 2014 11:54 am ET

The University of Massachusetts at Lowell recently hosted a seminar, which was billed as a collaborative research meeting between Dow Chemical Co., th...    More

Market Reports

Pipe, Profile & Tubing Extrusion in North America 2014

U.S. demand for extruded plastics is expected to grow by 3 percent in 2014, with PVC remaining the largest segment.

Plastic pipe will post the strongest gains through 2018, continuing to take market share from competing materials in a range of markets.

Our latest market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Learn more

2014 Injection Molding Industry Report

GROWTH, OPPORTUNITY IN SIGHT FOR INJECTION MOLDERS IN 2014

In the wake of the economic turbulence earlier in this decade, molders today find themselves in much better shape. Molders are gaining a competitive advantage by investing in people, equipment and seeking inroads into new markets on a global scale.

Growth in the injection molding industry is going to be driven by low financing costs and a continued move to reshore some business.

Learn more

Shale Gas Market - Analysis of North American Region

This report highlights the impact of shale-based natural gas on the North American plastics market and features an in-depth analysis of production trends in the United States during 2013 and a forecast for 2014 and beyond.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events