U.S. demand rising for post-consumer plastic

Published: December 5, 2012 6:00 am ET
Updated: January 3, 2013 6:26 am ET

Related to this story

Topics Sustainability, Recycling

CLEVELAND (Dec. 5, 9:15 a.m. ET) — Demand for U.S. post-consumer recycled plastic is expected to rise 6.5 percent per year to nearly 3.5 billion pounds in 2016, according to a recent study.

The increase – nearly 1 billion more pounds than last year’s demand – is attributed to growing emphasis on sustainability among packaging and consumer product manufacturers, improved processing and sorting technologies that can handle more plastic resins, and improved collection infrastructures, according to the “Recycled Plastics” study.

Freedonia Group Inc., a Cleveland-based industry market research firm, conducted the study.

Support by federal, state and local governments for recycling efforts will help boost recycled plastic collection, processing and demand, according to the study.

But the overall U.S. plastic recycling rate will remain relatively low through 2016, with less than 7 percent of total plastic demand. Some of the challenges include minimal recycling in construction products, motor vehicles and packaging film.

Packaging will continue to lead the recycled plastic market in 2016, the study said, while plastic bottles will account for more than half of all plastic collected. Last year, PET and high density polyethylene were the two leading resins used in recycled plastic products, accounting for more than 70 percent of demand.

PET will see “average gains” in demand, the study said, due to increased recycled content in bottles and thermoformed containers. HDPE will see fewer increases and will limit the availability of recycled resin.

Polystyrene, nylon and other smaller volume resins will see rapid growth, due to increased collection of products such as consumer electronics, carpet and plastic foam.


Comments

U.S. demand rising for post-consumer plastic

Published: December 5, 2012 6:00 am ET
Updated: January 3, 2013 6:26 am ET

Post Your Comments


Back to story


More stories

Image

SPI hopes to build on EPS recycling

November 26, 2014 6:00 am ET

Successfully recycling expanded polystyrene can be a challenge, there's no doubt about that. EPS, however, has value, is in demand and deserves to be ...    More

Image

Pan-European plastics recycling show scheduled for 2015

November 26, 2014 6:00 am ET

Europe is to get its first pan-European exhibition and conference aimed at the region's plastics recycling industry next year.    More

Image

Plastics News Now: Recycling machine dispenses food for stray dogs, cats

November 26, 2014 6:00 am ET

A PET bottle recycling vending machine is providing food and water for stray dogs and cats, a plastic tire is looking to replace rubber pneumatic...    More

Image

World Plastics Council takes on sustainbility for its initial priorities

November 25, 2014 9:51 am ET

The recently formed World Plastics Council (WPC) has set marine debris and post-consumer recycling and energy recover as its initial top priorities.    More

Image

AMA Plastics adds presses, changes management structure

November 24, 2014 3:57 pm ET

AMA Plastics Inc. has strengthened its management structure, received recognition for entrepreneurship, achieved quality improvements and added three ...    More

Market Reports

Plastics in Brazil - State of the Industry Report

This in-depth report examines the Brazilian plastics industry from a historical and geographical context. Our analysts provide insight on economic trends and forecasts, growing manufacturing sectors that utilize plastics, private investment opportunities, market environment challenges, and innovations in R&D.

Data tables and charts on producer prices, trade, plastics production and end market indicators is also included.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molders Market Report & Ranking 2014

This special package contains our 132-page 2014 Market Report on the Injection Molding segment and our exclusive 2014 RANKINGS database of 500+ Injection Molders for a discounted package price.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

October 27, 2015 - October 29, 2015Plastics Financial Summit - New York - 2015

More Events