China car makers, suppliers form lightweight alliance

By Steve Toloken
Staff Reporter / Asia Bureau Chief

Published: December 5, 2012 6:00 am ET
Updated: January 3, 2013 6:23 am ET

Related to this story

Topics Materials, Suppliers, Sustainability, Automotive

CANGZHOU, CHINA (Dec. 5, 3:05 p.m. ET) — A group of global resin suppliers and Chinese automobile companies have formed a technology alliance to increase the amount of plastic used in the country’s cars, close the sizable gap with global auto companies and boost fuel efficiency of domestic vehicles.

Check out a PN video on the alliance.

The International Auto Lightweight Technology Alliance, announced Nov. 28 at a conference in Hebei province, includes global plastics raw material makers Rhodia SA, DSM NV and Arkema SA, along with large domestic Chinese car makers Chang’an Automobile Group Co. Ltd., Geely Holding Group Co. Ltd. and Beiqi Foton Motor Co. Ltd.

The alliance’s detailed agenda is still being worked out, but with Chinese economy cars using only about 50 kilograms of plastic parts on average, compared with 130 to 180 kilograms per vehicle in the United States, Western Europe and Japan, the participants see a lot of opportunities.

Chinese car makers use a higher percentage of metal components in their cars, alliance members said, and those heavier parts in turn make the cars less fuel efficient and potentially more polluting.

Members of the group acknowledge they have some challenges ahead of them, however, including recruiting more Tier 1 automotive components makers, who are not present in large numbers among the more than 20 founding companies and organizations.

The alliance is being organized by the Shanghai-based Sino-European Union Chemical Manufacturers Association, and its Auto Plastic and Innovative Materials Committee, which will provide administrative support.

The alliance wants to bring together six key groups in China’s auto industry — the car makers, the auto parts and components manufacturers, materials suppliers, government agencies, associations and universities, said Cao Du, chairman of the alliance and vice president of the Chang’an Auto Global R&D Center, a unit of major Chinese auto maker Chang’an Automobile Group Co. Ltd.

In particular, he said auto makers and materials suppliers in China don’t know much about each other’s capabilities and needs.

Cao is also vice chairman of the APIMC, and he spoke in an interview at the 6th International Auto Plastics and Innovative Materials Development Forum, held Nov. 28-29 in Cangzhou. APIMC organized the conference.

APIMC Chairman Jean-Claude Steinmetz, vice president of automotive for French resin supplier Rhodia SA, said the alliance can initially identify a handful of key demonstration projects to focus on that would involve Chinese car makers, Tier 1 firms and raw materials suppliers.

“Out of the discussion the last two days, we really have to pinpoint down the key deliverables for the next six months on definite projects,” he said in an interview at the forum. “The process should be started and well engaged in six months.”


Comments

China car makers, suppliers form lightweight alliance

By Steve Toloken
Staff Reporter / Asia Bureau Chief

Published: December 5, 2012 6:00 am ET
Updated: January 3, 2013 6:23 am ET

Post Your Comments


Back to story


More stories

Image

Gear pump maker Witte expands in Germany and USA

July 25, 2014 2:15 pm ET

Witte Pumps & Technology GmbH, the German maker of gear pumps for extrusion, has moved into a new headquarters factory in the Hamburg area, and the...    More

Image

Austrian mold maker seeking North American manufacturing partner

July 25, 2014 1:49 pm ET

An Austrian mold maker is looking for a manufacturing location in North America.    More

Image

DuPont resins help take Nike golf balls 'Fore!'ward

July 25, 2014 1:07 pm ET

It may be difficult to imagine just how much science, not to mention rubber and plastic components, go into a golf ball. But global giant DuPont Co....    More

Image

Bioplastics maker wins government funding

July 25, 2014 12:13 pm ET

Canadian bioplastics maker Solegear Bioplastics Inc. has won $1.6 million in funding from the government-sponsored Western Innovation Initiative...    More

Image

Tooling Technology has new private equity owner

July 25, 2014 11:55 am ET

New York private equity firm GenNx360 Capital Partners has partnered with management to buy Tooling Technology Holdings LLC, a diversified Ohio-based ...    More

Market Reports

Plastics Recyclers Data Report & Directory

This exclusive MS Excel database contains all the companies from Plastics News' ranking of top North American Recyclers and Brokers by reprocessed volume and also includes a directory with materials processes, services offered and company contact information. Data is based on primary research by PN editorial staff.

Learn more

2014 Injection Molding Industry Report

GROWTH, OPPORTUNITY IN SIGHT FOR INJECTION MOLDERS IN 2014

In the wake of the economic turbulence earlier in this decade, molders today find themselves in much better shape. Molders are gaining a competitive advantage by investing in people, equipment and seeking inroads into new markets on a global scale.

Growth in the injection molding industry is going to be driven by low financing costs and a continued move to reshore some business.

Learn more

Shale Gas Market - Analysis of North American Region

This report highlights the impact of shale-based natural gas on the North American plastics market and features an in-depth analysis of production trends in the United States during 2013 and a forecast for 2014 and beyond.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events