Eovations to open siding, trim site

By Frank Antosiewicz
Correspondent

Published: December 7, 2012 6:00 am ET
Updated: January 3, 2013 6:54 am ET

A circular saw cuts into an Eovations-manufactured profile. The company says that common woodworking tools can be used on the material. (Eovations LLC photo)

Related to this story

Topics Consumer Products, Materials, Film & Sheet, Suppliers

SELMA, ALA. (Dec. 7, 2:35 p.m. ET) — Eovations LLC, which is developing a thermoplastic mineral composite material that can be handled much like wood, is opening a new production plant in Alabama.

“In Selma, Ala., we will be launching a siding and trim line with our very own technology,” said Dick McBride, operations general manager for Eovations’ parent, Universal Forest Products Inc.

The material, which can be worked with common woodworking tools, is being developed by Eovations using an extruded oriented process in which a fully fiberized thermoplastic mineral composite is created. Durability and strength are among its key assets and it could be used in challenging environments, McBride said in a telephone interview.

The new production area in Selma will occupy about 60,000 square feet. It has a small crew of about 10 workers preparing the site, but expects to add another 10-15 employees as it starts up. McBride said the first production line will be ready by the first of the year and that it will ramp up in the first quarter of 2013.

He said the Selma footprint is favorable for continued growth and will allow for multiple lines in the future.

Eovations opened a research and development center dedicated to developing its technology in Bay Center, Mich., 18 months ago. The facility has 15 employees, a production line and laboratory equipment. It continues to look for new uses for the composite.

The material can be used as a replacement for wood, wood-plastic composites, plastic and metal, according to the company. Eovations is also planning to license the technology to others for use in commercialization of products and components. McBride said that company officials are talking with a variety of door and window manufacturers, and other companies about other uses.

The company said that the material can be processed using a variety of polymer and mineral raw materials and that it allows properties such as density to be controlled for different products. A plus is that it can be machined, milled, cut and drilled much like wood. It also works with conventional nails, screws and staples.

Details of the siding and trim product launch are not ready for release, but it will be a controlled launch, he said.

“We’ve done some test installments and it is showing unbelievable durability. It has performed very well and goes up similar to wood lap siding,” said McBride. But, he added that the company sees it as a higher-end product that can compete with lap-type siding.

The initial plan is to provide three different color products at the start, he said. Those will be named at a later date and more colors will be added as the market develops

Universal Forest Products, based in Grand Rapids, Mich., is the majority stakeholder in Eovations.


Comments

Eovations to open siding, trim site

By Frank Antosiewicz
Correspondent

Published: December 7, 2012 6:00 am ET
Updated: January 3, 2013 6:54 am ET

Post Your Comments


Back to story


More stories

Image

Almost half of mid-market firms say they are looking to buy competitors

March 2, 2015 3:52 pm ET

There are steps that plastics business owners can take to keep the mergers and acquisitions parade rolling into 2015.    More

Image

P&G adding label to help guide consumers in recycling

March 2, 2015 3:29 pm ET

Procter & Gamble Co. will help prompt consumers to recycle rigid packaging by joining the Sustainable Packaging Coalition's How2Recycle Label program.    More

Image

Lower oil prices will continue to impact PE, PP resin pricing

March 2, 2015 2:05 pm ET

Lower oil prices will continue to affect North American markets for polyethylene and polypropylene resin in the months ahead.    More

Image

Toyota says Mirai fuel cell sedan represents a 'new start' for the carmaker

March 2, 2015 11:55 am ET

Toyota Motor Corp.'s most advanced vehicle, a car that runs on hydrogen and emits only water, has had an ironically low-tech birth and has an equally ...    More

Image

SPE CEO points to 'open-source' trends as sign of need to share information

March 2, 2015 11:44 am ET

Willem De Vos, the CEO of the Society of Plastics Engineers, took a Plastics News Executive Forum audience on a wild ride into the future.    More

Market Reports

Flexible Packaging Trends in North America

North America represents about 30 percent of the global consumption of flexible packaging. Annual growth in this region is forecast at 4 percent during the next 5 years.

For more insight on growth opportunities, drivers of growth and the outlook for 2015, download this report.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 billion plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our analysts provide insight on business trends, foreign investment, top end markets and plastics processing activity. The report also provides important data on exports, production, employment and value of plastics products manufactured.

Learn more

Upcoming Plastics News Events

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events