Eovations to open siding, trim site

By Frank Antosiewicz
Correspondent

Published: December 7, 2012 6:00 am ET
Updated: January 3, 2013 6:54 am ET

A circular saw cuts into an Eovations-manufactured profile. The company says that common woodworking tools can be used on the material. (Eovations LLC photo)

Related to this story

Topics Consumer Products, Materials, Film & Sheet, Suppliers

SELMA, ALA. (Dec. 7, 2:35 p.m. ET) — Eovations LLC, which is developing a thermoplastic mineral composite material that can be handled much like wood, is opening a new production plant in Alabama.

“In Selma, Ala., we will be launching a siding and trim line with our very own technology,” said Dick McBride, operations general manager for Eovations’ parent, Universal Forest Products Inc.

The material, which can be worked with common woodworking tools, is being developed by Eovations using an extruded oriented process in which a fully fiberized thermoplastic mineral composite is created. Durability and strength are among its key assets and it could be used in challenging environments, McBride said in a telephone interview.

The new production area in Selma will occupy about 60,000 square feet. It has a small crew of about 10 workers preparing the site, but expects to add another 10-15 employees as it starts up. McBride said the first production line will be ready by the first of the year and that it will ramp up in the first quarter of 2013.

He said the Selma footprint is favorable for continued growth and will allow for multiple lines in the future.

Eovations opened a research and development center dedicated to developing its technology in Bay Center, Mich., 18 months ago. The facility has 15 employees, a production line and laboratory equipment. It continues to look for new uses for the composite.

The material can be used as a replacement for wood, wood-plastic composites, plastic and metal, according to the company. Eovations is also planning to license the technology to others for use in commercialization of products and components. McBride said that company officials are talking with a variety of door and window manufacturers, and other companies about other uses.

The company said that the material can be processed using a variety of polymer and mineral raw materials and that it allows properties such as density to be controlled for different products. A plus is that it can be machined, milled, cut and drilled much like wood. It also works with conventional nails, screws and staples.

Details of the siding and trim product launch are not ready for release, but it will be a controlled launch, he said.

“We’ve done some test installments and it is showing unbelievable durability. It has performed very well and goes up similar to wood lap siding,” said McBride. But, he added that the company sees it as a higher-end product that can compete with lap-type siding.

The initial plan is to provide three different color products at the start, he said. Those will be named at a later date and more colors will be added as the market develops

Universal Forest Products, based in Grand Rapids, Mich., is the majority stakeholder in Eovations.


Comments

Eovations to open siding, trim site

By Frank Antosiewicz
Correspondent

Published: December 7, 2012 6:00 am ET
Updated: January 3, 2013 6:54 am ET

Post Your Comments


Back to story


More stories

Image

Bayer spinning off plastics business

September 18, 2014 8:49 am ET

Bayer AG will spin off its MaterialScience plastics group into a separate, publicly-traded company within the next 12 to 18 months.    More

Image

Study: 75 percent of Australia's ocean debris is plastic

September 18, 2014 7:48 pm ET

About 75 percent of the trash found in the waters off Australia's beaches is plastic, with most of that coming from local sources rather than sea-...    More

Image

Investor group wants DuPont to split in two

September 18, 2014 7:37 pm ET

Investment firm Trian Fund Management LP is calling for plastics and chemicals giant DuPont Co. to split itself into two firms, one of which would...    More

Image

P&G removing PE microbeads from its Crest brand toothpaste

September 18, 2014 1:57 pm ET

After months of prodding, Procter & Gamble Co., the makers of Crest brand toothpastes, say polyethlene microbeads will be completely removed from its ...    More

Image

Smartphone work adds 52 percent to sales for China's Eva Precision

September 18, 2014 4:37 pm ET

Growth in supplying the smartphone and automotive industries helped Chinese processor Eva Precision Holdings Ltd. push injection molding sales up 52 p...    More

Market Reports

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Shale Gas Market - Analysis of North American Region

This report highlights the impact of shale-based natural gas on the North American plastics market and features an in-depth analysis of production trends in the United States during 2013 and a forecast for 2014 and beyond.

Learn more

Thermoformed Packaging 2014 Market Review & Outlook – North America

This in-depth report analyzes economic and market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as growth strategies being implemented by thermoformed packaging companies.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events