Eovations to open siding, trim site

By Frank Antosiewicz
Correspondent

Published: December 7, 2012 6:00 am ET
Updated: January 3, 2013 6:54 am ET

A circular saw cuts into an Eovations-manufactured profile. The company says that common woodworking tools can be used on the material. (Eovations LLC photo)

Related to this story

Topics Materials, Suppliers, Consumer Products, Film & Sheet

SELMA, ALA. (Dec. 7, 2:35 p.m. ET) — Eovations LLC, which is developing a thermoplastic mineral composite material that can be handled much like wood, is opening a new production plant in Alabama.

“In Selma, Ala., we will be launching a siding and trim line with our very own technology,” said Dick McBride, operations general manager for Eovations’ parent, Universal Forest Products Inc.

The material, which can be worked with common woodworking tools, is being developed by Eovations using an extruded oriented process in which a fully fiberized thermoplastic mineral composite is created. Durability and strength are among its key assets and it could be used in challenging environments, McBride said in a telephone interview.

The new production area in Selma will occupy about 60,000 square feet. It has a small crew of about 10 workers preparing the site, but expects to add another 10-15 employees as it starts up. McBride said the first production line will be ready by the first of the year and that it will ramp up in the first quarter of 2013.

He said the Selma footprint is favorable for continued growth and will allow for multiple lines in the future.

Eovations opened a research and development center dedicated to developing its technology in Bay Center, Mich., 18 months ago. The facility has 15 employees, a production line and laboratory equipment. It continues to look for new uses for the composite.

The material can be used as a replacement for wood, wood-plastic composites, plastic and metal, according to the company. Eovations is also planning to license the technology to others for use in commercialization of products and components. McBride said that company officials are talking with a variety of door and window manufacturers, and other companies about other uses.

The company said that the material can be processed using a variety of polymer and mineral raw materials and that it allows properties such as density to be controlled for different products. A plus is that it can be machined, milled, cut and drilled much like wood. It also works with conventional nails, screws and staples.

Details of the siding and trim product launch are not ready for release, but it will be a controlled launch, he said.

“We’ve done some test installments and it is showing unbelievable durability. It has performed very well and goes up similar to wood lap siding,” said McBride. But, he added that the company sees it as a higher-end product that can compete with lap-type siding.

The initial plan is to provide three different color products at the start, he said. Those will be named at a later date and more colors will be added as the market develops

Universal Forest Products, based in Grand Rapids, Mich., is the majority stakeholder in Eovations.


Comments

Eovations to open siding, trim site

By Frank Antosiewicz
Correspondent

Published: December 7, 2012 6:00 am ET
Updated: January 3, 2013 6:54 am ET

Post Your Comments


Back to story


More stories

Image

Cascade Engineering founder Keller to step down as CEO

September 16, 2014 8:33 pm ET

Cascade Engineering Inc. is undergoing a transition as President Mark Miller will also add the role of CEO, replacing founder Fred Keller, who has...    More

Image

DuPont investing $100 million for more ethylene copolymer capacity

September 16, 2014 1:51 pm ET

Increased packaging demand is leading materials giant DuPont Co. to spend more than $100 million to increase capacity for ethylene copolymers at its...    More

Image

Heineken swapping out plastic for wood for its pallets in Mexico

September 16, 2014 4:35 pm ET

Dutch brewer Heineken NV is to replace all its wooden pallets in Mexico with a high impact-resistant plastic pallet, co-designed and produced by...    More

Image

Canadian, Mexican injection molders form auto supply joint venture

September 16, 2014 2:26 pm ET

A new automotive parts manufacturer will open in Querétaro, Mexico, through a joint venture between Canadian automotive supplier Papp Plastics and...    More

Image

NY packaging company aims for zero waste

September 16, 2014 1:36 pm ET

Plastic folding carton maker Diamond Packaging is no longer sending any manufacturing waste to landfills.    More

Market Reports

Shale Gas Market - Analysis of North American Region

This report highlights the impact of shale-based natural gas on the North American plastics market and features an in-depth analysis of production trends in the United States during 2013 and a forecast for 2014 and beyond.

Learn more

Thermoformed Packaging 2014 Market Review & Outlook – North America

This in-depth report analyzes economic and market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as growth strategies being implemented by thermoformed packaging companies.

Learn more

Pipe, Profile & Tubing Extrusion in North America 2014

U.S. demand for extruded plastics is expected to grow by 3 percent in 2014, with PVC remaining the largest segment.

Plastic pipe will post the strongest gains through 2018, continuing to take market share from competing materials in a range of markets.

Our latest market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events