MonoSol commercializes water-soluble pouch film

Published: December 7, 2012 6:00 am ET

Related to this story

Topics Packaging, Film & Sheet

CHICAGO (Dec. 7, 12 p.m. ET) — After several successful converting trials and a few small-scale product applications, water-soluble films company MonoSol LLC is ready to manufacture commercial quantities of its edible water-soluble Vivos film that can be made into food pouches on existing converting equipment.

“We have done enough scale-up so that we can now produce it on a commercial basis,” said Sumeet Kumar, senior manager of technical marketing for Monosol, which is based in Merrillville, Ind. “We could have a launch with a customer as early as 2013.”

The film — made from a proprietary blend of food-grade ingredients and plant-based materials — was hard launched at Packaging Expo in Chicago the last week in October after a soft launch earlier this year, said Kumar in a phone interview after Pack Expo.

The food pouches made from the Vivos film literally disappear as the pouch releases its content into hot or cold liquids used for cooking. The film “does not impart any taste or odor and can be consumed along with the food,” Kumar said.

The pouches are currently used on a small scale to package oatmeal, cocoa and some sweeteners.

Kumar said Monosol believes its Vivos Edible Delivery System for foods initially will be particularly appealing to “back of the kitchen operations of food-service companies and food manufacturing operations.”

“Right now, those companies have to open a bag, pre-measure the ingredient and deliver an exact dose” for mixing and batching operations, Kumar said. “Our pouches give you a very convenient product delivery system and are a very efficient way to make foods such as cocoa, hot chocolate, oatmeal and soups. It will reduce processing costs, processing time and improve the accuracy of the operation.”

Other potential applications include fruit drinks, instant teas and coffees, warm breakfast meals, drink powders and sticks, gravies, sauces, pastas, rice, seasonings, salts, vitamin fortifiers and workout supplements, he said.

“We were looking at where we could take our knowledge of water-soluble technology” for packaging products such as automatic dishwasher and laundry detergent and expand it in other market opportunities, Kumar said.

“We felt that foods made through portion control represented the right opportunity because it is a very efficient way to make foods and there is no wrapper to throw away,” he said. “It saves time, and you don’t have to throw the package away” because there is none after it is used. Kumar said.

Like anything new, Kumar said the challenge will be to explain the edible food delivery system to potential customers. But, as he points out, water-based polymers are in use today on chewing gums and as coatings for dietary supplements. “We’re not using anything that hasn’t been used for human consumption before.”

Still, Kumar said, “we are talking about a delivery system that does not exist anywhere in the world and we have to explain it to people because it is a big paradigm shift. But it also is a ready-made eco-friendly system for interested parties.”

“I would think that initially it will be a niche application, but then it could become broad-based,” said Kumar. “We see it taking a similar path to mono-doses in the laundry industry, which now have a 30-40 [percent] share of that market.”

The pouches were developed in partnership with Cloud Packaging Equipment, which manufactures horizontal form, fill, seal Hydroforma pouch packaging machines that can make 1,000 to 2,000 pouches per minute—which Cloud says is 10 times more pouches per minute than vertical pouch packaging machines.

However, the film can also be run on existing vertical form, fill, and seal equipment with slight modifications to control humidity to ensure proper sealing.

Monosol is part of Kuraray Holdings U.S.A. Inc., which is part of Japanese-based specialty chemical company Kuraray Co. Ltd.

Cloud Packaging, based in Des Plaines, Ill., is owned by Ryt-Way Industries LLC in Lakeville, Minn., a contract packager of dry food products such as ready-to-eat cereals, prepared meals, side dishes, beverages and sweeteners.


Comments

MonoSol commercializes water-soluble pouch film

Published: December 7, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Brown signs California's plastic bag ban into law

September 30, 2014 1:38 pm ET

Gov. Jerry Brown (D) made it official today: plastic bags are banned across the entire state of California.    More

Image

Welding equipment supplier Forward completes expansion

September 30, 2014 4:08 pm ET

Plastic welding equipment producer Forward Technology completed an expansion it predicts will help customers become more efficient and cut costs.    More

Image

Extreme Tool uses remote Michigan location to attract younger workers

September 30, 2014 3:47 pm ET

“I'm not saying there's anything wrong with being an old guy like me. But I do believe in the power of youth and reinvesting in training. The...    More

Image

Teens put a cap on watery ketchup

September 30, 2014 1:57 pm ET

Whether you spell it ketchup or catsup, use it on burgers or fries, or prefer Heinz or Hunt's, there is one universal problem for the ages: That...    More

Image

Toyoda Gosei pleads guilty, agrees to $26 million fine for price fixing

September 30, 2014 11:27 am ET

Toyoda Gosei Co. Ltd. has pleaded guilty and agreed to pay a $26 million fine for its alleged role in an international conspiracy to rig bids and fix ...    More

Market Reports

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 million dollar plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our industry analysis highlights macro industry trends and micro trends faced by companies that do business in Mexico. The report also provides key industry statistics and forecasts to anticipate future industry expansion.

Learn more

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Injection Molders Market Report & Ranking 2014

This special package contains our 132-page 2014 Market Report on the Injection Molding segment and our exclusive 2014 RANKINGS database of 500+ Injection Molders for a discounted package price.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events