MonoSol commercializes water-soluble pouch film

Published: December 7, 2012 6:00 am ET

Related to this story

Topics Packaging, Film & Sheet

CHICAGO (Dec. 7, 12 p.m. ET) — After several successful converting trials and a few small-scale product applications, water-soluble films company MonoSol LLC is ready to manufacture commercial quantities of its edible water-soluble Vivos film that can be made into food pouches on existing converting equipment.

“We have done enough scale-up so that we can now produce it on a commercial basis,” said Sumeet Kumar, senior manager of technical marketing for Monosol, which is based in Merrillville, Ind. “We could have a launch with a customer as early as 2013.”

The film — made from a proprietary blend of food-grade ingredients and plant-based materials — was hard launched at Packaging Expo in Chicago the last week in October after a soft launch earlier this year, said Kumar in a phone interview after Pack Expo.

The food pouches made from the Vivos film literally disappear as the pouch releases its content into hot or cold liquids used for cooking. The film “does not impart any taste or odor and can be consumed along with the food,” Kumar said.

The pouches are currently used on a small scale to package oatmeal, cocoa and some sweeteners.

Kumar said Monosol believes its Vivos Edible Delivery System for foods initially will be particularly appealing to “back of the kitchen operations of food-service companies and food manufacturing operations.”

“Right now, those companies have to open a bag, pre-measure the ingredient and deliver an exact dose” for mixing and batching operations, Kumar said. “Our pouches give you a very convenient product delivery system and are a very efficient way to make foods such as cocoa, hot chocolate, oatmeal and soups. It will reduce processing costs, processing time and improve the accuracy of the operation.”

Other potential applications include fruit drinks, instant teas and coffees, warm breakfast meals, drink powders and sticks, gravies, sauces, pastas, rice, seasonings, salts, vitamin fortifiers and workout supplements, he said.

“We were looking at where we could take our knowledge of water-soluble technology” for packaging products such as automatic dishwasher and laundry detergent and expand it in other market opportunities, Kumar said.

“We felt that foods made through portion control represented the right opportunity because it is a very efficient way to make foods and there is no wrapper to throw away,” he said. “It saves time, and you don’t have to throw the package away” because there is none after it is used. Kumar said.

Like anything new, Kumar said the challenge will be to explain the edible food delivery system to potential customers. But, as he points out, water-based polymers are in use today on chewing gums and as coatings for dietary supplements. “We’re not using anything that hasn’t been used for human consumption before.”

Still, Kumar said, “we are talking about a delivery system that does not exist anywhere in the world and we have to explain it to people because it is a big paradigm shift. But it also is a ready-made eco-friendly system for interested parties.”

“I would think that initially it will be a niche application, but then it could become broad-based,” said Kumar. “We see it taking a similar path to mono-doses in the laundry industry, which now have a 30-40 [percent] share of that market.”

The pouches were developed in partnership with Cloud Packaging Equipment, which manufactures horizontal form, fill, seal Hydroforma pouch packaging machines that can make 1,000 to 2,000 pouches per minute—which Cloud says is 10 times more pouches per minute than vertical pouch packaging machines.

However, the film can also be run on existing vertical form, fill, and seal equipment with slight modifications to control humidity to ensure proper sealing.

Monosol is part of Kuraray Holdings U.S.A. Inc., which is part of Japanese-based specialty chemical company Kuraray Co. Ltd.

Cloud Packaging, based in Des Plaines, Ill., is owned by Ryt-Way Industries LLC in Lakeville, Minn., a contract packager of dry food products such as ready-to-eat cereals, prepared meals, side dishes, beverages and sweeteners.


Comments

MonoSol commercializes water-soluble pouch film

Published: December 7, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Report: Brands are falling short on packaging sustainability

January 29, 2015 5:19 pm ET

Packaging in general, and plastic packaging in particular, has a long way to go in terms of recycling, according to a pair of environmental groups.    More

Image

Lund adds to aftermarket auto products portfolio with buy of Bushwacker

January 29, 2015 2:49 pm ET

Lund International Inc. has expanded its portfolio of plastic aftermarket vehicle accessories by acquiring Bushwacker Inc.    More

Image

Profit dips at Bemis Co. Inc.

January 29, 2015 2:04 pm ET

Profit dipped for Bemis Co. Inc. for all of 2014, but were up during the fourth quarter in what the company's leader called a “pivotal year....    More

Image

Plastics News Now: Losing weight with style, plastics in the Dragons' Den

January 29, 2015 6:00 am ET

A 19-year-old entrepreneur brings business to a U.K. injection molder after winning support on TV's Dragons' Den, auto suppliers combine...    More

Image

African equity fund invests in Kenya's General Plastics

January 28, 2015 4:24 pm ET

An African investment fund specializing in agriculture has invested in Kenyan packaging firm General Plastics Ltd. to provide funds to expand in the r...    More

Market Reports

Plastics in Automotive: Innovation & Emerging Trends

This special report newly released by PN and sponsored by The Conair Group examines current trends in the use of plastics in automotive, materials innovations and the changing landscape. It includes a review of legislative/regulatory activity impacting vehicle development and lightweighting, market opportunities & challenges for mold and toolmakers, innovative design strategies being implemented by major OEMs and suppliers, as well as a review of key indicators in Canada, Mexico, Brazil and China.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molding Market Analysis & Processor Rankings

Plastics News BUNDLED package contains our in-depth Market Analysis of the Injection Molding segment. You will gain keen insight on current trends and our economic outlook.

As a BONUS this includes PN's updated 2014 database of North American Injection Molders RANKED by sales volume. Sort, merge, mail & prospect by end market, materials processed, region, # of plants and more.

Learn more

Upcoming Plastics News Events

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events