MonoSol commercializes water-soluble pouch film

Published: December 7, 2012 6:00 am ET

Related to this story

Topics Packaging, Film & Sheet

CHICAGO (Dec. 7, 12 p.m. ET) — After several successful converting trials and a few small-scale product applications, water-soluble films company MonoSol LLC is ready to manufacture commercial quantities of its edible water-soluble Vivos film that can be made into food pouches on existing converting equipment.

“We have done enough scale-up so that we can now produce it on a commercial basis,” said Sumeet Kumar, senior manager of technical marketing for Monosol, which is based in Merrillville, Ind. “We could have a launch with a customer as early as 2013.”

The film — made from a proprietary blend of food-grade ingredients and plant-based materials — was hard launched at Packaging Expo in Chicago the last week in October after a soft launch earlier this year, said Kumar in a phone interview after Pack Expo.

The food pouches made from the Vivos film literally disappear as the pouch releases its content into hot or cold liquids used for cooking. The film “does not impart any taste or odor and can be consumed along with the food,” Kumar said.

The pouches are currently used on a small scale to package oatmeal, cocoa and some sweeteners.

Kumar said Monosol believes its Vivos Edible Delivery System for foods initially will be particularly appealing to “back of the kitchen operations of food-service companies and food manufacturing operations.”

“Right now, those companies have to open a bag, pre-measure the ingredient and deliver an exact dose” for mixing and batching operations, Kumar said. “Our pouches give you a very convenient product delivery system and are a very efficient way to make foods such as cocoa, hot chocolate, oatmeal and soups. It will reduce processing costs, processing time and improve the accuracy of the operation.”

Other potential applications include fruit drinks, instant teas and coffees, warm breakfast meals, drink powders and sticks, gravies, sauces, pastas, rice, seasonings, salts, vitamin fortifiers and workout supplements, he said.

“We were looking at where we could take our knowledge of water-soluble technology” for packaging products such as automatic dishwasher and laundry detergent and expand it in other market opportunities, Kumar said.

“We felt that foods made through portion control represented the right opportunity because it is a very efficient way to make foods and there is no wrapper to throw away,” he said. “It saves time, and you don’t have to throw the package away” because there is none after it is used. Kumar said.

Like anything new, Kumar said the challenge will be to explain the edible food delivery system to potential customers. But, as he points out, water-based polymers are in use today on chewing gums and as coatings for dietary supplements. “We’re not using anything that hasn’t been used for human consumption before.”

Still, Kumar said, “we are talking about a delivery system that does not exist anywhere in the world and we have to explain it to people because it is a big paradigm shift. But it also is a ready-made eco-friendly system for interested parties.”

“I would think that initially it will be a niche application, but then it could become broad-based,” said Kumar. “We see it taking a similar path to mono-doses in the laundry industry, which now have a 30-40 [percent] share of that market.”

The pouches were developed in partnership with Cloud Packaging Equipment, which manufactures horizontal form, fill, seal Hydroforma pouch packaging machines that can make 1,000 to 2,000 pouches per minute—which Cloud says is 10 times more pouches per minute than vertical pouch packaging machines.

However, the film can also be run on existing vertical form, fill, and seal equipment with slight modifications to control humidity to ensure proper sealing.

Monosol is part of Kuraray Holdings U.S.A. Inc., which is part of Japanese-based specialty chemical company Kuraray Co. Ltd.

Cloud Packaging, based in Des Plaines, Ill., is owned by Ryt-Way Industries LLC in Lakeville, Minn., a contract packager of dry food products such as ready-to-eat cereals, prepared meals, side dishes, beverages and sweeteners.


Comments

MonoSol commercializes water-soluble pouch film

Published: December 7, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

A. Schulman, Citadel continue buying blitz

January 27, 2015 11:32 am ET

A. Schulman Inc. and Citadel Plastics Inc. — two deal-happy materials firms — were at it again in the second half of 2014.    More

Image

It's becoming a seller's market for plastics firms

January 27, 2015 11:37 am ET

The pace of plastics mergers and acquisitions activity slowed a bit in the second half of 2014 — but market watchers have high expectations for ...    More

Image

Materials market sees more deals

January 27, 2015 11:26 am ET

Plastics materials deals showed modest growth in 2014, increasing 6 percent vs. their 2013 total.    More

Image

Kingspan adds more European production with Joris Ide acquisition

January 27, 2015 10:30 am ET

Kingspan Group plc has purchased insulated panels and building systems supplier Joris Ide Group for 315 million euros ($356 million).    More

Image

Bain buying TI Automotive

January 27, 2015 8:49 am ET

After months of speculation, Auburn Hills, Mich.-based TI Automotive Ltd. entered into an agreement Tuesday to be acquired by private equity firm Bain...    More

Market Reports

Plastics in Automotive: Innovation & Emerging Trends

This special report newly released by PN and sponsored by The Conair Group examines current trends in the use of plastics in automotive, materials innovations and the changing landscape. It includes a review of legislative/regulatory activity impacting vehicle development and lightweighting, market opportunities & challenges for mold and toolmakers, innovative design strategies being implemented by major OEMs and suppliers, as well as a review of key indicators in Canada, Mexico, Brazil and China.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molding Market Analysis & Processor Rankings

Plastics News BUNDLED package contains our in-depth Market Analysis of the Injection Molding segment. You will gain keen insight on current trends and our economic outlook.

As a BONUS this includes PN's updated 2014 database of North American Injection Molders RANKED by sales volume. Sort, merge, mail & prospect by end market, materials processed, region, # of plants and more.

Learn more

Upcoming Plastics News Events

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events