Some medical firms pursuing growth in India

By Satnam Singh
Correspondent

Published: December 10, 2012 6:00 am ET

Related to this story

Topics Medical, Injection Molding, Pipe/Profile/Tubing

NEW DELHI (Dec. 10, 11:25 a.m. ET) — A number of Western companies sent representatives to the recent Medtec India trade show in New Delhi. Plastics News correspondent Satnam Singh reported these news briefs from the event.

Majority of 85 percent medical devices are imported in India

The medical plastics market in India is opening up and global players are exploring.

Many companies are looking at the India market due to its sheer size. The Indian health-care sector is recording positive trends year-on-year, but its domestic medical-device manufacturing base can not keep up with demand — therefore, the Indian medical-device industry is largely dependent on imports. Global players are studying the market potential, but few of them entered yet.

As per a study from the Indian health ministry, the global plastics market is estimated to be 386 billion pounds annually and market share of plastics in the health-care sector is merely 1 percent (4 billion pounds annually) out of which commodity plastics like PP, PVC, PE contribute 74 percent.

The Indian health-care sector is estimated at $38 billion yearly and is expected to reach $77 billion by 2013. In the next 15 years, demand is likely to grow at a compound annual growth rate of 15 percent.

The health-care industry in India accounted for 5.1 percent of the country’s gross domestic product in 2006. Expenditures on private health care surged by 227 percent to $33.6 billion in 2010. Interestingly, the share of private expenditures as a percentage of total expenditures increased to 80 percent, from 60 percent. Health-care spending could contribute 8 percent of GDP and is expected to employ 9 million people in 2012 in India.

Wisconsin's SMC expects growth in India

SMC Ltd., a Somerset, Wis.-based medical-device maker, continues to see opportunities for growth in India. The company set up a manufacturing facility there in 2011: SMC Medical Manufacturing Pvt. Ltd. in Bangalore.

“We are planning to manufacture plastic medical devices for cardiovascular, respiratory and orthopedic systems in India and we have started producing a couple of devices for cardiovascular systems in our Bangalore plant,” said B. Balakrishna Menon.

According to Balakrishna, the Indian medical-device market is largely based on imports.

“Around 85 percent of medical devices are still imported and our presence will change the dynamics, as our Bangalore plant will supply directly to OEMs,” he said.

SMC also plans to serve the U.S. and Europe from the Bangalore plant.

“Our Bangalore plant is ideally located for domestic, Asian or European design, manufacture and distribution of medical devices,” Balakrishna said. The plant’s capabilities include device and tool design, prototyping, toolmaking, component molding, subassemblies and finished devices.

Mikron focusing on emerging markets

Biel, Switzerland-based Mikron Group — with plants in Switzerland, Germany, the U.S., Singapore and China — is now shifting its focus to two emerging markets of Asia.

“Earlier, we were focusing more on the European markets, but now focus is on India and China, as both are growing markets,” said Mikron Automation regional sales manager Harald Herrmann. “Potential is there in India, but the degree of automation is low.”

Mikron manufactures high-precision assembly and testing equipment. The company is targeting India’s medical and automotive electronics sectors.

“We have already sold two lines in the India market,” added Harald, who is located in Laupheim, Germany.

Germany’s FLG Automation studying Indian market

FLG Automation AG of Karben, Germany is exploring the Indian medical market for assembly lines for dialysis and filter technology.

“We have not sold any equipment to India as yet; we are studying the market,” said Thomas Simon, sales manager for medical technology.

The company is making dialyzer assembly lines at its plant in Karben. One assembly line can make 2 million to 4 million units annually. FLG also makes equipment that manufactures inhaler caps and devices.

FLG has sold a line in China and appointed Uniway Asia Ltd. of Hong Kong as its manufacturer’s representative. The line cost between $7.7 million and $10 million, he said.

Some firms say Indian market growing slowly

Some companies at Medtec said it’s too soon to act on India’s vast potential in medical devices.

Pawan Urs M. a regional sales manager for quick-disconnect maker Colder Products Co. of St. Paul, Minn., said the market there is certainly growing, but at a slow pace.

“The Indian medical-device market is growing slowly and is in a nascent stage, not comparable to China,” he said. “The high-tech medical devices are largely imported in India. We see lot of potential in this market but it still has long way to go.”

Colder Products has a plant in China and a sales office in Bangalore, India.

Joe Lui, a marketing consultant for Hong Kong-based Zeus Industrial Products Inc., agreed that it is a bit too early for some companies to establish manufacturing in India. His company, which supplies fluoropolymer medical tubing, prefers to begin through a distribution channel.

“The Indian market is growing, but we still have a very limited client base, therefore, we have a distributor in India to take care of the market,” Lui said.

Zeus has its U.S. headquarters in Orangeburg, S.C.


Comments

Some medical firms pursuing growth in India

By Satnam Singh
Correspondent

Published: December 10, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Plastics News Now: Polystyrene helps spur honey production

December 18, 2014 6:00 am ET

Bee farmers are crediting polystyrene with an increase in honey production, plastic toymakers lament shipping delays and plastic bag ban backers are...    More

Image

Indian auto parts maker set to buy assets in Germany, Mexico

December 18, 2014 10:35 am ET

Indian auto parts maker Samvardhana Motherson Gropup is buying the assets of insolvent German plastics car parts producer Scherer & Trier (S&T).    More

Image

Sweden's Indutrade buys Belgian packaging firm Verbeek

December 18, 2014 9:42 am ET

Sweden's Indutrade AB has purchased all the shares in Belgium's Verbeeck Packaging Group.    More

Image

Röchling buys two UK firms

December 18, 2014 9:24 am ET

Germany's Röchling Engineering Plastics SE & Co. KG has expanded its presence in the high-performance plastics market by acquiring two British firms...    More

McCann expanding in Ohio

December 17, 2014 11:59 am ET

Compounding firm McCann Plastics will spend $1.2 million on an expansion project that will create 15 new jobs at its plant in Green, Ohio.    More

Market Reports

Flexible Packaging Trends in North America

Our latest RESEARCH report examines trends in FLEXIBLE PACKAGING impacting the North American market including a review of economic conditions, key drivers of growth, materials pricing, M&A activity, sustainability challenges and the outlook for 2015.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 billion plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our analysts provide insight on business trends, foreign investment, top end markets and plastics processing activity. The report also provides important data on exports, production, employment and value of plastics products manufactured.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

October 27, 2015 - October 29, 2015Plastics Financial Summit - New York - 2015

More Events