European industry wary as Reach deadline looms

Alan Osborn

Published: December 10, 2012 6:00 am ET

Related to this story

Topics Public Policy, Materials, Suppliers

BRUSSELS (Dec. 10, 11:15 a.m. ET) — There is mounting criticism of the European Union’s chemicals registration policy Reach ahead of the May 31 deadline to register with the European Chemicals Agency (ECHA) all phase-in substances made or imported in the EU in quantities of 100 metric tons per year or more.

Despite more than five years of fine tuning since phase one of Reach came into force, the policy remains a source of discontent throughout the plastics supply chain.

Sandra Bohnert, communications manager at PlasticsEurope, the Brussels-based body representing European resin producers, puts it this way: “Clearly, Reach does not give companies any tool to innovate. Innovation in plastics is linked to new catalysts, new or improved production processes and development of new product formulations or recipes — all aspects where Reach cannot bring any positive contribution. On the contrary, the bureaucracy generated can sometimes be felt as a brake on innovation rather than an incentive to develop creativity.”

A good example of this, says Bohnert, are “the very rigid rules governing the registration of monomers, especially for the imported plastics, where the level of detail required by ECHA is amazing, enormous, yet these monomers are no longer present in the plastics put on the EU market.”

Bohnert said the registration procedure should “not invent a new burden or complicated registration dossiers for plastics when, in the rest of the world, simple rules can assess their harmlessness.”

A European Commission report on chemical industry innovation and Reach is very revealing, according to Giorgio Squinzi, president of the Brussels-based European Chemical Industry Council (Cefic).

“Sixty-three percent of respondents indicated that Reach could shift away resources from innovation,” he said at Cefic’s General Assembly in London before he handed the Cefic presidency to Kurt Bock, chairman of BASF SE.

“The Commission’s study also indicates that Reach has cost over 2 billion euros ($2.58 billion) to date. This is the initial cost range for Reach, yet we have only passed through the first registration deadline. This points to two things: one, the costs are high; two, SMEs who enter Reach must find ways to eliminate all unnecessary costs.”

The Commission reported that 43 percent of those surveyed said Reach had had a negative effect on innovation — with 13 percent seeing it as “positive” — but the Commission argued that these were “short-term” effects that would be offset in the longer-term as research and development programs were reoriented.

Squinzi said Cefic wants to make Reach work but foresees that “phases two and three will be especially difficult for small and medium-sized companies, and we have to make it work for them too.”

The European Plastics Converters Association (EuPC) in Brussels represents 55,000 companies in processing, compound and masterbatch formulation and recycling. Walter Claes, the trade association’s director of health, safety and the environment warned that “particular attention” needs to be paid to ongoing restrictions and authorization processes.

“Both risk endangering the future of plastics recycling in Europe by not taking into account the particular situation of recycling,” he said.

All acts of recovery are considered to be “manufacturing” under Reach, so the restriction and authorization rules would apply to recycled substances and mixtures, Claes said.

If Europe is to become a recycling society, then special provisions will have to be made for legacy substances which will be present in waste for years to come, he said.

Claes nevertheless agreed that within the Reach program “several key issues have been addressed quickly and satisfactorily solved.” These include use descriptors and generic exposure scenarios provided by manufacturers for registration, and by formulators for data production. Also in this category is the safety data sheet (SDS) web portal where recyclers can pick up tailor-made generic SDSs, he said.

In the United Kingdom, Reach has had a “varied and complex impact on the plastics industry,” said Philip Law, public and industrial affairs director of the British Plastics Federation in London.

“It is probably most burdensome on manufacturers of materials and additives and some of their importers as they have to register chemicals in the first place,” he noted. “Processors such as molders and packaging manufacturers will face additional bureaucracy if they have notification obligations. Communication throughout the supply chain is imperative if Reach is to work and this will cause additional effort for all.”


Comments

European industry wary as Reach deadline looms

Alan Osborn

Published: December 10, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Investment firm buys Ontario cap molder

October 23, 2014 2:01 pm ET

A company whose varied interests include food and refrigerated transportation businesses is now moving into plastic caps.    More

Image

FTC warns bag makers to take care before making biodegradeability claims

October 23, 2014 12:30 pm ET

Makers of oxodegradable or oxo-biodegradable plastic bags should consider themselves on notice, according to the U.S. Federal Trade Commission.    More

Image

Westlake adding ethylene capacity in Louisiana

October 23, 2014 9:54 pm ET

Westlake Chemical Corp. will add 250 million pounds of annual ethane-based ethylene capacity as part of a $330 million expansion project in Lake...    More

Image

PolyOne increases quarterly profits despite falling sales

October 23, 2014 4:55 pm ET

North American compounding leader PolyOne Corp. saw its third-quarter profit increase, even as sales fell vs. the year-ago period.    More

Image

Toyoda Gosei's growth strategy places a big focus on North America

October 23, 2014 1:21 pm ET

Sometimes, knowing your weaknesses is just as important as knowing your strengths. And if 2014 is any indication, automotive supplier Toyoda Gosei Co....    More

Market Reports

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 million dollar plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our analysts provide insight on business trends, foreign investment, top end markets and plastics processing activity. The report also provides important data on exports, production, employment and value of plastics products manufactured.

Learn more

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events