Some medical firms pursuing growth in India

By Satnam Singh
Correspondent

Published: December 10, 2012 6:00 am ET

Related to this story

Topics Medical, Injection Molding, Pipe/Profile/Tubing

NEW DELHI (Dec. 10, 11:25 a.m. ET) — A number of Western companies sent representatives to the recent Medtec India trade show in New Delhi. Plastics News correspondent Satnam Singh reported these news briefs from the event.

Majority of 85 percent medical devices are imported in India

The medical plastics market in India is opening up and global players are exploring.

Many companies are looking at the India market due to its sheer size. The Indian health-care sector is recording positive trends year-on-year, but its domestic medical-device manufacturing base can not keep up with demand — therefore, the Indian medical-device industry is largely dependent on imports. Global players are studying the market potential, but few of them entered yet.

As per a study from the Indian health ministry, the global plastics market is estimated to be 386 billion pounds annually and market share of plastics in the health-care sector is merely 1 percent (4 billion pounds annually) out of which commodity plastics like PP, PVC, PE contribute 74 percent.

The Indian health-care sector is estimated at $38 billion yearly and is expected to reach $77 billion by 2013. In the next 15 years, demand is likely to grow at a compound annual growth rate of 15 percent.

The health-care industry in India accounted for 5.1 percent of the country’s gross domestic product in 2006. Expenditures on private health care surged by 227 percent to $33.6 billion in 2010. Interestingly, the share of private expenditures as a percentage of total expenditures increased to 80 percent, from 60 percent. Health-care spending could contribute 8 percent of GDP and is expected to employ 9 million people in 2012 in India.

Wisconsin's SMC expects growth in India

SMC Ltd., a Somerset, Wis.-based medical-device maker, continues to see opportunities for growth in India. The company set up a manufacturing facility there in 2011: SMC Medical Manufacturing Pvt. Ltd. in Bangalore.

“We are planning to manufacture plastic medical devices for cardiovascular, respiratory and orthopedic systems in India and we have started producing a couple of devices for cardiovascular systems in our Bangalore plant,” said B. Balakrishna Menon.

According to Balakrishna, the Indian medical-device market is largely based on imports.

“Around 85 percent of medical devices are still imported and our presence will change the dynamics, as our Bangalore plant will supply directly to OEMs,” he said.

SMC also plans to serve the U.S. and Europe from the Bangalore plant.

“Our Bangalore plant is ideally located for domestic, Asian or European design, manufacture and distribution of medical devices,” Balakrishna said. The plant’s capabilities include device and tool design, prototyping, toolmaking, component molding, subassemblies and finished devices.

Mikron focusing on emerging markets

Biel, Switzerland-based Mikron Group — with plants in Switzerland, Germany, the U.S., Singapore and China — is now shifting its focus to two emerging markets of Asia.

“Earlier, we were focusing more on the European markets, but now focus is on India and China, as both are growing markets,” said Mikron Automation regional sales manager Harald Herrmann. “Potential is there in India, but the degree of automation is low.”

Mikron manufactures high-precision assembly and testing equipment. The company is targeting India’s medical and automotive electronics sectors.

“We have already sold two lines in the India market,” added Harald, who is located in Laupheim, Germany.

Germany’s FLG Automation studying Indian market

FLG Automation AG of Karben, Germany is exploring the Indian medical market for assembly lines for dialysis and filter technology.

“We have not sold any equipment to India as yet; we are studying the market,” said Thomas Simon, sales manager for medical technology.

The company is making dialyzer assembly lines at its plant in Karben. One assembly line can make 2 million to 4 million units annually. FLG also makes equipment that manufactures inhaler caps and devices.

FLG has sold a line in China and appointed Uniway Asia Ltd. of Hong Kong as its manufacturer’s representative. The line cost between $7.7 million and $10 million, he said.

Some firms say Indian market growing slowly

Some companies at Medtec said it’s too soon to act on India’s vast potential in medical devices.

Pawan Urs M. a regional sales manager for quick-disconnect maker Colder Products Co. of St. Paul, Minn., said the market there is certainly growing, but at a slow pace.

“The Indian medical-device market is growing slowly and is in a nascent stage, not comparable to China,” he said. “The high-tech medical devices are largely imported in India. We see lot of potential in this market but it still has long way to go.”

Colder Products has a plant in China and a sales office in Bangalore, India.

Joe Lui, a marketing consultant for Hong Kong-based Zeus Industrial Products Inc., agreed that it is a bit too early for some companies to establish manufacturing in India. His company, which supplies fluoropolymer medical tubing, prefers to begin through a distribution channel.

“The Indian market is growing, but we still have a very limited client base, therefore, we have a distributor in India to take care of the market,” Lui said.

Zeus has its U.S. headquarters in Orangeburg, S.C.


Comments

Some medical firms pursuing growth in India

By Satnam Singh
Correspondent

Published: December 10, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Materials firms look for stock rebound

January 29, 2015 1:52 pm ET

DuPont Co., A. Schulman Inc. and Rogers Corp. thrived amid the stock market chaos of 2014, but the other 12 publicly held materials firms tracked by...    More

Image

Chemtrusion, Mytex Indiana compounding plant set for expansion

January 29, 2015 1:35 pm ET

Japanese and American partners in a compounding plant in Indiana plan to expand the facility.    More

Image

DuPont-Chenguang JV to produce fluoroelastomers in China

January 29, 2015 12:30 pm ET

DuPont Fluoropolymer Solutions and Zhonghao Chenguang Chemical Research Institute Co. Ltd. are proceeding with a 50-50 joint venture to serve the...    More

Image

Falcon Plastics expands in South Dakota

January 29, 2015 11:45 am ET

Falcon Plastics Inc. is putting the final touches on a 60,000 square foot addition that will nearly double the size of its Brookings, S.D.,...    More

Image

Plastics News Now: Losing weight with style, plastics in the Dragons' Den

January 29, 2015 6:00 am ET

A 19-year-old entrepreneur brings business to a U.K. injection molder after winning support on TV's Dragons' Den, auto suppliers combine h...    More

Market Reports

Plastics in Automotive: Innovation & Emerging Trends

This special report newly released by PN and sponsored by The Conair Group examines current trends in the use of plastics in automotive, materials innovations and the changing landscape. It includes a review of legislative/regulatory activity impacting vehicle development and lightweighting, market opportunities & challenges for mold and toolmakers, innovative design strategies being implemented by major OEMs and suppliers, as well as a review of key indicators in Canada, Mexico, Brazil and China.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molding Market Analysis & Processor Rankings

Plastics News BUNDLED package contains our in-depth Market Analysis of the Injection Molding segment. You will gain keen insight on current trends and our economic outlook.

As a BONUS this includes PN's updated 2014 database of North American Injection Molders RANKED by sales volume. Sort, merge, mail & prospect by end market, materials processed, region, # of plants and more.

Learn more

Upcoming Plastics News Events

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events