PU foam helps stop battlefield internal bleeding

Published: December 17, 2012 6:00 am ET

Related to this story

Topics Materials Medical Design
Companies & Associations

ARLINGTON, VA. (Dec. 17, 2:15 p.m. ET) — The U.S. Defense Advanced Research Projects Agency (DARPA) has developed a polyurethane foam technology that could increase the survival rate of injured troops in the battlefield.

DARPA made the discovery as part of its Wound Stasis System program, which it launched in 2010 in hopes of finding a technological solution that could mitigate damage from internal bleeding.

Materials company and program participant Arsenal Medical Inc. developed a PU foam-based product that can control hemorrhaging in a patient’s intact abdominal cavity for at least one hour, based on swine injury model data, DARPA said.

The polyurethane forms inside a patient’s body upon injection of polyol and isocyanate into the abdominal cavity. As the liquids mix, two reactions are triggered, DARPA said. First, the mixed liquid expands to about 30 times its original volume while conforming to the surfaces of injured tissue. Second, the liquid transforms into solid foam capable of providing resistance to intra-abdominal blood loss.

During testing, minimally invasive application of the product reduced blood loss six-fold and increased the rate of survival at three hours post-injury to 72 percent from the eight percent observed in controls, the agency reported.

“According to the US Army Institute of Surgical Research, internal hemorrhage is the leading cause of potentially survivable deaths on the battlefield, so the Wound Stasis effort should ultimately translate into an increased rate of survival among warfighters. If testing bears out, the foam technology could affect up to 50 percent of potentially survivable battlefield,” said Brian Holloway, DARPA program manager.

DARPA recently awarded a $15.5 million Phase II contract to Arsenal Medical to continue development of the treatment system and support regulatory submission. DARPA anticipates continuing the Wound Stasis program through to Food and Drug Administration approval of a prototype device, and possibly further.


Comments

PU foam helps stop battlefield internal bleeding

Published: December 17, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Commerce Department agrees to investigate PET dumping complaint

April 1, 2015 1:42 pm ET

UPDATED — A flood of alleged low-priced PET resin imports has led three U.S. PET makers to seek anti-dumping duties.    More

Image

Fire at Texas plant could impact polypropylene market

April 1, 2015 11:21 am ET

UPDATED — No injuries were reported in a March 30 fire at an ExxonMobil Chemical propylene unit in Beaumont, Texas — but the incident...    More

Image

Solegear raising funds as it debuts on TSX Venture stock exchange

April 1, 2015 11:08 am ET

A fledgling bioplastics company has raised capital for growth and obtained a listing on the TSX Venture stock exchange.    More

Image

Lanxess merges PU additives into Rhein Chemie division

April 1, 2015 9:17 am ET

German resin company Lanxess AG has combined the activities of the former Rhein Chemie and its Lanxess functional additives business into a new Rhein ...    More

Image

North American Pipe unit lab to focus on 'modern, innovative' formulations

March 31, 2015 3:25 pm ET

North American Specialty Products LLC — a unit of North American Pipe Corp. — has opened a new material science lab in Leola, Pa.    More

Market Reports

Trends in Resin Distribution

The growth of the North American resin distribution market is undeniable - and industry analysts are confident that growth will continue in 2015 and beyond.

This new report analyzes market trends and provides data on historical sales trends for PE (distribution and resellers), PolyOne Distribution figures, U.S. ethylene expansions based on shale gas and natural gas production by category to 2035.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 billion plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our analysts provide insight on business trends, foreign investment, top end markets and plastics processing activity. The report also provides important data on exports, production, employment and value of plastics products manufactured.

Learn more

Upcoming Plastics News Events

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events