JCI adding 10 auto seating plants in China

By Rhoda Miel
News Editor

Published: December 19, 2012 6:00 am ET

Related to this story

Topics Automotive, Injection Molding

GLENDALE, WIS. (Updated Dec. 19, 12:15 p.m. ET) — Johnson Controls Inc. will invest in another 10 auto seating plants in China as part of a long-term business strategy which continues to expect growth in China and slow expansion in the North American market to offset expected slowdown in Europe.

JCI will also expand its footprint for interiors and electronics in the southern U.S. and Mexico, although the company did not provide any specifics on those plans.

Speaking during a meeting with investors Dec. 19, JCI CEO Steve Roell said he and the company remain “bullish” on China.

“We think it will continue to prosper, though not as fast as it has been,” he said.

The Glendale, Wis.-based company does $5 billion in business in China now with 56 plants between its wholly-owned operations and joint ventures. Roell said it believes it supplies 45 percent of the seats in China.

Although the Chinese auto industry has slowed significantly, he said it is still the largest growth potential globally and JCI has plans to build another 10 facilities during the next five years. He did not discuss any details for those new sites.

That means that essentially JCI will be launching a new seating plant every 18 months in China, said Beda Bolzenius, president of the seating business unit.

“Ninety-nine percent of what we do in China stays in China or in Southeast Asia,” Roell said. “We did not go to China for labor arbitrage, we went to participate in the local market.”

Analysts with Baird Equity Research said in a written report on JCI’s outlook that it sees Johnson Controls “outpacing the market due to meaningful China exposure.”

JCI has also invested in additional capacity to produce individual components for seating, including more capability for metal parts. Roell said that reflects changes within the auto industry in which automakers are now opting to sometimes award contracts for individual parts, rather than the complete seat.

“They’re directing the trim, the foam the metal,” he said.

The company also developed a leadership team that could work with automakers to sell and source those individual parts in addition to complete programs.

“Now we can compete with foam, with cut-and-sew, with metals,” Roell said.

That ability to produce both complete seats and individual components will also expand into China, Bolzenius said. JCI has only 2 to 3 percent of the seating parts business in China now compared to its commanding presence in delivering complete seats. A new focus on components as well as complete seats should bring that parts business up to 20 percent market share.

In 2012, JCI developed a separate business unit for its electronics and auto interiors group – separating it from seating – to reflect the different dynamics of those two groups. Bill Jackson is president of electronics and interiors while Bolzenius, formerly president of the Automotive Experience unit, retains the seating group.

The change comes because interiors and electronics is more capital expenditure intensive than seating and interiors are more likely to see an overhaul during a mid-cycle upgrade to an existing vehicle line than seating is, Roell said.

JCI has an automotive backlog of $3.7 billion in business for 2013 to 2015, which is about even with its previous backlog for the 2012 to 2014 time period. For 2013, it expects its seating business to gain 2 percent over 2012, reflecting growth in North America and China.

Europe stands as a “major headwind” in JCI’s forecast, however.

“We could talk about Europe all day, but I think all of you know about Europe,” he said. “We look at Europe and believe it’s going to take some time. In our case, when we look at the duration [of a downturn] we decided there was nothing we could point at that would see it come back in 2013 or 2014.”

Roell said the company expects European production could decrease by up to double digit percentages in 2013. That will not only impact JCI’s production, it will likely bring unexpected disruptions throughout the supply base as small suppliers shut down, leading to parts issues for others.

“Our thorn is Europe,” Jackson said.

European automakers are already discussing plans to shut down production, including General Motors Co.’s announcement earlier in December to halt production in Bochum, Germany, Opel plant.

JCI will have to adjust its just-in-time operations in Europe to reflect those changes, Bolzenius said, but will be careful where it makes its overall cuts.

“We need to be smart and selective about how [we cut] to avoid significant disruptions,” he said. “We will be a lot more careful on how to cut into operations and how to cut into our critical resources. We will not go for launch teams, for engineering capacities. We will protect these critical resources better than we did during the downturn in 2008 and 2009.”

The interiors and electronics group made money everywhere but Europe in 2012, Jackson noted. Its biggest problem areas for production are also there. At one facility, he said, the plant was seeing an 18 percent scrap rate on one instrument panel program. It has since brought that rate down to about 6 percent, but it is still working with its customer to develop other improvement if possible.

Johnson Controls is also in the process of restructuring where needed in North America to improve capacity. It is closing two plants, including the previously-announced shuttering of one of its two Louisville, Ky., injection molding plants.


Comments

JCI adding 10 auto seating plants in China

By Rhoda Miel
News Editor

Published: December 19, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Auto supplier adds production space, jobs at plant in central Hungary

April 22, 2014 9:50 am ET

Automotive parts manufacturer Ábrahám Kft. has expanded its factory in Túrkéve, in central Hungary, with the launch of a new production hall as part...    More

Image

German electronics firm expanding in Hungary

April 22, 2014 9:46 am ET

German electronics manufacturer Provertha GmbH has announced plans to set up a new plastic galvanizing plant at the Kapuvár Industrial Park, in...    More

Image

Cambro investing $30.4 million in new N.C. injection molding plant

April 18, 2014 2:36 pm ET

Foodservice products manufacturer Cambro Manufacturing Co. Inc. plans to set up a satellite production and distribution operation in Mebane, N.C., to ...    More

Image

Increased orders prompt Georg Utz to add capacity, equipment in Indiana

April 18, 2014 12:20 pm ET

Plastic totes and tray orders have picked up to the point where manufacturer Georg Utz Inc. has added machines, silos and material feed systems to...    More

Image

Ascend targets nylon for auto applications, opening propylene monomer unit in Texas

April 18, 2014 10:57 am ET

Materials firm Ascend Performance Materials Inc. is in full operation at its new nylon 6/6 compounding line in Florida and will break ground by the en...    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook – North America

This in-depth report provides analysis and discussions of economic and political conditions, market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as strategies being implemented by thermoformed packaging companies. In addition, there are reviews of 25 leading thermoformers in the packaging segment, assessing their growth initiatives and performance metrics over 10 years.

Learn more

Automotive Market Review and Outlook 2014 – The Americas

This 75-page report features in-depth analysis of the automotive industry for the Americas. It includes discussions of market trends, legislative/regulatory activity impacting production and threats as well as design strategies being implemented by the major automakers. Detailed charts and data tables outline North American automotive production over the last five years.

Learn more

Plastics Building & Construction Market Review and Outlook 2014 with MS Excel chart data

This report provides in-depth analysis of the plastic building and construction market for North America, including discussions of trends, opportunities, threats and the latest developments in construction trends that impact plastics processors.

Learn more

Upcoming Plastics News Events

May 6, 2014 - May 8, 2014Plastics in Medical Devices 2014

May 12, 2014 - May 12, 2014Plastics News Brazil Pharma Summit

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

February 3, 2015 - February 7, 2015Plastics News Executive Forum 2015

More Events