JCI adding 10 auto seating plants in China

By Rhoda Miel
News Editor

Published: December 19, 2012 6:00 am ET

Related to this story

Topics Automotive, Injection Molding

GLENDALE, WIS. (Updated Dec. 19, 12:15 p.m. ET) — Johnson Controls Inc. will invest in another 10 auto seating plants in China as part of a long-term business strategy which continues to expect growth in China and slow expansion in the North American market to offset expected slowdown in Europe.

JCI will also expand its footprint for interiors and electronics in the southern U.S. and Mexico, although the company did not provide any specifics on those plans.

Speaking during a meeting with investors Dec. 19, JCI CEO Steve Roell said he and the company remain “bullish” on China.

“We think it will continue to prosper, though not as fast as it has been,” he said.

The Glendale, Wis.-based company does $5 billion in business in China now with 56 plants between its wholly-owned operations and joint ventures. Roell said it believes it supplies 45 percent of the seats in China.

Although the Chinese auto industry has slowed significantly, he said it is still the largest growth potential globally and JCI has plans to build another 10 facilities during the next five years. He did not discuss any details for those new sites.

That means that essentially JCI will be launching a new seating plant every 18 months in China, said Beda Bolzenius, president of the seating business unit.

“Ninety-nine percent of what we do in China stays in China or in Southeast Asia,” Roell said. “We did not go to China for labor arbitrage, we went to participate in the local market.”

Analysts with Baird Equity Research said in a written report on JCI’s outlook that it sees Johnson Controls “outpacing the market due to meaningful China exposure.”

JCI has also invested in additional capacity to produce individual components for seating, including more capability for metal parts. Roell said that reflects changes within the auto industry in which automakers are now opting to sometimes award contracts for individual parts, rather than the complete seat.

“They’re directing the trim, the foam the metal,” he said.

The company also developed a leadership team that could work with automakers to sell and source those individual parts in addition to complete programs.

“Now we can compete with foam, with cut-and-sew, with metals,” Roell said.

That ability to produce both complete seats and individual components will also expand into China, Bolzenius said. JCI has only 2 to 3 percent of the seating parts business in China now compared to its commanding presence in delivering complete seats. A new focus on components as well as complete seats should bring that parts business up to 20 percent market share.

In 2012, JCI developed a separate business unit for its electronics and auto interiors group – separating it from seating – to reflect the different dynamics of those two groups. Bill Jackson is president of electronics and interiors while Bolzenius, formerly president of the Automotive Experience unit, retains the seating group.

The change comes because interiors and electronics is more capital expenditure intensive than seating and interiors are more likely to see an overhaul during a mid-cycle upgrade to an existing vehicle line than seating is, Roell said.

JCI has an automotive backlog of $3.7 billion in business for 2013 to 2015, which is about even with its previous backlog for the 2012 to 2014 time period. For 2013, it expects its seating business to gain 2 percent over 2012, reflecting growth in North America and China.

Europe stands as a “major headwind” in JCI’s forecast, however.

“We could talk about Europe all day, but I think all of you know about Europe,” he said. “We look at Europe and believe it’s going to take some time. In our case, when we look at the duration [of a downturn] we decided there was nothing we could point at that would see it come back in 2013 or 2014.”

Roell said the company expects European production could decrease by up to double digit percentages in 2013. That will not only impact JCI’s production, it will likely bring unexpected disruptions throughout the supply base as small suppliers shut down, leading to parts issues for others.

“Our thorn is Europe,” Jackson said.

European automakers are already discussing plans to shut down production, including General Motors Co.’s announcement earlier in December to halt production in Bochum, Germany, Opel plant.

JCI will have to adjust its just-in-time operations in Europe to reflect those changes, Bolzenius said, but will be careful where it makes its overall cuts.

“We need to be smart and selective about how [we cut] to avoid significant disruptions,” he said. “We will be a lot more careful on how to cut into operations and how to cut into our critical resources. We will not go for launch teams, for engineering capacities. We will protect these critical resources better than we did during the downturn in 2008 and 2009.”

The interiors and electronics group made money everywhere but Europe in 2012, Jackson noted. Its biggest problem areas for production are also there. At one facility, he said, the plant was seeing an 18 percent scrap rate on one instrument panel program. It has since brought that rate down to about 6 percent, but it is still working with its customer to develop other improvement if possible.

Johnson Controls is also in the process of restructuring where needed in North America to improve capacity. It is closing two plants, including the previously-announced shuttering of one of its two Louisville, Ky., injection molding plants.


Comments

JCI adding 10 auto seating plants in China

By Rhoda Miel
News Editor

Published: December 19, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

The Technology House moves to larger Ohio location

December 22, 2014 1:22 pm ET

A need for more space is leading industrial manufacturing firm the Technology House Ltd. to move from Solon, Ohio, to nearby Streetsboro.    More

Image

The return of HPM's big presses

December 19, 2014 11:47 am ET

HPM is back in big injection molding machines.    More

Image

Jarden hiring for new plastics plant

December 19, 2014 1:45 pm ET

Consumer products conglomerate Jarden Corp. is hiring plastics technicians for a new operation in Erlanger, Ky.    More

Image

Sabic: Rapid demand growth led to Ultem shortage

December 18, 2014 12:06 pm ET

Sabic Innovative Plastics has been increasing production capacity for its Ultem polyetherimide but it still got caught short by increasing demand for ...    More

Auto supplier M-Tek relocating headquarters

December 18, 2014 3:37 pm ET

M-Tek Inc., a subsidiary of Japanese automotive supplier Kasai Kogyo Co. Ltd., will build a new North American corporate headquarters in Murfreesboro,...    More

Market Reports

Flexible Packaging Trends in North America

Our latest RESEARCH report examines trends in FLEXIBLE PACKAGING impacting the North American market including a review of economic conditions, key drivers of growth, materials pricing, M&A activity, sustainability challenges and the outlook for 2015.

Learn more

Plastics in Brazil - State of the Industry Report

This in-depth report examines the Brazilian plastics industry from a historical and geographical context. Our analysts provide insight on economic trends and forecasts, growing manufacturing sectors that utilize plastics, private investment opportunities, market environment challenges, and innovations in R&D.

Data tables and charts on producer prices, trade, plastics production and end market indicators is also included.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

October 27, 2015 - October 29, 2015Plastics Financial Summit - New York - 2015

More Events