Sepro, Stäubli team up on robots

By Bill Bregar
Senior Staff Reporter

Published: December 19, 2012 6:00 am ET

Sepro’s 6X is a Stäubli six-axis, articulating-arm robot. Here it handles a bumper fascia at Fakuma 2012 in Friedrichshafen, Germany. (Plastics News photo by Bill Bregar)

Related to this story

Topics Machinery

FRIEDRICHSHAFEN, GERMANY (Dec. 19, 10:45 a.m. ET) — French automation supplier Sepro Robotique exhibited 16 robots at Fakuma 2012 — highlighted by new five- and six-axis robots designed to let customers do complex part manipulation right at the press.

Sepro also is getting into robots for in-mold labeling.

Sepro teamed with Stäubli Robotics of Switzerland for the new line, called 5X and 6X. Sepro makes beam robots, also called Cartesian robots, which extend down into the mold from the top. Stäubli specializes in articulating six-axis robots that reach in, like an arm, from the side.

The two companies began working together in 2006, as Sepro integrated Stäubli robots for certain part-handling applications. At Fakuma, they took that relationship a step further.

Sepro Managing Director Jean-Michel Renaudeau said injection molders have been forced to choose between Cartesian beam robots that usually are limited to three axes of motion, or a six-axis robot designed for more-general industrial applications.

So the philosophy is not to impose five or six axes, Renaudeau said at a news conference Oct. 17 at Fakuma. “The philosophy is to give [more] choices.”

The 6X is a Stäubli six-axis articulating-arm robot, run by Septo’s new Visual 3 controller. It is available in five models to run on injection molding presses with clamping forces from 20-4,000 tons.

The 5X line equips a Sepro three-axis beam robot with a compact, two-axis Stäubli wrist. That allows the robot to do complex movements such as place inserts into the mold, follow complex extraction paths to the mold and do path tracking for flame treating. The 5X comes in three models, for presses from 30-800 tons.

The Visual 3 controller also handles the 5X. That’s a big selling point for plastics injection molders, said Claude Bernard, Sepro’s key accounts manager. “From the simple robot to the more advanced robot, you still have the same navigation concept, the same use for control,” he said.

Fakuma also marked the introduction of Sepro’s Visual 3 controller, which features a double central-processing-unit architecture. One processor is dedicated to the operator interface control pendant. The other is for real-time control of robot positioning and movement, including secondary operations. Visual 3 has a 10-inch, touch-sensitive screen. A joystick allows operators to steer the robot, fine-tuning its movements.

Renaudeau said the Fakuma show, held in southern Germany, was a good time to introduce the 5X and 6X. “Germany is at the heart of the European plastics industry, a trend-setting region for the rest of the world and a very important market for Sepro Robotique,” he said.

The French robot maker has expanded its sales and service network in Germany by opening a German headquarters in Dietzenbach, headed by Dirk Schr"der. “We want to significantly increase market share in Germany,” he said.

Sepro is the No. 1 robot company in Europe that is independent, and not linked with any one injection press maker, Renaudeau said. He claimed that Sepro has about 20 percent of the U.S. market.

“All the big players in automotive are using Sepro robots,” he said. Sepro has been moving into robots for smaller-tonnage machines.

Sepro, based in La Roche-sur-Yon, France, employs 300 people and had 2012 turnover of more than 55 million euros ($71 million).

Also at Fakuma, Sepro:

• Demonstrated in-mold labeling robots, under a partnership with Machines Pages Group TRP, a maker of IML modules based in Foncine-le-Haut, France. At Fakuma, Sepro molded pails with wraparound labels. The Sepro SE 350 side-entry robot removed the parts and placed the label in the mold for the next set of pails.

Sepro is offering IML robots for injection presses from 100-500 tons.

• Announced three new sizes of its Success line of robots. The four sizes work on injection presses ranging from 20-70 tons. Success robots, which follow the Sepro Axess robots, are faster and can handle bigger, heavier parts, the company said.

• Introduced a servo-driven sprue picker, the S3, for presses from 30-200 tons. Sepro said the servo-driven picker is faster, more accurate and repeatable than a pneumatic picker robot.


Comments

Sepro, Stäubli team up on robots

By Bill Bregar
Senior Staff Reporter

Published: December 19, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Gerd Liebig returns to Demag business

January 19, 2015 8:33 am ET

UPDATED — Gerd Liebig, the former head marketing manager of Engel Holding GmbH, has been appointed managing director-chief sales officer at...    More

Image

Expect to see Baxter's 'face' in more plants this year

January 16, 2015 12:32 pm ET

Expect many more Baxters working on the manufacturing floor this year.    More

Image

Romi drops the Sandretto badge

January 16, 2015 12:26 pm ET

Brazilian injection molding machinery group Indústrias Romi SA is dropping the Sandretto badge from the beginning of this year.    More

Image

Reifenhauser Kiefel Extrusion changes its name to Reifenhauser Blown Film

January 15, 2015 9:40 am ET

Reifenhauser Kiefel Extrusion has been renamed Reifenhauser Blown Film, and parent company Reifenhauser GmbH is investing more than 2 million euros...    More

Image

KraussMaffei, 3Con to make complete auto interior molding system

January 13, 2015 11:30 am ET

KraussMaffei AG is building on its reaction process machinery in the area of automotive interior trim, partnering with Austrian laminating, thermoform...    More

Market Reports

Plastics in Automotive: Innovation & Emerging Trends

This special report newly released by PN and sponsored by The Conair Group examines current trends in the use of plastics in automotive, materials innovations and the changing landscape. It includes a review of legislative/regulatory activity impacting vehicle development and lightweighting, market opportunities & challenges for mold and toolmakers, innovative design strategies being implemented by major OEMs and suppliers, as well as a review of key indicators in Canada, Mexico, Brazil and China.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molding Market Analysis & Processor Rankings

Plastics News BUNDLED package contains our in-depth Market Analysis of the Injection Molding segment. You will gain keen insight on current trends and our economic outlook.

As a BONUS this includes PN's updated 2014 database of North American Injection Molders RANKED by sales volume. Sort, merge, mail & prospect by end market, materials processed, region, # of plants and more.

Learn more

Upcoming Plastics News Events

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events