Sepro, Stäubli team up on robots

By Bill Bregar
Senior Staff Reporter

Published: December 19, 2012 6:00 am ET

Sepro’s 6X is a Stäubli six-axis, articulating-arm robot. Here it handles a bumper fascia at Fakuma 2012 in Friedrichshafen, Germany. (Plastics News photo by Bill Bregar)

Related to this story

Topics Machinery

FRIEDRICHSHAFEN, GERMANY (Dec. 19, 10:45 a.m. ET) — French automation supplier Sepro Robotique exhibited 16 robots at Fakuma 2012 — highlighted by new five- and six-axis robots designed to let customers do complex part manipulation right at the press.

Sepro also is getting into robots for in-mold labeling.

Sepro teamed with Stäubli Robotics of Switzerland for the new line, called 5X and 6X. Sepro makes beam robots, also called Cartesian robots, which extend down into the mold from the top. Stäubli specializes in articulating six-axis robots that reach in, like an arm, from the side.

The two companies began working together in 2006, as Sepro integrated Stäubli robots for certain part-handling applications. At Fakuma, they took that relationship a step further.

Sepro Managing Director Jean-Michel Renaudeau said injection molders have been forced to choose between Cartesian beam robots that usually are limited to three axes of motion, or a six-axis robot designed for more-general industrial applications.

So the philosophy is not to impose five or six axes, Renaudeau said at a news conference Oct. 17 at Fakuma. “The philosophy is to give [more] choices.”

The 6X is a Stäubli six-axis articulating-arm robot, run by Septo’s new Visual 3 controller. It is available in five models to run on injection molding presses with clamping forces from 20-4,000 tons.

The 5X line equips a Sepro three-axis beam robot with a compact, two-axis Stäubli wrist. That allows the robot to do complex movements such as place inserts into the mold, follow complex extraction paths to the mold and do path tracking for flame treating. The 5X comes in three models, for presses from 30-800 tons.

The Visual 3 controller also handles the 5X. That’s a big selling point for plastics injection molders, said Claude Bernard, Sepro’s key accounts manager. “From the simple robot to the more advanced robot, you still have the same navigation concept, the same use for control,” he said.

Fakuma also marked the introduction of Sepro’s Visual 3 controller, which features a double central-processing-unit architecture. One processor is dedicated to the operator interface control pendant. The other is for real-time control of robot positioning and movement, including secondary operations. Visual 3 has a 10-inch, touch-sensitive screen. A joystick allows operators to steer the robot, fine-tuning its movements.

Renaudeau said the Fakuma show, held in southern Germany, was a good time to introduce the 5X and 6X. “Germany is at the heart of the European plastics industry, a trend-setting region for the rest of the world and a very important market for Sepro Robotique,” he said.

The French robot maker has expanded its sales and service network in Germany by opening a German headquarters in Dietzenbach, headed by Dirk Schr"der. “We want to significantly increase market share in Germany,” he said.

Sepro is the No. 1 robot company in Europe that is independent, and not linked with any one injection press maker, Renaudeau said. He claimed that Sepro has about 20 percent of the U.S. market.

“All the big players in automotive are using Sepro robots,” he said. Sepro has been moving into robots for smaller-tonnage machines.

Sepro, based in La Roche-sur-Yon, France, employs 300 people and had 2012 turnover of more than 55 million euros ($71 million).

Also at Fakuma, Sepro:

• Demonstrated in-mold labeling robots, under a partnership with Machines Pages Group TRP, a maker of IML modules based in Foncine-le-Haut, France. At Fakuma, Sepro molded pails with wraparound labels. The Sepro SE 350 side-entry robot removed the parts and placed the label in the mold for the next set of pails.

Sepro is offering IML robots for injection presses from 100-500 tons.

• Announced three new sizes of its Success line of robots. The four sizes work on injection presses ranging from 20-70 tons. Success robots, which follow the Sepro Axess robots, are faster and can handle bigger, heavier parts, the company said.

• Introduced a servo-driven sprue picker, the S3, for presses from 30-200 tons. Sepro said the servo-driven picker is faster, more accurate and repeatable than a pneumatic picker robot.


Comments

Sepro, Stäubli team up on robots

By Bill Bregar
Senior Staff Reporter

Published: December 19, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Haitian to start assembly of injection presses in India

August 25, 2014 2:59 pm ET

Chinese press maker Haitian International Holdings Ltd. plans to expand its operation in India.    More

Image

Reiloy Westland to build new headquarters

August 22, 2014 12:53 pm ET

Reiloy Westland Corp. will build a 45,000-square-foot headquarters factory, as the Kansas maker of screws and barrels expands under the ownership of...    More

Image

Milacron commits $30 million to investment in India

August 20, 2014 5:42 pm ET

MUMBAI (Updated) — Cincinnati-based Milacron LLC plans to invest $30 million over the next three years in India. The investments will double...    More

Image

Trade group lists China's top plastics machinery manufacturers

August 15, 2014 9:58 am ET

The China Plastic Machine Industry Association has unveiled its latest rankings of the top 25 plastics machinery suppliers in China as well as...    More

Image

Wittmann Battenfeld adding machining center in Austria

August 15, 2014 9:42 am ET

Austrian injection molding and auxiliary equipment machinery company Wittmann Battenfeld GmbH is already increasing capacity of the new assembly hall ...    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report analyzes economic and market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as growth strategies being implemented by thermoformed packaging companies.

Learn more

Pipe, Profile & Tubing Extrusion in North America 2014

U.S. demand for extruded plastics is expected to grow by 3 percent in 2014, with PVC remaining the largest segment.

Plastic pipe will post the strongest gains through 2018, continuing to take market share from competing materials in a range of markets.

Our latest market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Learn more

2014 Injection Molding Industry Report

GROWTH, OPPORTUNITY IN SIGHT FOR INJECTION MOLDERS IN 2014

In the wake of the economic turbulence earlier in this decade, molders today find themselves in much better shape. Molders are gaining a competitive advantage by investing in people, equipment and seeking inroads into new markets on a global scale.

Growth in the injection molding industry is going to be driven by low financing costs and a continued move to reshore some business.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events