Egg container is injection molded

By Bill Bregar
Senior Staff Reporter

Published: December 21, 2012 6:00 am ET

Udo Bodner displays his company's polypropylene chickPack. (Plastics News photo by Bill Bregar)

Related to this story

Topics Packaging, Injection Molding, Machinery

FRIEDRICHSHAFEN, GERMANY (Dec. 21, 1:35 p.m. ET) — Udo Bodmer has built a better egg carton: the injection molded chickPack.

“This is brand new. The market is cardboard and vacuum formed. Injection molding is new,” said Bodmer, a mold maker with 30 years of experience. At the Fakuma trade show in Germany, Ferromatik Milacron GmbH was molding chickPacks on a hybrid F-Series press with of 160 metric tons of clamping force.

Ferromatik Milacron touted Bodmer’s egg package as the first multicomponent machine in its modular F-Series, which was introduced at the K 2010 show. Both components — the top and bottom of the carton — are transparent polypropylene, but on the Fakuma package, the top was clear and the bottom was yellow, the color of an egg yoke.

The two-color, living-hinge cartons for six eggs attracted plenty of attention as the hybrid F 160-2F press churned them out. Bodmer explained there is a technical reason behind the two-component design.

“The two components give us the possibility for two colors. But the main reason was to reduce the clamping force at least 50 percent,” he said.

In the first step, the vertical injection unit molds the top lid, and applies an in-mold label. Then the main injection unit molds the bottom. In the mold, the two parts are arranged left and right from the bottom and joined at the base with hinges that allow each top half of to be opened individually, like a clamshell.

The chickPack is tamper-evident, something current cardboard cartons are not. Plus you can see the eggs inside, eliminating the need to open it to check for cracked eggs.

Attendees of Fakuma, held Oct. 16-20 in Fried­richshafen, stopped to watch the Ferromatik press efficiently churn out chickPacks on a 2.6-second cycle.

“Cycle time is absolutely a key thing — material costs and cycle time” to allow injection molding to compete against the cardboard egg carton.

The chickPack is 50 percent lighter and takes up 50 percent of the stack-height space. “The big advantage is transportation and logistics,” Bodmer said. Also, the package fits in those egg-shaped indentions on a refrigerator door. “You open the fridge, you see right away exactly how many eggs you have,” he said.

Bodmer worked at Foboha GmbH and its sister company AWM Mold Tech AG. Three years ago, he started his own company, called solutionB, in Hausach, Germany. He thought up the egg package.

“I went to my designer and told him what I wanted to do, what that package needs to be, and I influenced it with my technical background. Because, this is a mass-market product, and the important thing is the piece price must be on the same level than the package we like to compete with,” he said.

The chickPack is Bodmer’s own product. But solutionB offers his product-development services to other firms, from generating ideas through product launch. Bod­mer said wants to sell the chickPack package. In some countries, he would grant a license to sell the entire system. In other regions, such as Europe, he will market it directly to egg suppliers, and then look for molders close to the egg company.

A company does not have to be in packaging already to handle chickPack, but that certainly helps, he said.

An egg company also could do the molding in-house, a process called self-manufacturing.


Comments

Egg container is injection molded

By Bill Bregar
Senior Staff Reporter

Published: December 21, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Acquisition expands Rieke Packaging's stake in Asia

July 28, 2014 4:39 pm ET

Diversified rigid packaging components producer Rieke Packaging Systems now has a bigger footprint in Asia.    More

Image

Deal combines US packaging thermoformers

July 28, 2014 12:42 pm ET

Thermoformed medical packager Nelipak Corp. is expanding its North American holdings and access to the U.S. health care market with the purchase of...    More

Image

Gear pump maker Witte expands in Germany and USA

July 25, 2014 2:15 pm ET

Witte Pumps & Technology GmbH, the German maker of gear pumps for extrusion, has moved into a new headquarters factory in the Hamburg area, and the...    More

Image

Sealed Air's move to Charlotte will put it all under 'One Roof'

July 25, 2014 2:03 pm ET

Sealed Air Corp. shook the ground last week by announcing plans to relocate its headquarters from Elmwood Park, N.J., to Charlotte, N.C., in a move...    More

Image

Columbine Plastics moving to new Colorado site

July 25, 2014 11:38 am ET

Custom injection molder Columbine Plastics Corp. plans to move from Boulder, Colo., to the Colorado Technical Center in Louisville, Colo.    More

Market Reports

Plastics Recyclers Data Report & Directory

This exclusive MS Excel database contains all the companies from Plastics News' ranking of top North American Recyclers and Brokers by reprocessed volume and also includes a directory with materials processes, services offered and company contact information. Data is based on primary research by PN editorial staff.

Learn more

2014 Injection Molding Industry Report

GROWTH, OPPORTUNITY IN SIGHT FOR INJECTION MOLDERS IN 2014

In the wake of the economic turbulence earlier in this decade, molders today find themselves in much better shape. Molders are gaining a competitive advantage by investing in people, equipment and seeking inroads into new markets on a global scale.

Growth in the injection molding industry is going to be driven by low financing costs and a continued move to reshore some business.

Learn more

Shale Gas Market - Analysis of North American Region

This report highlights the impact of shale-based natural gas on the North American plastics market and features an in-depth analysis of production trends in the United States during 2013 and a forecast for 2014 and beyond.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events