Plasan to launch new carbon-fiber process

By Bill Bregar
Senior Staff Reporter

Published: December 21, 2012 6:00 am ET

Lownsdale

Related to this story

Topics Automotive

LIVONIA, MICH. (Dec. 21, 10:50 a.m. ET) — At the Plastics in Lightweight Vehicles conference, Plasan Carbon Composites Inc.’s chief technology officer, Gary Lownsdale, gave more details about a new rapid-curing molding process that he says is much faster than traditional autoclave technology for making auto parts.

Now Plasan is in the pre-production stage at an expanded factory in Walker, Mich., near Grand Rapids. In 2013, the company will begin making parts on seven presses from Globe Machine Co.

After investing $6 million over several years of research and development, Plasan engineers had their “eureka moment” in 2010, Lownsdale said. They had studied the manufacturing process and synthesized the variables of autoclaving into a computer.

Lownsdale said current autoclave molding techniques have a 90-minute cycle. That’s fine for low-volume vehicles or aerospace parts, but the process needs to be faster to get carbon-fiber-reinforced plastics into more mainstream cars. The new process takes just 17 minutes.

The Plasan team had to find, or build, new machinery to use the new process. They ended up working with Globe Machine, a 97-year-old company in Tacoma, Wash., that makes compression molding machines and handling equipment for the plywood, particle board, wooden I-beams and paper-handling industries.

“When they first looked at our graphs and charts, they understood exactly what we wanted to get done,” Lownsdale said. “Within 10 months, we had an operating piece of equipment.”

Plasan and Globe Machine entered into a long-term development project. Plasan calls the compression process a “pressure press.” Globe’s brand name is Rapid Cure.

“Our system is a replacement for an autoclave,” said Ron Jacobsen, Globe’s projects manager, who attended the conference, held Nov. 6-7 in Livonia.

Lownsdale declined to say what parts Plasan will make with the Pressure Press, or identify the carmaker. Plasan already makes carbon-fiber-reinforced hoods, roofs and trunk lids for Chrysler’s Dodge Viper. At the Society of Plastics Engineers Innovation Awards, Chrysler Group LLC won the Body Exterior Award for the hood of the 2013 SRT Viper, molded by Plasan.

SPE’s Automotive Division honored Lownsdale with an Innovation Lifetime Achievement Award at the ceremony, held Nov. 7, after Plastics in Lightweight Vehicles, which was organized by Plastics News.

The Viper is a high-end sports car. Now Lownsdale, an automotive composites veteran since the 1960s, said faster cycle times will help carbon fiber break through to a more base-level car in 2014.

Lownsdale said one bottleneck is layup of the fiber-reinforced parts. Plasan is working on robotic layup, which he said can happen within the next few years.


Comments

Plasan to launch new carbon-fiber process

By Bill Bregar
Senior Staff Reporter

Published: December 21, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Image

Visteon in talks to sell its stake in Halla Visteon Climate Control JV

November 26, 2014 9:07 am ET

Visteon Corp. confirmed this morning that it is in discussions with a private equity firm to sell its stake in South Korean joint venture Halla...    More

Image

Canada's Papp Plastics is eyeing big opportunities with JV in Mexico

November 24, 2014 4:11 pm ET

Canadian injection molder and turnkey solution provider Papp Plastics & Distributing Ltd. will open an $11 million to $12 million joint venture...    More

Image

Indiana injection molder PRD expands

November 24, 2014 1:56 pm ET

Automotive supplier PRD Inc. is expanding its manufacturing facility in Springville, Ind.    More

Image

Can plastics return to the driver's seat?

November 24, 2014 6:00 am ET

When the June 1989 issue of Popular Science introduced three cutting-edge automotive technologies, including the latest Corvette and a powerful...    More

Image

New GM purchasing chief faces big hurdles to improve supplier relations

November 24, 2014 11:11 am ET

Steve Kiefer is moving into the eternal hot seat that is head of GM global purchasing and supply chain.    More

Market Reports

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 billion plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our analysts provide insight on business trends, foreign investment, top end markets and plastics processing activity. The report also provides important data on exports, production, employment and value of plastics products manufactured.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

October 27, 2015 - October 29, 2015Plastics Financial Summit - New York - 2015

More Events