Plasan to launch new carbon-fiber process

By Bill Bregar
Senior Staff Reporter

Published: December 21, 2012 6:00 am ET

Related to this story

Topics Automotive

LIVONIA, MICH. (Dec. 21, 10:50 a.m. ET) — At the Plastics in Lightweight Vehicles conference, Plasan Carbon Composites Inc.’s chief technology officer, Gary Lownsdale, gave more details about a new rapid-curing molding process that he says is much faster than traditional autoclave technology for making auto parts.

Now Plasan is in the pre-production stage at an expanded factory in Walker, Mich., near Grand Rapids. In 2013, the company will begin making parts on seven presses from Globe Machine Co.

After investing $6 million over several years of research and development, Plasan engineers had their “eureka moment” in 2010, Lownsdale said. They had studied the manufacturing process and synthesized the variables of autoclaving into a computer.

Lownsdale said current autoclave molding techniques have a 90-minute cycle. That’s fine for low-volume vehicles or aerospace parts, but the process needs to be faster to get carbon-fiber-reinforced plastics into more mainstream cars. The new process takes just 17 minutes.

The Plasan team had to find, or build, new machinery to use the new process. They ended up working with Globe Machine, a 97-year-old company in Tacoma, Wash., that makes compression molding machines and handling equipment for the plywood, particle board, wooden I-beams and paper-handling industries.

“When they first looked at our graphs and charts, they understood exactly what we wanted to get done,” Lownsdale said. “Within 10 months, we had an operating piece of equipment.”

Plasan and Globe Machine entered into a long-term development project. Plasan calls the compression process a “pressure press.” Globe’s brand name is Rapid Cure.

“Our system is a replacement for an autoclave,” said Ron Jacobsen, Globe’s projects manager, who attended the conference, held Nov. 6-7 in Livonia.

Lownsdale declined to say what parts Plasan will make with the Pressure Press, or identify the carmaker. Plasan already makes carbon-fiber-reinforced hoods, roofs and trunk lids for Chrysler’s Dodge Viper. At the Society of Plastics Engineers Innovation Awards, Chrysler Group LLC won the Body Exterior Award for the hood of the 2013 SRT Viper, molded by Plasan.

SPE’s Automotive Division honored Lownsdale with an Innovation Lifetime Achievement Award at the ceremony, held Nov. 7, after Plastics in Lightweight Vehicles, which was organized by Plastics News.

The Viper is a high-end sports car. Now Lownsdale, an automotive composites veteran since the 1960s, said faster cycle times will help carbon fiber break through to a more base-level car in 2014.

Lownsdale said one bottleneck is layup of the fiber-reinforced parts. Plasan is working on robotic layup, which he said can happen within the next few years.


Comments

Plasan to launch new carbon-fiber process

By Bill Bregar
Senior Staff Reporter

Published: December 21, 2012 6:00 am ET

Post Your Comments


Back to story


More stories

Auto supplier adds production space, jobs at plant in central Hungary

April 22, 2014 9:50 am ET

Automotive parts manufacturer Ábrahám Kft. has expanded its factory in Túrkéve, in central Hungary, with the launch of a new production hall as part...    More

Image

Ascend targets nylon for auto applications, opening propylene monomer unit in Texas

April 18, 2014 10:57 am ET

Materials firm Ascend Performance Materials Inc. is in full operation at its new nylon 6/6 compounding line in Florida and will break ground by the...    More

Image

German auto supplier Dr. Schneider opens second US plant

April 17, 2014 12:57 pm ET

Dr. Schneider Kunststoffwerke GmbH, a German supplier of plastic interior auto parts, has opened a $29 million manufacturing plant in Russell Springs,...    More

Huntingdon Fiberglass launching second line

April 16, 2014 2:18 pm ET

Huntingdon Fiberglass Products LLC is getting set to start up a second production line later this year and hire 15-20 new employees as it sees demand ...    More

Mexico reports rising auto production

April 14, 2014 1:18 pm ET

MEXICO CITY — Mexico’s automotive industry assembled an unprecedented 774,731 light vehicles in the first quarter, 6.5 percent up on the 7...    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook – North America

This in-depth report provides analysis and discussions of economic and political conditions, market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as strategies being implemented by thermoformed packaging companies. In addition, there are reviews of 25 leading thermoformers in the packaging segment, assessing their growth initiatives and performance metrics over 10 years.

Learn more

Automotive Market Review and Outlook 2014 – The Americas

This 75-page report features in-depth analysis of the automotive industry for the Americas. It includes discussions of market trends, legislative/regulatory activity impacting production and threats as well as design strategies being implemented by the major automakers. Detailed charts and data tables outline North American automotive production over the last five years.

Learn more

Plastics Building & Construction Market Review and Outlook 2014 with MS Excel chart data

This report provides in-depth analysis of the plastic building and construction market for North America, including discussions of trends, opportunities, threats and the latest developments in construction trends that impact plastics processors.

Learn more

Upcoming Plastics News Events

May 6, 2014 - May 8, 2014Plastics in Medical Devices 2014

May 12, 2014 - May 12, 2014Plastics News Brazil Pharma Summit

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

February 3, 2015 - February 7, 2015Plastics News Executive Forum 2015

More Events